I have a few objections 1. Darts don’t get chewed up like that 2. Even if it did go forward the dart still wouldn’t get chewed 3. I have watched a couple videos on this gun so I know that this is probably a 1/100 chance of happening A TIME 4. How were you using it cause even slam fire doesn’t do this
"Darts don't get chewed up like that" uh, did you watch the entire video? he literally showed the jammed dart and pulling out that dart will cause darts to get chewed up. you cant even take apart the blaster, let alone expect the dart to come out in perfect shape.
@@CapAmerica10 you have a point with the bad darts, but why would you do that intentionally? i bought a thrifted nerf tristrike and i had the same problem, except with that I COULD OPEN THE BLASTER
@@bananers9174 I’m not sure, people on the internet would do crazy things. Also if it was thrifted and you could open it, the original owner must Harv tried to modify it but ended up failing which is probably why you had the problem.
There is a slide release on the left face of the gun which allows you to re-rack it before firing, but you probably just missed that in the instructions or haven't unloaded a shotgun. (It's the little button next to the Nerf logo) So far no jamming on mine, but thanks for the heads up.
Basically the instructions say to pull the trigger, BUT it is recommended to point at floor. If still jammed, use reset button (the one you said) and it might shoot when pressed.
Yikes, I think the like to dislike ratio speaks for itself. Ik nerf has lost their way in recent years, but I'm pretty sure this particular product works fine
That is not true. I have an Elite 2.0 Eaglepoint that I bought it a few days ago. Not even a single jam or dart-chewing happened. Next time, choose a nerf gun wisely otherwise you'll say it's a waste of money.
@@bryan_posts dude, 1: this comment is 1 year old, 2: It will chew darts if it's mechanic, electric ones don't chew if they are new and 3: I don't use nerfs anymore, so I don't know about new ones.
Honestly, mine only jams and malfunctions with the gun were when I used it wrong. 2:14 when it gets locked forward and you can't clear jams, there's a small button on the side of the blaster, press it and you can pull the thing covering the flap back again to be able to access the flap. Then clear any jams out. The gun only jams when you use it wrong in my experience
if you read the instructions, you would know theres a button that unlocks the mechanism. maybe instead of forcing out the darts like an animal, try doing research.
I looks like you destroyed the darts manually, how does a blaster twist, then rip a dart to shreds? The gun does jam from time to time, but it never annihilates the darts to a point when they are not useable. And they are called stocks and barrel extensions, I feel like this is clickbait.
A lot of retaliator/recon type blasters do have this problem because the darts don't chamber right or all the way and the head gets chopped off by the bottom of the feeding barrel. Happens when you go fast or hard or both.
I think you got a dud, when I got mine I didn't know that you needed to half-way prime it to remove the magazine and I tore the magazine out, the blaster survived. Later on I primed it way too many times and no darts were firing, I unjammed it a bit and it survived. The blaster is actually really sturdy and has a lot of good designs, something might've gone wrong whilst yours was being made. Best you can do is try to get it refunded if nothing works.
Nah. Nothing wrong with it, when theres already a dart loaded that the magazine of its nerf cant fit, remove it and shoot it so the magazine can fit in and the prime kinda makes you sweaty but trust me, you better try doing this over and over again so it dosent jam. and it also can shoot harder so you buy it, worth it.
You got a lemon. I have this blaster but never had any of these problems happen to me. "If a dart is stuck in there you cant open the jam door" yes you can. There is a button on the side of the blaster that allows you to prime the blaster again if its jamed up.
If it’s jammed in the chamber not in the firing port it won’t let you pull the slide back. Cause the foam material holds it in place trapped between the top port and the slide. No other way to get it free than to remove the jammed projectile manually.
2:23 you see that little orange button on the other side where the screws are that an unjamming button I use this when my gun is jammed or crumpled darts when you press this it will release the priming handle to clear a jam
I bought the Echo and it works almost fine, it will jam occasionally but all I had to do is just take the dart out of where it was originally loaded, I do have some issues though. For starters The jam door is horrible, it is cheap which means you can rip it off but you can place it back in, it is hard to get to it if the priming handle won't work which is my biggest issue with the jam door, I do have a tip and it is to hold the tiny button on the left side of the echo and then prime it back as that cancels the priming and then you can easily just clear out the jam easily.
wait are you from Indonesia? because your name is kinda Indonesian, it's normal formag fed nerf blaster that has gray triggers to jam occasionally. this happens because grey trigger blasters shoots weaker that normal orange trigger blasters, and the weaker the blaster shoots the higher the chances of the blaster malfunctioning/jamming.
Well it's based on your opnion But it's not really trashy As coop mentioned in his review, it is a good blaster but with 2 cons. The best thing about this is the perfromance. 79FPS is kinda more hotter than the elite standard.
My first impression watching this video: (Disclaimer, no one is perfect and there will never be a perfect video, this is just what i thought of in my head and i do not by any means, want to offend Iron 0xide or anyone else) 0:25 i know that projectile is technically correct it just annoys me a bit because they are darts, BUT projectile is correct 0:32 can you ask nicely lol? 0:54 yay he said feed and not some incorrect word 1:20 you just hit the anti jam button, you don't have to take it apart 1:47 its a stock not a rear component 1:56 oh yay he called it a stock 2:40 twenty jams! that's a lot, but how many time have you fired the blaster? 2:49 HOLY CRAP THATS TOXIC, and its not garbage, also, do you think that a company with a 3.8 Million net worth needs to re-learn how to make nerf guns? didn't think so. (nerf is owned by Hasbro so look up Hasbro's net worth and see for yourself.) also, are you veteran?
@@doctorcomedian6128 yeah but they don’t use nails they use glue i ser he’s being a bit rough on the quality but it could be better and u Can access the first version of the gun easily
If hasbro is a garbage then why it will be so attractive to kids? Because the quality of the toys at hasbro is good and can you get a blaster that has good quality that is not a product from hasbro you are suck a jurk stupid you are a 垃圾 你妈妈没有教你什么叫对待玩具要好么 我干你娘咧 妈击败 去死啦 屌7 屌你啦 apa懒觉!!!!!!
@@tancheekit7276 im not talking about all nerf blasters. only about the elite 2.0,the new series sucks. the warden couldn't even work. and the mag release sucks as well. so do a little more research before ypu badmouth others
That is the main problem I have with that style of breach system. The dart is not pushed into the sealing part of the beech, instead the beech is pulled forward and the dart is pushed back into it. This leads to inconsistent chambering and the problem mentioned here. I also mod and usually remove the lock which prevents the priming slide from being pulled back when it is already forward after Priming. unless it can be depressed from the outside. Allowing me to clear jams.
i'm planning on buying this blaster on a website in my country and they're super super cheap. but after seeing this video, i still wanna buy it and i'm definitely going to because nobody ain't tellin me wha-do-do.
Hey man, I feel bad for because I feel the frustration. Btw you aren’t wrong with any pronouns or anything like that. Your chamber has a flat tube. If you look at a picture, (I’m looking at my brothers which works fine) the chamber is supposed to have a divot in the front to accept the dart, and not chew it up. Nerf messed your blaster, and it happens
I think you may be double feeding like I did, if the action gets stiff don't rack, eject the mag and look at the breach. This happens when you half rack and then full rack.
its not bad its kinda a waste of money since if it breaks its broken cant repair it so it goes straight to the trash bin besides i got a stryfe (maybe 2019) and i like it. it works perfectly,well it sitll jams but thats due to my darts being completely fucked up
I have mine over 7 months ago and it works just fine No Jams or darts geting chewed up and Slam fire work fine even with 6,10(incuded),12 and 25 Round mag works fine and even with Dart Zone(Buzz Bee) Darts Work Fine.
Ha ha. Really? That’s the excuse. These are supposed to be made for kids to play nerf wars with not leave on a shelf to look pretty. It’s not made of glass it’s made of plastic. I seriously don’t believe that was your comment. Lol.
using it roughly mate what do you mean by using it roughly. if it means yeeting the mag all over the place and sometimes the gun being dropped i have had a stryfe for a couple years dropped the mag multiple times onto the floor,didnt break. im just saying that the stryfe is a lot more durable than the elite 2.0 blasters
Based on what I'm seeing i know exactly what is going wrong, you're overloading the mag, 12 darts max and honestly as far as nerf mags go I usually go 1 less dart then the max load, because you have to much compression in the mag so it's loading 2 darts in the barrel causing those jams 👌👌
Their is also a plastic spring on the trigger so that will eventually break and the stock attach thing could come and you can't put it back on because it was glued on there
@@iron0xide974 the problem is they might have primed it too many times, mines had no problems at all, and with a lot of toys if you play too rough, it's probably gonna break.
Here’s what I’ve tried. Pull trigger. Get magazine out. And see if you can see a projectile stick in the mechanism. If so clear it out. Then it will work again. Also make sure you push the action all the way forward to get it to be able to pull the trigger.
Also there is a small primer release button. Small orange on the side. Only works if the darts/ projectiles are not locked between the body and the bolt which slides darts forward.
i got one for my birthday and it is amazing i like taking off the barrel extension and be stealthy with it becuz if u walked through a hall and u aiming down that hall and u hear stuff in the next room and they see the long barrel ur screwed and tell me ur style with the blaster
Try pressing the Anti jam button on the side and hopefully when you press the button to unlock/push out your magazine it’ll work (hopefully) if not keep pressing the anti jam button
Wtf, how did use jam like that, I bet you using this blaster like a hulk, and why most youtuber always have problem with echo when I used it 2 weeks and it is still fine,HUH?!
![[REVIEW] Nerf Elite 2.0 Warden DB-8 | TOTAL GARBAGE!](http://i.ytimg.com/vi/FHcGuvg0Q8Y/mqdefault.jpg)
![[REVIEW] Nerf Elite 2.0 Warden DB-8 | TOTAL GARBAGE!](/img/tr.png)
![[REVIEW] Nerf Elite 2.0 Echo CS-10 | The New Retaliator](http://i.ytimg.com/vi/D_HM4Iiarzc/mqdefault.jpg)
Bruh I just bought this blaster and I'm happy with it
Same but I'm trying to take it apart to upgrade the spring
@@itssean4337 i can't get the back off
Same
same
Same
I got this blaster and it's amazing even has slam fire!
I jusr got it
@@xterminator3663 awesome! Have fun, it's a wonderful blaster!! :)
@@ytchannelclips1944 Epic gun it’s my favourite with my ultra 3
@@ComradePoop yea it's my favorite to along with my scravenger
@@ytchannelclips1944 My sidearm for it came (commander yes I got it form Amazon and the echo form Target)
I have a few objections
1. Darts don’t get chewed up like that
2. Even if it did go forward the dart still wouldn’t get chewed
3. I have watched a couple videos on this gun so I know that this is probably a 1/100 chance of happening A TIME
4. How were you using it cause even slam fire doesn’t do this
This ^
"Darts don't get chewed up like that"
uh, did you watch the entire video? he literally showed the jammed dart and pulling out that dart will cause darts to get chewed up. you cant even take apart the blaster, let alone expect the dart to come out in perfect shape.
@@bananers9174how do you know he didn’t chew up the darts himself and use crummy darts for the jamming?
@@CapAmerica10 you have a point with the bad darts, but why would you do that intentionally? i bought a thrifted nerf tristrike and i had the same problem, except with that I COULD OPEN THE BLASTER
@@bananers9174 I’m not sure, people on the internet would do crazy things. Also if it was thrifted and you could open it, the original owner must Harv tried to modify it but ended up failing which is probably why you had the problem.
I ordered it yesterday and today it arrived and i can honestly say its one of my favorite Nerf Blasters from the Elite 2.0 Series
Agreed!
There is a slide release on the left face of the gun which allows you to re-rack it before firing, but you probably just missed that in the instructions or haven't unloaded a shotgun.
(It's the little button next to the Nerf logo)
So far no jamming on mine, but thanks for the heads up.
Basically the instructions say to pull the trigger, BUT it is recommended to point at floor. If still jammed, use reset button (the one you said) and it might shoot when pressed.
I don’t even use the instructions😂
Yikes, I think the like to dislike ratio speaks for itself. Ik nerf has lost their way in recent years, but I'm pretty sure this particular product works fine
Every nerf jams and chews bullets.
That is not true. I have an Elite 2.0 Eaglepoint that I bought it a few days ago. Not even a single jam or dart-chewing happened. Next time, choose a nerf gun wisely otherwise you'll say it's a waste of money.
@@bryan_posts dude, 1: this comment is 1 year old, 2: It will chew darts if it's mechanic, electric ones don't chew if they are new and 3: I don't use nerfs anymore, so I don't know about new ones.
Just buy a retaliator, cheaper, better, fixable.
Did u shove more than 10 darts in the mag? Thats probably the only reason i can think of from experience
No, it was like four or five. Sometimes three.
Maybe its a limin
Well, if you're having those issues, you probably have a lemon. I have one of these and it works perfectly fine.
Honestly, mine only jams and malfunctions with the gun were when I used it wrong. 2:14 when it gets locked forward and you can't clear jams, there's a small button on the side of the blaster, press it and you can pull the thing covering the flap back again to be able to access the flap. Then clear any jams out. The gun only jams when you use it wrong in my experience
I've had the same issue as iron 0xide and I tried the button you're talking about and it didn't do shit.
@@Mediocre_at_best I got this problem once, it's hard it fix and the jam button doesn't help, but it's a fixable jam
Mine gets locked at the back and I don't know how to fix it
@@a.l.d.a.16 me either, it's just a jam though, cause I've seen it been fixed
if you read the instructions, you would know theres a button that unlocks the mechanism. maybe instead of forcing out the darts like an animal, try doing research.
If you would have read the comments that gets jammed to where that didn’t work.
theres a un jam button
I looks like you destroyed the darts manually, how does a blaster twist, then rip a dart to shreds? The gun does jam from time to time, but it never annihilates the darts to a point when they are not useable. And they are called stocks and barrel extensions, I feel like this is clickbait.
Your putting the mag in the wring way?
The slide is racked back and stuck (jammed), and the mag release doesn’t work, any help?
You clearly mangled the dart. How the F does a blaster jam TWIST a dart and pull it apart. Mine works fine
And there called DARTS
sorry to break it to you but if you shoot a bullet thats a projectile
if you shoot a nerf dart
its also a projectile
@@Damian-cilr2 but it's referred to as darts
Same how da heck did he mangle the darts that bad
Every time my echo jams it just slightly crumples it up
A lot of retaliator/recon type blasters do have this problem because the darts don't chamber right or all the way and the head gets chopped off by the bottom of the feeding barrel. Happens when you go fast or hard or both.
I think you got a dud, when I got mine I didn't know that you needed to half-way prime it to remove the magazine and I tore the magazine out, the blaster survived. Later on I primed it way too many times and no darts were firing, I unjammed it a bit and it survived. The blaster is actually really sturdy and has a lot of good designs, something might've gone wrong whilst yours was being made. Best you can do is try to get it refunded if nothing works.
I showed my dad the blaster and he also forgot to halfway prime it
@@moopandmop4597 good to know I'm not the only one who did that
i also did the same
Nah. Nothing wrong with it, when theres already a dart loaded that the magazine of its nerf cant fit, remove it and shoot it so the magazine can fit in
and the prime kinda makes you sweaty but trust me, you better try doing this over and over again so it dosent jam.
and it also can shoot harder so you buy it, worth it.
@@voidymakescontent4003 yeah
You got a lemon. I have this blaster but never had any of these problems happen to me. "If a dart is stuck in there you cant open the jam door" yes you can. There is a button on the side of the blaster that allows you to prime the blaster again if its jamed up.
If it’s jammed in the chamber not in the firing port it won’t let you pull the slide back. Cause the foam material holds it in place trapped between the top port and the slide. No other way to get it free than to remove the jammed projectile manually.
I don't think he'll know that because he is a massive boomer
@@whets76 the little slide release doesn’t do it. If you read my comment you would understand what the problem is. It’s bad design.
@@whets76 damn
@@iron0xide974 not all of them are like that, mines works perfectly fine, I do think you got a lemon.
2:23 you see that little orange button on the other side where the screws are that an unjamming button I use this when my gun is jammed or crumpled darts when you press this it will release the priming handle to clear a jam
Yea it don’t work for the issue. It was defective. Says nerf.
I bought the Echo and it works almost fine, it will jam occasionally but all I had to do is just take the dart out of where it was originally loaded, I do have some issues though. For starters The jam door is horrible, it is cheap which means you can rip it off but you can place it back in, it is hard to get to it if the priming handle won't work which is my biggest issue with the jam door, I do have a tip and it is to hold the tiny button on the left side of the echo and then prime it back as that cancels the priming and then you can easily just clear out the jam easily.
Yea same mine works good and its fun and reliable it does rarely jam though
If you live in phillipines nerf echo sucks if you have it for 4 days it will lose 30% its accuracy
wait are you from Indonesia? because your name is kinda Indonesian, it's normal formag fed nerf blaster that has gray triggers to jam occasionally. this happens because grey trigger blasters shoots weaker that normal orange trigger blasters, and the weaker the blaster shoots the higher the chances of the blaster malfunctioning/jamming.
Agree
Uh it's not the toy that has a problem but a mechanism if the blaster eats your nerve ball it must be that
Well it's based on your opnion
But it's not really trashy
As coop mentioned in his review, it is a good blaster but with 2 cons.
The best thing about this is the perfromance. 79FPS is kinda more hotter than the elite standard.
Yes when it fired it’s got some power for a nerf cannon. It’s the jamming issue that Nerf needs to address in a second release.
@@iron0xide974 maybe you weren't operating it smoothly...
@@coolperson8594 it’s for my 7 year hold who has nerf wars. It jams up when used normally.
elite 2.0 is absolute garbage. the echo is garbage
@@iron0xide974 there is a nerf dart in the corner right in the jam door
and use a magazine
My first impression watching this video: (Disclaimer, no one is perfect and there will never be a perfect video, this is just what i thought of in my head and i do not by any means, want to offend Iron 0xide or anyone else)
0:25 i know that projectile is technically correct it just annoys me a bit because they are darts, BUT projectile is correct
0:32 can you ask nicely lol?
0:54 yay he said feed and not some incorrect word
1:20 you just hit the anti jam button, you don't have to take it apart
1:47 its a stock not a rear component
1:56 oh yay he called it a stock
2:40 twenty jams! that's a lot, but how many time have you fired the blaster?
2:49 HOLY CRAP THATS TOXIC, and its not garbage, also, do you think that a company with a 3.8 Million net worth needs to re-learn how to make nerf guns? didn't think so. (nerf is owned by Hasbro so look up Hasbro's net worth and see for yourself.)
also, are you veteran?
Whats haribo? Isnt haribo that gummy brand lol do you mean hasbro cus nerf is owned by hasbro
@@wangraymond6626 Lol your right. I'm stupid.
@@doctorcomedian6128 what about the nerf warden those always breaked
@@tripIepen The warden is a exception, the design is just crappy.
@@doctorcomedian6128 yeah but they don’t use nails they use glue i ser he’s being a bit rough on the quality but it could be better and u Can access the first version of the gun easily
How do you guys fix the part on top that won’t go back?
There's a smol button on the left side press it
@@thenerd7392 yea
Omg, I bought this yesterday and it's already broken. I can't fire it, the trigger is stuck, does anyone have any tips on how to fix that?
Mine did the same thing and I didnt even use it roughly...
Man.. thanks for the advise!
Why this blaster is so expensive on my country Brazil?
Bruh you got a lemon
Bro it works insanely well have u ever used a nerf blaster before
My son has lots of nerf blasters. It works good until it jams. Then I have to work at getting projectiles out. It’s garbage.
Well I have 2 of these guns have never had any problems and they are called darts not projectiles
@@deadsavage2732 he could've gotten a lemon.
but the elite 2.0 is garbage just a money grab for hasbro.
and you cant even fix it cause they glued it
If hasbro is a garbage then why it will be so attractive to kids? Because the quality of the toys at hasbro is good and can you get a blaster that has good quality that is not a product from hasbro you are suck a jurk stupid you are a 垃圾 你妈妈没有教你什么叫对待玩具要好么 我干你娘咧 妈击败 去死啦 屌7 屌你啦 apa懒觉!!!!!!
@@tancheekit7276 im not talking about all nerf blasters. only about the elite 2.0,the new series sucks. the warden couldn't even work. and the mag release sucks as well. so do a little more research before ypu badmouth others
That is the main problem I have with that style of breach system. The dart is not pushed into the sealing part of the beech, instead the beech is pulled forward and the dart is pushed back into it. This leads to inconsistent chambering and the problem mentioned here. I also mod and usually remove the lock which prevents the priming slide from being pulled back when it is already forward after Priming. unless it can be depressed from the outside. Allowing me to clear jams.
i'm planning on buying this blaster on a website in my country and they're super super cheap. but after seeing this video, i still wanna buy it and i'm definitely going to because nobody ain't tellin me wha-do-do.
Hey man, I feel bad for because I feel the frustration. Btw you aren’t wrong with any pronouns or anything like that. Your chamber has a flat tube. If you look at a picture, (I’m looking at my brothers which works fine) the chamber is supposed to have a divot in the front to accept the dart, and not chew it up. Nerf messed your blaster, and it happens
Yeah, his chamber was a defect.
A nerf gun couldn’t rip darts like that. you ripped it yourself
I think you may be double feeding like I did, if the action gets stiff don't rack, eject the mag and look at the breach. This happens when you half rack and then full rack.
i have the nerf echo 2.0 and its not a waste of money i got it on christmas and its the best toy so thats a fake fact
Its big true
I agree it’s cool not bad
its not bad
its kinda a waste of money since if it breaks its broken cant repair it so it goes straight to the trash bin
besides i got a stryfe (maybe 2019) and i like it. it works perfectly,well it sitll jams but thats due to my darts being completely fucked up
@@Damian-cilr2 thank you also im from friday night funkin
@@mommymearest4261 Yea echo best
thats a problem whit all of nerf springer that use mags. they get cut off from that. even my recon (a 14-15 year old blaster) chews darts like that
In the Nerf manual it says how to get up a stuck bullet, bruh you ate the bullet
I have mine over 7 months ago and it works just fine No Jams or darts geting chewed up and Slam fire work fine even with 6,10(incuded),12 and 25 Round mag works fine and even with Dart Zone(Buzz Bee) Darts Work Fine.
I thank you not to insult Iron 0xide
Mine works buttery smooth and it never jams if i use almost warn out darts
my """"10""""" round echo magazine only holds 7 darts someone knows if it can be fixed?
Are they turned the right way
@@zooted37 they are
Yo did your dog chew that up
Nah I already have the echo and I'm enjoying it. Actually one of the best elite 2.0 blasters.
ouais aussi le echo est le meilleur est iron 0xide est un menteur
Exactly why does every body hate it
This blaster isn’t really garbage, I’d recommend getting mint condition Adventure Force waffle head darts to go along with the echo.
Yes its really good
Yes i There is also always broken I feel angry too sometimes but I appreciate the reason my mom and dad bought it
Hello, could I open the nerf please, I need to see the order of the nerf
bruh the reason it jams is because some people can have trouble using it if they are using it roughly or is new to nerf. I bought it and i LOVE it
Ha ha. Really? That’s the excuse. These are supposed to be made for kids to play nerf wars with not leave on a shelf to look pretty. It’s not made of glass it’s made of plastic. I seriously don’t believe that was your comment. Lol.
ok now your just being rude and i know their not made of glass and i actually like the blaster! oh and also im a freaking kid!
Oh also no u
@@iron0xide974 no shit Sherlock any more detective cases you cracked open today
using it roughly
mate what do you mean by using it roughly. if it means yeeting the mag all over the place and sometimes the gun being dropped i have had a stryfe for a couple years dropped the mag multiple times onto the floor,didnt break.
im just saying that the stryfe is a lot more durable than the elite 2.0 blasters
0:22 where is the revving trigger?
Echo doesn't have one...
Yeah i have one it dont have one lol
Oh sorry I mistook it for the phoenix
@@ajsonshehaj8823 thats ok
@@ajsonshehaj8823 just took a look and wow they look similar
"Waste of money" when you're also bought one
Based on what I'm seeing i know exactly what is going wrong, you're overloading the mag, 12 darts max and honestly as far as nerf mags go I usually go 1 less dart then the max load, because you have to much compression in the mag so it's loading 2 darts in the barrel causing those jams 👌👌
Are you sure that you`re putting the darts the correct way? Because if you dont you break the darts
you earned a sub and now i know never to buy that
I have this blaster and i love it
why
Their is also a plastic spring on the trigger so that will eventually break and the stock attach thing could come and you can't put it back on because it was glued on there
YOU GOT A LEMON
Have you ever thought about the fact that maybe you got the 1 in 40 billion of them that doesn’t work???
i know i'm 2 years late but what i think happened here is simply a manufacturing error from nerf
this is the 2nd level of nerf elite 2.0 Warden
componets/stock and barrel
The only thing not working here is your brain. How about you press the unjam button and watch coop772's video
Wait a minute you forgot the unjamming button you forgot the instructions
U got a lemon the magazine release js crappy but from what i have seen there shouldnt be that much jamming
use fresh darts with no bends or scratches and make sure your priming the blaster properly also fixing jams with this blaster is very simple
You must have a lemon, right?
2:32 there is a dart inside your gun, that is probably the issue
Bro it only does that once. I got it jammed twice and 1 was goo and the other got chewed up
On this one it happened all the time. Nerf said there was a defect.
I bought it and its definetly the best purchase ever among with the phoenix
Kinda weird,i own one and it never jammed or caused any problems.
but it will commit suicide from the plastic spring
Bro could use the unjamming button at the back its his error
My son plays the nerds about 7 years an d it will be jam if you play it roughly
Yes and my son is 7 and all 7 year olds in a nerf war will do that. The others we have don’t jam up like this one.
@@iron0xide974 the problem is they might have primed it too many times, mines had no problems at all, and with a lot of toys if you play too rough, it's probably gonna break.
2:10 there’s litterally a button to clear that lock
When it’s good and jammed it don’t work. And the fact they put a button was because they recognize it was a bad design instead of fixing it.
@@iron0xide974 well it works for me
@@iron0xide974 also it doesn’t twist darts like that it shoots well
Nabib you can get into the door with the unjamming button.
Alguien que me diga cómo desbloquearla por favor, por que se me ha bloqueado hacia adelante y no puedo hacer nada
nothing is wrong with mine but I took off the barrel top and slid the slide on top of it and now it’s stuck and I can’t get it unstuck
Here’s what I’ve tried. Pull trigger. Get magazine out. And see if you can see a projectile stick in the mechanism. If so clear it out. Then it will work again. Also make sure you push the action all the way forward to get it to be able to pull the trigger.
Also there is a small primer release button. Small orange on the side. Only works if the darts/ projectiles are not locked between the body and the bolt which slides darts forward.
I got this gun and I am very happy with it it works very well
Dude there is a jam button on the left side
I’ve had this blaster for around two years and it hasn’t destroyed any of my darts. Don’t trust this guy
the same shit. and unfortunately iFixit doesn't have instruction how to remove the back piece which hold probably the main string inside :(((
I bought that very blaster yesterday and it’s frickin awesome
Same lmao, i was looking for modification kits and found this video
@@khaggiiskhns ye
i got one for my birthday and it is amazing i like taking off the barrel extension and be stealthy with it becuz if u walked through a hall and u aiming down that hall and u hear stuff in the next room and they see the long barrel ur screwed and tell me ur style with the blaster
fax I bough it and 1 day later the bullet jammed in the back of the gun and I couldnt get it out
How does that even happen
@@SarnaiViola you know where the barrel is when you shoot the gun i shot it and then it got stuck
@@cruuk3130 you can take the barrel off
@@SarnaiViola are you dumb?
@@SarnaiViola no so in the gun there's this orange barrel and you shoot the bullet out of it
It’s so hard to push the magazine out, anyone have suggestions on how it works?
Try pressing the Anti jam button on the side and hopefully when you press the button to unlock/push out your magazine it’ll work (hopefully) if not keep pressing the anti jam button
Bro prob ripped up the darts
Bro i luv this blaster it works well whay its supposed to do
Nobody gonna fucking talk about the warden
Porque no la cuidas por eso está mal funcionando
Wtf, how did use jam like that, I bet you using this blaster like a hulk, and why most youtuber always have problem with echo when I used it 2 weeks and it is still fine,HUH?!
I have no grudges with this blaster. Mine never jammed or malfunctioned.
i got mine yesterday and it was perfectly fine
my mediator did that too,you need to PERFECTLY and its fine
I had sone trouble with this gun initialy, but now that I figured out the problem I love it
it will stuck easily when you reload
Im bought this gun and It's working perfect :)
my friend got this and it actually worked :O
Use the blue elite blue hard heads they are the best type and the nerf gun is really good
It’s amazing I bought it yesterday
Hope you enjoy it
I have the echo but I’m still very happy
I don't care what other people this of this gun I love it and it will always be my favourite