I really liked the production videos you shared, and I enjoyed them immensely. Also, is it enough to spray two coats of clear paint? Will regrinding penetrate it? thanks
Loved it so far, your dedication to this model was incredible, my hat off to you. One single thing is leaving me a little uncertain, I noticed that you didn't paint the interior of the side cowl and of the cowl, at the end of this video and this thing looks strange to me. I mean, this is a bike model not a car one, so in case you need to show the interior ( which is Awesome with all the modifications you did) doesn't it leave you feeling like you've done a half job? Did you leave it on purpose? I beg your pardon for what seem a negative critique, but seeing how much you cared for the rest ( adding parts that will never be seen is a sign of how much you love this hobby and this model) I was puzzled by that. Anyway I will try to replicate this incredible level of art ( I already bought the model, but now I want to detail it as much as possible as you did), thank you so much for this incredible work, the model looks like the real bike, it's Awesome, and you're a Great modeller and painter.
TS-13 is a lacquer-based clear paint. Decals are sensitive to solvents, so if you suddenly spray the paint normally, it will dissolve. Therefore, many people use an airbrush to spray clear paint. At first, spray the airbrush from a distance and spray the clear paint while removing the solvent component. By doing this, we will create a clear layer to protect the decal from the solvent. After that, apply the clear paint in several times. I use urethane clear, but the procedure is almost the same.
@@flymanhm thanks once again for getting back to me, could you let me know what make of paints and clear coat you used so I can get a good idea of compatibility. Thank you
Nice work
MEGA Cool
やっと!待ちに待った最終回
と思ったら次回に持ち越し…ww
いつも通りの丁寧さです
神がかってます!
すいませぬ。
編集してみたら、尺が長くなってしまったので、この次が最終回になります…
期待させて申し訳ないです。
flymanhm いえいえ
これは次回に期待しろと言わんばかりに
丁度いい所で切りましたね
Those panels really came out great! Amazing job! Well done!👍🏼
Beautiful work. 😉👍❤
職人技!!👍
Thank you!!
最高です。
僕には無理ですが、本気で物を作るというのはこういう事ですね。
妥協無し
いつもありがとうございます^^
ありがとうございます!
少しでも良いものを作れるように努力しています。
これからもよろしくです。
Nice work as always. Good job!
Thank you!!
Very nice 👍
marvelous
I really liked the production videos you shared, and I enjoyed them immensely. Also, is it enough to spray two coats of clear paint? Will regrinding penetrate it? thanks
Thanks for your comment!
It is not clear how many times the clear will be painted.
I try to apply it quite thickly in preparation for regrinding.
@@flymanhm Thank you very much for your reply.
Love the finish of 2k lacquer...always been afraid to put it through my airbrush though. Great video, what’s the next project?
Thank you.
Next is the TAMIYA 1/12 HONDA VFR750R.
できたら普段使ってるディテールアップパーツの紹介してほしいです。
ディテールアップパーツセットはキットで別々なので電気系統の配線に使ってるチューブ?など…
そうしたいのはやまやまなんですが、忙しくて…
amazonなどにいろいろ売ってるので、ぜひ探してみてください。
top studioやモデルファクトリーヒロ、アドラーズネスト、などのメーカーのパーツをよく使ってます。
all that pain-staking work, then you suddenly sneeze.
初めまして。
バイクプラモや実車の走行動画、とても楽しく拝見させていただいております。
特にプラモはすごいですね。道路に置いて撮影したら本物にしか見えないんじゃないですか。
海外の動画でずっとしゃべりながら作ってるのがあるけど、うるさいんですよね。
flymanhmさんのはBGMと字幕で見やすいです。
チャンネル登録させてもらいます。
これからも楽しみにしています。
どうも始めまして。
動画のご視聴、ありがとうございます。
チャンネル登録もありがとうございます。
自分は、しゃべるのが苦手なので、こういうスタイルの動画にしています。
あと、海外の視聴者も多いので、日本語でしゃべるよりも、英語字幕を付けるようにしてますね。
これからもよろしくお願いします。
Good
Loved it so far, your dedication to this model was incredible, my hat off to you.
One single thing is leaving me a little uncertain, I noticed that you didn't paint the interior of the side cowl and of the cowl, at the end of this video and this thing looks strange to me.
I mean, this is a bike model not a car one, so in case you need to show the interior ( which is Awesome with all the modifications you did) doesn't it leave you feeling like you've done a half job?
Did you leave it on purpose?
I beg your pardon for what seem a negative critique, but seeing how much you cared for the rest ( adding parts that will never be seen is a sign of how much you love this hobby and this model) I was puzzled by that.
Anyway I will try to replicate this incredible level of art ( I already bought the model, but now I want to detail it as much as possible as you did), thank you so much for this incredible work, the model looks like the real bike, it's Awesome, and you're a Great modeller and painter.
Thanks for your comment!
As you pointed out, I forgot to paint the inside of the cowl ...
Be careful in the future.
What clear coat did you use because I used TS-13 and it disintegrated the decals, I’ve only used Tamiya acrylic undercoat and paint 👍👍
TS-13 is a lacquer-based clear paint.
Decals are sensitive to solvents, so if you suddenly spray the paint normally, it will dissolve.
Therefore, many people use an airbrush to spray clear paint.
At first, spray the airbrush from a distance and spray the clear paint while removing the solvent component.
By doing this, we will create a clear layer to protect the decal from the solvent.
After that, apply the clear paint in several times.
I use urethane clear, but the procedure is almost the same.
@@flymanhm thanks once again for getting back to me, could you let me know what make of paints and clear coat you used so I can get a good idea of compatibility. Thank you
赤の部分だけデカールではなく塗装したのはなぜですか?
良い質問ですね。
デカールの赤色と塗装した赤色とで、色の違いが出てしまうのが嫌だったのと、
塗装部分とデカールとの境い目に、段差が出来てしまうのを避けたい、という2つの理由からです。
@@flymanhm
なるほど!さすがですね!完成動画楽しみにしてます!
クリアーは、何回くらい重ね塗りしてますか?
ウレタンクリアー前は、デカールの厚み分くらいにラッカークリアを塗り、軽く磨いてから、ウレタンクリアーを3回~4回くらい重ね塗りしていると思います。
いつも、回数とか気にせずに適当に塗ってきましたので、うろ覚えです(汗)
返信ありがとうございます。
参考にさせていただきます🎵
大切な作品だと思いますが、自分ではこんなレベルに仕上げることはできないので譲って頂くことはできますか?
これまでも同様の申し出が何度かありましたが、丁重に断ってきました。
というのも、今回のモデルの製作には、かなりの費用と時間がかかっていますし、ゆえに妥当な値段が付けられません。
あと、配送中の破損の危険もあるのですが、壊れない梱包の仕方がわかりません。
ただ、ディスプレイケースが手狭になってきたので、どうしても欲しいという方には譲ってもいいかなって感じています。
もしも売却するとしたら、ヤフオクなどのオークションサイトへの出品という形になると思います。
その場合は、私のチャンネルのコニュニティタブ(スマホ版UA-camアプリのみ確認可能)にてお知らせするつもりです。
よろしくお願いします。
미쳤다 진짜