Mind blowing custom ❤❤ I have maxidot l&k cluster,steering gateway modules auto wiper assembly, auto IRVM, auto climate, complete stereo, complete OEM.
Thank you for finally posting G. Loved the content, i’m not even nearly inclined towards using tools let alone using tools on my car but your tutorials make it so easy and assuring. saving me lots of bucks for further mods. love you
Doesn't the these skodas old gen four spoke steering looks like cheap copy of audis four spoke steering wheel I know vag but 15/30 lakhs vs 40/60lakhs you don't want that But now as a retrofitter not a bad idea to not to think about it
Hola es compatible con un Škoda Fabia A05 Sport 2011…? El radio es un Swing Me gusto❤ como quedó …! Cuando actualizas el radio …? Saludos desde Quito-Ecuador 🇪🇨
I have a 2014 Jetta Comfortline. How am I supposed to add CC to my car? Shall I just change the stalks and code it using VCDS considering my current clock spring already supports steering mounted controls? Or is something else needed in addition to all of this? Thanks. Loved your video!
Hey, check the link in my description, correspond it to your clock spring’s part number, your clock springs should support mfsw and ccs both together, only then should you change the stalk. Rest the process will be same as I showed in this video
hello, my 2013 polo 6r vehicle is factory-installed, the front fog lamps do not light up when turning right and left, it was hidden especially with / vcds / but it did not work, it only lights up when a signal is given in that direction, but do you have any information, thanks
@@PrerakKataria Hi, what do you mean by automatic polo? I heard that there is a hidden bit in my car's bcm brain with 87p vcds in the central electiric adaptation channel, but I didn't mess with it because I don't know how to solve it.
Bro I have one question, I see people installing steering with Cruise Control does this only required to enable Cruise Control or Any big part to be install with transmission or something?
Very descriptive..neat work..i have a questions.. if i dont wish to have a combination switch with cruise control and also not to change the clock spring , does the MFSW controls work with just a harness change on airbag? Provided I have a MFSW procured
Hello, make sure you have the correct clock spring, I faced this issue once while installing and it turned out that the CCS Butron on stalk had some gunk under it, after a couple of hard pushes gunk cleared up and it started working. If this doesn’t work, open adv meas values in VCDS and look for the ccs buttons which are set, Res, cancel/off switch and check if the BCM is taking inputs there.
@@PrerakKataria Thankyou so much for the reply! The cruise control is working, all the buttons are working, green cruise control light also shows upon the instrument cluster, the only thing is the speed that i have to set doesn't show up on the MFD
Mind blowing custom ❤❤ I have maxidot l&k cluster,steering gateway modules auto wiper assembly, auto IRVM, auto climate, complete stereo, complete OEM.
Thank you for finally posting G. Loved the content, i’m not even nearly inclined towards using tools let alone using tools on my car but your tutorials make it so easy and assuring. saving me lots of bucks for further mods. love you
Happy to help, a lot more of such videos to come!
We need more UA-camrs like you rather than phone reviewers on every f’ng corner of the streets!
🙏🏻😁
@@PrerakKataria can. You make a video for the air bag connection with
Doesn't the these skodas old gen four spoke steering looks like cheap copy of audis four spoke steering wheel I know vag but 15/30 lakhs vs 40/60lakhs you don't want that
But now as a retrofitter not a bad idea to not to think about it
Even the 2016 a6 had a cheap looking 4 spoke steering wheel but a rs steering can be retrofitted easily in it
@@atharva0777 can't afford rs6 but rs6 steering wheel no can't afford that too 😔
@@lakshya7873 i saw one on a uk based website the carbon fibre rs steering wheel is for 900 pounds
Great Work Sir. Love your Content
Try to source interior carbon fibre trims or dip the trims... one of friend did it looks good 👍🏻
Can't wait for Quattro now
Might add a layer of Forge CF on it myself and make a UA-cam video on it, let’s see ! 🙏🏻
@@PrerakKataria big ups to you..never seen someone working on forge carbon all by himself
🙏🏻😁
Bro i would suggest u to get a new skoda stearing wheel
Hello brother,i want right side paddle shifter of superb,mine superb has been broken so want to change,so can you source me ?
Good job bhai....
Hola es compatible con un Škoda Fabia A05 Sport 2011…? El radio es un Swing
Me gusto❤ como quedó …!
Cuando actualizas el radio …?
Saludos desde Quito-Ecuador 🇪🇨
Hey, checkout my page @project.4771 on Instagram where I have updated the radio
Do you have a replace clock spring? I need it for my skoda laura
The down black worn out part of steering can be fixed may by sand paper and paint , may be .
Will fix it with forged cf or add leather wrap over it as well when I get the wheel re done
When is the dsg hitting in the Laura
I have a 2014 Jetta Comfortline. How am I supposed to add CC to my car? Shall I just change the stalks and code it using VCDS considering my current clock spring already supports steering mounted controls? Or is something else needed in addition to all of this?
Thanks. Loved your video!
Hey, check the link in my description, correspond it to your clock spring’s part number, your clock springs should support mfsw and ccs both together, only then should you change the stalk. Rest the process will be same as I showed in this video
Great work buddy..one question, whr can we get the clock spring to use steering controls.
Scrapyards are your best friend when working on these old cars, but even I can source them for you @that.red.sells Instagram
What is your camera and which editing software do you use?
iPhone 13 Pro, Premiere Pro For editing
Nice!
But your videos look like it's shot from a movie camera
Could you please describe how can i convert my 2011 polo 1.6 highline steering wheel to a mounted control steering wheel?
You’ll need updated bcm, combination switch, steering and airbag and a lot of wiring, someone experienced will be able to do only
@@PrerakKataria can you help in this i can pay.
hello, my 2013 polo 6r vehicle is factory-installed, the front fog lamps do not light up when turning right and left, it was hidden especially with / vcds / but it did not work, it only lights up when a signal is given in that direction, but do you have any information, thanks
Only in automatic variants of Polo can you activate cornering lamps with steering, otherwise they’ll only work with indicators
@@PrerakKataria Hi, what do you mean by automatic polo? I heard that there is a hidden bit in my car's bcm brain with 87p vcds in the central electiric adaptation channel, but I didn't mess with it because I don't know how to solve it.
Automatic transmission polos
@@PrerakKataria but here on youtube i saw it working very manual polo *?????
Can we retrofit the cruise control on Polo 1.2 mpi?
Just by replacing the stalks and a bit of coding? Or is it something to do with the bcm as well?
You’ll need a new BCM and a wiring harness which goes to the ECU and BCM
Pl show more vedios
HI Bro, can you post a video of changing your music control system
I have uploaded it in short form content
bro can you upgrade my laura 4881 like your 4771
@@PrerakKataria
Bro I have one question, I see people installing steering with Cruise Control does this only required to enable Cruise Control or Any big part to be install with transmission or something?
Nothing needs to be changed with transmission, just installing these parts and coding
Have you finished your coading
Let me know if you did I tried but not working in vcds
Very descriptive..neat work..i have a questions..
if i dont wish to have a combination switch with cruise control and also not to change the clock spring , does the MFSW controls work with just a harness change on airbag?
Provided I have a MFSW procured
It won’t work unless you update the clock spring, clock spring allows the car to have extra inputs
@@PrerakKataria thank you
Hi bro. Does laura type 1 lnk MFSW steering work for type 2?
why MFW underlined in cover fotu ?
How much it cost will it be successful open air bag when it meet with accident
Airbags can be sourced for really cheap from a scrapyard
Can anyone explain me why cruise control is required in highways? Isn't it better to modulate the acc on foot?
Leave ccs on longer stretches and give your feet some rest, why not
Bro do a detailed video wen you're gonna install the haldex
Definitely
@@PrerakKataria love how the car is coming together 💯👏
Is BCM same on Laura Ambiente, Elegance and laurin and klement?.. Can you please share part number of BCM and pinouts
Bcm is different from those variants, higher models get 87 BCM while the lower models with no fog lamps get 84 BCM
@@PrerakKataria My laura ambition has fog lamps also i have activated cornering lights and DRL from OBDeleven... Which BCM do I have 87 or 84?
87
@@PrerakKataria can you please provide pinout for 87 bcm of Laura?
Dm me on Instagram @that.prerak.kataria
Where to buy a vcds cable, which works
Can you install the modern radio from rapido 2020 In it ?
Hello bro I need to upgrade my steering too please can you send the link of the steering wheel
Soo can we also installed RCD330 or 340G on this and use carplay ?
Yes but audio quality will drop greatly
you mean we need to upgrade whole audio system right ? @@PrerakKataria
Hello bro
I have vw jetta 2013 model. I want to install cruise control. Is it possible?
Bro i am unable to reach you out i contacted you on Instagram but you haven’t responded i want to get cruise control done on my vw help me to reach
Bro , i activated the CCS display but it doesn't showup, can you help?
Hello, make sure you have the correct clock spring, I faced this issue once while installing and it turned out that the CCS Butron on stalk had some gunk under it, after a couple of hard pushes gunk cleared up and it started working. If this doesn’t work, open adv meas values in VCDS and look for the ccs buttons which are set, Res, cancel/off switch and check if the BCM is taking inputs there.
@@PrerakKataria Thankyou so much for the reply!
The cruise control is working, all the buttons are working, green cruise control light also shows upon the instrument cluster, the only thing is the speed that i have to set doesn't show up on the MFD
Bro cruise control is for vento highline 2013 is compatible ??
Can do the same in fabia??
Yes, process is a little different but steering can be added
Cruise control for 2014 Polo 1.2 MPI, is it possible
Hi , Kindly advice which clock ring part number will be compatible for my Skoda Laura Elegance 2012. Retrofit Skoda superb wheels
The exact one I used
I found a refurbished one part ending with C which is midline . Any highline I can go ??
Get one which ends with B
Grt help thank u
I ordered ending with E and it's highline and all are YES
Bro change the cluster and also do the coding because I'm also upgrading mfsw for my Laura. Please
Clsuter happening soon
Bro do it soon. Waiting for video
@@PrerakKataria bro havent not uploaded next part yet. Please make it.
While upgrading to mfsw with cruise control. Is it required to upgrade the steering module as well?
Yes
What was the price of airbag bro
How can I code the cruise control
Can you please help in detail or can you make a video, how to code the cruise control
You need to code it as much as I showed in the video, nothing more needs to be done
Its no way DIY.
wat VCDS you use and where to get one.
Bro this is my 5 comment on your video please help me with cruise control in rapid.. where can i get that console.. i need that .. please
I want to be your brother
And
@Cool Bro! Polo and Laura Bombastic 😉😉