A lot more glue and tape than this video shows. The chip doesn't come out that easily just in case people doing it for the first time think something is wrong. Just cut the black glue on the seam and the one bit of tape on the black and red braided wire
Agreed...I just finished doing this . The 4 outside screws were tough to get out . It seemed like more than dirt was clogging up the grooves, so it was hard to get a grip to unscrew them . I used my dremel to cut a slot & I was able to screw them back in using a slotted. There is sealant/glue around the inside of usb connection (the shiny stuff you see in the video) . That will have to cut in order to get it out There is also sealant around some wiring that needs to be cut in order to pull the board out to access the battery . After the battery is in remember to push the usb port into the housing and then put the board down . It doesn't just sit right in. My battery was glued in, so expect that as well . It's not too hard to do , but it can be frustrating when the easiest part (removing 4 screws) takes up the most time because their stripping out as you're removing them .
Life will be about 2 years if you use it a lot. That's about the lifespan of these types of batteries. The replacement I got is 800 mah instead of the 730 mah it came with so I can expect a longer time before charging than the old one.
@@Danny_R_ Purchase the tools to fix it, which won't cost a lot and then you can fix lots of your electronics saving you money in the long run. Just my way of thinking on the subject. Plus you will have a new skill in your arsenal of knowledge.
@@SVMSICE Yea thats actually not a bad idea.. Then i could fix stuff for friends too... But.. Its been thrown in the garbage a long time ago now. But i really should get some tools and that because i like working with stuff like that.
Yes, Sony XB12 is in stock. Would you like to send your order with the Qty. to our sales department? The e-mail address is info@cameronsino.com. The department will reply you shortly. Thanks:)
A lot more glue and tape than this video shows. The chip doesn't come out that easily just in case people doing it for the first time think something is wrong. Just cut the black glue on the seam and the one bit of tape on the black and red braided wire
Agreed...I just finished doing this . The 4 outside screws were tough to get out . It seemed like more than dirt was clogging up the grooves, so it was hard to get a grip to unscrew them . I used my dremel to cut a slot & I was able to screw them back in using a slotted. There is sealant/glue around the inside of usb connection (the shiny stuff you see in the video) . That will have to cut in order to get it out There is also sealant around some wiring that needs to be cut in order to pull the board out to access the battery . After the battery is in remember to push the usb port into the housing and then put the board down . It doesn't just sit right in. My battery was glued in, so expect that as well . It's not too hard to do , but it can be frustrating when the easiest part (removing 4 screws) takes up the most time because their stripping out as you're removing them .
I really hope the replacement will last longer than the original
Life will be about 2 years if you use it a lot. That's about the lifespan of these types of batteries. The replacement I got is 800 mah instead of the 730 mah it came with so I can expect a longer time before charging than the old one.
Volumee
It wont be waterproof anymore right?
Hi ! Is it possible to replace the charging port on the same device? Is there a video?
Thank you very much! Greetings!
Sure. You can do this.
@@Cameronsino Mine broke to... Is it cheaper to fix it or is it just easier to buy a new one. Cause idk how or nor do i got the tools to fix it..
@@Danny_R_ Purchase the tools to fix it, which won't cost a lot and then you can fix lots of your electronics saving you money in the long run. Just my way of thinking on the subject. Plus you will have a new skill in your arsenal of knowledge.
@@SVMSICE Yea thats actually not a bad idea.. Then i could fix stuff for friends too... But.. Its been thrown in the garbage a long time ago now. But i really should get some tools and that because i like working with stuff like that.
Could you show us how to remove the glue? It's impossible
Can you not remove the circuit board without un-soldering?
Can you provide link for the Battery to purchase online. India
extrabatt.com/products/cs-jmc200sl_1
how to replace with other type of battery wit two colors (Red-Black (+ -)) cables only, without the blue color cable?
Do you have replacement speakers for clip 2 or know where I can find them?
red is positive ,black being the ground . any ideal what the blue wire would be for ?
Maybe sencor
Enables playing the Blues
On mine the color was white, it is called neutral on the PC board, probably used as a charge control.
How to buy this battery i need this
muchas gracias por tu trabajo y videos saludos desde chicoloapan edo de mexico mexico.
A question. Is it possible to change the part that makes the bluetooth transmission or do I have to change the entire motherboard?
No need to change the entire motherboard
@@Cameronsino ok, thanks !
Any link on where to find the battery replacement?
Amazon 👍
What is the purpose of the third wire on the battery? I only know the negative and the positive.
It is a Ballance lead
What is the use
Can I replace the battery with Nokia phone battery? And can you please tell which one among these are positive and negative?
Good day Cameron Sino. Do you have replacement battery for Sony XB12?
Yes, Sony XB12 is in stock. Would you like to send your order with the Qty. to our sales department? The e-mail address is info@cameronsino.com. The department will reply you shortly. Thanks:)
After making the exchange is it still water proof?
As long as you put the O ring back in place and it wasn't damaged.
Where to buy battery
is the battery also compatible with jbl clip 1?
No, sorry. JBL clip 1 has another battery with different sizes
Hi Where can I buy this battery replacement for jbl clip 2?
There are plenty on AliExpress for example.
My JBL clip 2 needed a T-8 Bit for those screws
Love my clip 2
Где купить батарею? Дай ссылку на магазин!
Merci !!!
THANKS!!!
u know this has 20k views cause these batteries were Garbage! mine expanded, yet to explode. buy cheap now, pay double later....
i bet its not that easy , you tubers always have pulled these things apart before hand never thiis easy
What a pain
No pain no gain. Just waste your money and buy another one my friend.
Where can i buy this battery?
Please send an e-mail to info@cameronsino.com