How To Use The Automatic Computer Wire(Cable) Stripping Machine: Cable(Wire) Peeling Machine

See video & my blog How To Use The Computer Wire(Cable) Stripping Machine: Cable(Wire) Peeling Machine together to be an expert
Blog▶ heloveyou.com/blog_detail-172...
-----------------------------------------------------------------------------------
Website: heloveyou.com/
Use steps of automatic computer wire cable stripping and peeling machine
1. First, plug in the power
2. Then turn it on, install the straightener.Here you can replace the catheter according to the size of the wire diameter.If some of the wires are soft, you can also install the rubber wheels to straighten the wires.
3. Then install the wiring board, the wiring board is used to put the stripped wire on it. Because there is awirein the pipe of the machine, so press the right arrowbutton for a while to return thiswire
4. Then put thewirewe want to process into the catheter.Let the wire pass through the straightener first, then through the guide tube, and then press the left arrow key bit by bit until the cable head is close to the position of the blade
5. Then fix and compress the straightener and compress the wire tightly.Then click the run button to see the stripping effect.Then press the yellow emergency stop button to measure whether the stripping is accurate
Wire stripping machine control interface operation
1. Before stripping: Indicates the length of the stripped wiresheath on the left side of the cable
2. Half stripping(on the left): Indicates how muchofthe stripped wireatthe leftendof the cablewillbeen removed
3. Total length: indicates the total length of this section of cable
4. Half stripping(on the right):Indicates how much of the stripped wire at the right end of the cable willbeen removed
5. After stripping：Indicates the length of the stripped wire sheath on therightside of the cable
6. Knife value: The smaller the number, the deeper the blade will cut
7. Recede cutter: Recede is the size of the opening of the knife
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Heloveyou machinery
Heloveyou Wire Stripping Machine Product
heloveyou.com/product_mc_104_...
-----------------------------------------------------
Heloveyou Terminal Crimping Machine Product
heloveyou.com/product_mc_105_...
-----------------------------------------------------
Heloveyou Wire Winding And Binding Machine Product
heloveyou.com/product_mc_108_...
-----------------------------------------------------
Heloveyou Pipe Cutting Machine Product
heloveyou.com/product_mc_111_...
-----------------------------------------------------
Heloveyou Soldering Machine Product
heloveyou.com/product_mc_103_...
-----------------------------------------------------
Heloveyou Tape Winding Machine Product
heloveyou.com/product_mc_114_...
-----------------------------------------------------
Heloveyou Labeling Machine Product
heloveyou.com/product_mc_107_...
-----------------------------------------------------
Heloveyou Marking Machine Product
heloveyou.com/product_mc_113_...
-----------------------------------------------------
Heloveyou How To Use The Computer Wire Stripping Machine
heloveyou.com/blog_detail-172...
-----------------------------------------------------
Website: heloveyou.com/

[@Friendstuidio]

It is a ood and helpful video, very useful. please share it.

[@balkishandua8755]

VERY VERY NICE SIR HOW MACH PRIS SIR

[@Friendstuidio]

go to our website and contact us and you will get price sir: www.wire-processing.com/

[@asfarhumayun4917]

Apakah anda bisa bantu program mesin saya eror

[@alessandrobricchi130]

hi,
could you tell me how the last 2 numbers are adjusted? in your case 10 and 10
In the manual nothing is written how to do it
thank you

[@kylemitchell5890]

Do you know how to setup for different Guage wires

[@Friendstuidio]

i will make another video for your question or you can email 3qmachine in our webiste ： www.wire-processing.com/

[@Friendstuidio]

yes its easy i will make another video for your question or you can email 3qmachine in our webiste ： www.wire-processing.com/

[@Friendstuidio]

yes you can go to our webiste reach us we have a team will help you： www.wire-processing.com/

[@gisacani]

Hi, this machines can cut in 0.1 by 0.1mm lenght?

[@Friendstuidio]

yes its wasy we can customize the machine and meet all your requirements

[@Friendstuidio]

go to our website to get more details :www.wire-processing.com/

[@ssdgroupoftraders]

Hi

[@Friendstuidio]

more information go to our website： www.wire-processing.com/

[@Friendstuidio]

more details you can reach to our website contact us, we have support team to help you : www.wire-processing.com/