How To Add A HikVision IP Camera To NVR Using SADP Tool NEW
Вставка
- Опубліковано 11 тра 2021
- In this video I'll be showing you how to connect an IP camera that is connected on your network, to your NVR. This is useful when your IP camera is not connected directly to your NVR, for example if it's plugged into a POE switch.
HikVision's SADP Tool:
www.hikvision.com/en/support/...
Any donations are welcome via my paypal donation link:
paypal.me/HikGuru?locale.x=en_GB
cctv camera installation, hikvision cctv camera connect to mobile, ip camera installation and configuration, hik connect mobile setup
#HikVision #CCTV #SADP #bearwatchcctvltd #bearwatchcctv #bear watch cctv
Many thanks and cheers for actually explaining what you were doing rather then clicking here and there and typing stuff in without explaining! And yes did see such videos before stumbling across yours. The camera is up and metaphorically singing like a bird :) cheers
After dozens of videos finally someone actually explaining the procedure. Big thanks 🙏
thanks alot this is the only video i found that actully found that i was looking for
Thank you very much worked absolutely perfectly and means I don’t have to run cable from my house to my workshop. Brilliant it’s saved me hours of work
Thank you thank you thank you! I just managed to add my wifi camera to the NVR in 3 minutes, after loosing 3 hours trying to do it myself
Hik Guru - he is a hero, not the hero we deserved but the hero we needed
Great videos,really helpful . Subbed
Nice video bro... 👍👍👍
good job thanks
Thank you so much , this is the easiest video ever everyone make ir so complicated but you explain so easy thank you again
I love the way you explain could you do a video on ds7700 seting up face recognition thanks
Hello great videos, and it's good of you to be so helpfull, out of curiosity I was wondering if you get involved it setting up routers when adding cameras manually in like setting up reservations etc, I know it's the proper way but can be a minefield with all the different routers out there and passwords that have been changed and forgotten etc, also I am aware that if you go high in the range etc it is more unlikely the dhcp will give that address out on a small domestic network but not impossible without being reserved to the device mac. Sorry to ask stupid questions but you clearly know what your on about and wondered what your views are on this. Cheers.
I wish to learn more about camera network. What is a gateway, ipv4, ipv6, dns, dcp how are these used in setup menu
Very useful video, thank you! I'm going to a site this week coming to add additional cameras via poe switch over WiFi bridges. This going to be a really silly question, When connecting my laptop to use SADP tool, do I patch it in to the NVR?
Great video. I have an older Hikvision NVR that will not cooperate and I cant delete cameras. perhaps it needs a firmware update but none available. I don't have the option to remove cameras.
Awesome videos could you or do you have a video on how to add a PoE switch to a system with IP camera
A brother can confirm that to view a camera on SADP it must be the same network it was linked to or view on a new network? Help me please
Thank you for another great video. Just a quick question off topic but i see you used an i series nvr but when you logged into it you didnt have any problems going to live view. When i go to live view on mine using microsoft edge i have to use an internet explorer plugin and then have to click on my first camera and then change it from main stream to sub stream and then click on start live view otherwise i get live view failed or i cant see the camera picture when trying to set up intrusion areas or lines under events.
I have a new intertnet provider i managed by set up two of my three cameras. But the one of them (an ip camera) shows in the SADP as active but i am not able to change the IP to the new one as i used with the other two. When i hit modify , it does not do anything and after about 6 seconds message error " time out".
Hi may i ask: