2005-2009 Mustang GT Axial LED Halo Fog Lights Review & Install

Поділитися
Вставка
  • Опубліковано 16 січ 2025

КОМЕНТАРІ • 30

  • @americanmuscle
    @americanmuscle  6 років тому +1

    Shop this Axial LED Halo Fog Lights: muscle.am/2EC2uC9
    Subscribe For Daily New Mustang Videos: muscle.am/SubscribeAMyt

  • @popeye5808
    @popeye5808 6 років тому +32

    Forget the fog lamps, show me how to install that super charger. Lol

  • @hivoltagefx4
    @hivoltagefx4 6 років тому +2

    Just picked these up for my '05GT and I love them!

  • @Mustangladyme
    @Mustangladyme 2 роки тому +1

    Thanks for mentioning they each are right and left.

  • @kenzotenma3812
    @kenzotenma3812 4 роки тому

    I bought these from you guys! Also Stephanie you're so cute!

  • @scringe1
    @scringe1 6 років тому

    I'm sure it makes a big difference from stock. Well done.

  • @tommysmith5267
    @tommysmith5267 Рік тому

    Should have added heat shrink on top of the spade connections make it more safer and reliable

  • @05gtdriver
    @05gtdriver 6 років тому +3

    I learned the hard way...... word of advise, use some painter's tape on top of the bumper where it meets the bottom of the grille..... upon yanking the grille off(as described in this video) the bottom side of the grille's tabs will leave scratches on the top side of the bumper....not cool.

    • @americanmuscle
      @americanmuscle  6 років тому +3

      Good tip! No where did I say to "yank" on the grille to get it to release from the car, though. - Stephanie

    • @05gtdriver
      @05gtdriver 6 років тому +3

      @@americanmuscle You caught my liberties in translation LOL
      I described it using my experience in removing the grille. Sorry Steph! I must say, looks like you've been hitting the gym! Keep up the good work at AM :-)

    • @wl6279
      @wl6279 4 роки тому +1

      @@americanmuscle you tell em stephanie lol

  • @McNoodleSailor
    @McNoodleSailor 6 місяців тому +1

    EDIT: I finished the install, didn't know what the yellow wire was for so I just didn't use it, fog lights and halos seem to work just fine without it, so I rolled the yellow wire up and tucked it out of the way, not gonna bother with it.
    for people who don't already know what each wire does (myself included), It'd be great if you said what each individual does, rather than just saying where you are splicing them, so that we can better understand what is going on at a fundamental level so that we may make more informed decisions on how we personally would like to splice our own wires.
    for example, if we're plugging the ballast into the factory fog light connector, why does the yellow wire of the supplied wiring harness need to splice into the white wire of the headlight? I would think that both the power, and ability to switch that power on/off (to the new fog light) is already accomplished by the factory fog light connector via the headlight switch in the dash, the yellow wire is the only one i really don't understand here
    This is how i currently understand things:
    - factory fog light connector supplies power and ground source as well as the on/off switch for fog light ---------
    - red wire of supplied harness - uses parking light power to operate halo light ----------
    - yellow wire of supplied harness - ??? what is this for? it is never mentioned in the video what this wire DOES, what is it for exactly? -------
    in the video, you position the harness so that it can be spliced into the white wire while "still being able to reach the battery", this mention of reaching the battery is never explained, but Im assuming that if it needs to reach a battery, its for power, so this leads me to believe that we're tapping into the headlight wire for power with this yellow wire
    but as i had just theorized, the factory fog light SHOULD already be the power source for each individual ballast, thus my confusion.
    SPILL THE BEANZ WUTS THE YELLA WIRE FOR?? TELL US YOUR SECRETS! if you'd be so kind.

  • @ErickMorales-vw9ht
    @ErickMorales-vw9ht 10 місяців тому

    Won’t the halos also blink with the running lights when using the turn signal?

  • @mooosestang
    @mooosestang 2 роки тому

    Are these exactly the same as the ACCELATEC sold by CJ pony parts?

  • @Cdawg1871980
    @Cdawg1871980 Рік тому

    I’m about to do mine tomorrow. Only part that confused me was you said make sure there’s enough wire to reach the battery . But nothing ended up going to the battery. Yellow to white headlight and red to running light power ? Did I miss something?

    • @Jordan3v
      @Jordan3v 9 місяців тому

      Did you figure it out?

  • @GMdrivingMOPARguy
    @GMdrivingMOPARguy 6 років тому +1

    Is there also a similar setup for the regular headlights? Would like to do all of them so they match.

    • @Aaron36983
      @Aaron36983 6 років тому

      Any led headlight kit will have the same pure white look to match

  • @hachimachi4320
    @hachimachi4320 2 роки тому

    I installed these myself and for some reason the left wire on that harness did not give power to the halos. When I connected the red wire that was supplied to the right side of the harness they came on but my other wire had been cut. The left side wire was still cut but I reconnected them because smaller parking light bulb did not come on anymore but I fixed that issue and now the halos do not come on.

    • @hachimachi4320
      @hachimachi4320 2 роки тому

      To add on this, when the regular headlights were on, the halos did not stay on

  • @djtoo7
    @djtoo7 5 років тому

    are these 6in round or 7in round lights?

  • @elsayayinespartano2411
    @elsayayinespartano2411 4 роки тому

    Can these be installed on a mustang v6 07?

  • @mooosestang
    @mooosestang 2 роки тому +1

    There's got to be an easier way to wire these

  • @Mustangladyme
    @Mustangladyme 2 роки тому

    Very easy. I'm a 63 woman and I did it no problem.

  • @wusthof641
    @wusthof641 10 місяців тому

    What's the beam pattern like guys? I don't care about the halos as I wouldn't hook em up. Beam pattern and brightness? Thx everyone

  • @austinklingel
    @austinklingel 3 роки тому +1

    Hello, tried installing these on my 07 Gt, the fog lights come on. And I’ve been following every step, but the halos do not come on at all, plugged the yellow into the white wire and the red into the left wire on the DRL, tried everything, they still don’t come on. I need help please.

    • @brnd773
      @brnd773 3 роки тому

      Im having the same issue, have you resolved it?

    • @GatorNation-fk4sv
      @GatorNation-fk4sv 2 роки тому

      Did you ever fix it

  • @Bin_hassan_85
    @Bin_hassan_85 6 років тому

    We whant to see the morimoto headlights plz