Hand Starting 10,6 Cubic Cm. True Diesel Engine

I had made the parts for this engine except for the crankshaft and flywheel to bee a horizontal hot bulb engine, but it ended up to bee a true diesel engine. Bore-Stroke 20-34 mm.Compression ratio 19-1 Fuel Kerosene Direct injected Build by :
Find Hansen Denmark
Web address : www.findsminimodelhotbulbengines.DK

[@Raj-nh3fc]

Very nice Mr Hansen. This horizontal engine reminds me of my childhood in a different country at a different time. We had a 18-20 HP Cooper horizontal diesel (crude oil) engine used for milling rice, grinding corn and expelling oil. Beautiful sound.

[@canusakommando9692]

Wow! If only I had 1% of your skill I could get some of my projects done. Just the way it ran at low rpm and the easy way it started? You Sir are a Master Craftsman.

[@LTD184]

This is a piece of art of mechanical engineering!
As a student of mechanical engineering i really can imagine, how much work you need to develop and finally to produce such an engine by your own!!!
God bless you, Mr. Hansen!

[@boksermotor]

Thank you for your fine comments.

[@topheliflyer]

This is a superb engine which runs as beautifully as it looks. The work of a true craftsman! Thank you for sharing!

[@boksermotor]

Thank you for your fine comments

[@TheMacandpcguy]

May i ask what injection pressure the fuel pump creates

[@Knexfoof]

May I ask how is the injector constructed? I assume a sprung needle valve with a few tiny ports in the end?
Also roughly how much fuel dies each injection use?
Wonderful engine. I love the detail and sound

[@kapilsethi8054]

As you said, you have used kerosene as fuel, will these engines also work on real diesel, which we use in car?

[@FrenchValleyAirport]

amazing injector, beautiful craftsmanship, you're a genius

[@enginelover1]

Wow again, that injector tester is very nice. Your hands make marvels small things.

[@courierdog1941]

That would make an excellent Marine diesel engine scaled up for a UK Narrowboat. I just love the old style low revving High Torque Diesel engine. Childhood memories of the Home made Diesel engines used in the Maritimes on the coastal fishing boats.

[@jameshickman5299]

Greetings,
Your engines are incredibly beautiful.
And the way the injector atomizes the fuel is amazing.
Have you ever put a tachometer on your engines?

[@Andreschannel_SA]

Absolutely excellent craftsmanship. Beautiful engine.
Anything smaller would be able to fit inside a wristwatch.

[@timd8776]

Can I ask where you get the castings from?? Flywheel and base/cylinder etc? Loving your work.

[@mytmousemalibu]

Magnificent work Find! That one runs so nice! Your six poster as a diesel would be the crown jewel! I would love to see more about your latest diesel injector nozzle design, would you consider a video on it? Is this still of the poppet style injector or a needle type? Thanks for sharing! Cheers!

[@rccardude04]

Shouldn't you be working on your car? Lol

[@boksermotor]

Thank you for your fine comments. Yes I still use a poppet needle valve, and I have thought about recording an injector building video, because many has asked for more details how it is constructed.

[@magnusklahr8190]

That is real craftmanship! What a beautiful engine! Thanks for sharing.

[@davidjames1007]

Truly beautiful, you are a very skilled man. Thank you for sharing

[@douro20]

I wonder how well turpentine would work as a fuel?

[@Grumpy_old_Boot]

A beautiful engine as always - Well done, and thank you for sharing it with us. :)

[@boksermotor]

Thank you for your fine comments.

[@davesmith9325]

Beautiful work. Thankyou for sharing

[@roddudaful]

Nice engine. Very impressed with the detail and efficiency as it runs

[@Sunitapatidar9090]

Sir how you make tiny spray nozel ??? Please reply

[@Seegalgalguntijak]

Thank you for sharing yet another of your marvellous works of art! I would so much like to be able to afford one to let it run and watch it work whenever I like to. But for now, I will have this video which shows it to me.

[@boksermotor]

Thank you for your fine comments.

[@Hotrodelectric]

Good God, you do some beautiful work.

[@mjstow]

Stunningly beautiful.

[@captpaulhaugan]

I was taught that the fuel charge for a naturally aspirated diesel is 1/100,000 cylinder volume idle and 1/20,000 full fuel. How do your numbers compare?

[@magnetstoo]

You are one of the best...Only from Europe have I seen those with patience to build such a delicate machine. Sehr Gut.

[@joandar1]

Magnificent Workmanship, as well as a sweet running engine!

[@boksermotor]

Thank you for your fine comments

[@Ziknazoo]

More stunning craftsmanship! One question: what do you use for paint? The paint work is fantastic! I've been looking for some good paint to use on my model engines. Paint that looks as great as yours and durable as well...

[@boksermotor]

Thank you for your fine comments. I use two component acryl auto paint.

[@thomassmith1860]

Cool video

[@tomaskeller4200]

Could you tell me what for a fuel do you use to power the engine.

[@garrettnelson2293]

will you sell me one to put in my bedroom.

[@1997cr80r]

Amazing. Pure amazing!!

[@boksermotor]

Thank you for your fine comments.

[@oscarnfcp3510]

Nice work sir! Super inspiration!

[@Nrgzrbunny777]

Another beautiful engine Find! I wish I could afford to buy one!

[@boksermotor]

Thank you for your fine comments

[@WojciechP915]

How long did it take to build this engine?

[@boksermotor]

Thank you for your comment, but I never count the hours..

[@deserteagle190x8]

nice engine but what fuel do you use. it to low of normal diesel

[@FrenchValleyAirport]

he said kerosene

[@litefoot900]

Engineering excellence!

[@boksermotor]

Thank you for your fine comments.

[@FunnyHacks]

Worth every second. Great work!

[@boksermotor]

Thank you for your fine comments.

[@Howard_Ravenhill]

Great video :)

[@boksermotor]

Thank you for your fine comments.

[@plante1999]

Such a beautiful engine

[@boksermotor]

Thank you for your fine comments

[@StumpfsCurse]

Wonderful. :)

[@boksermotor]

Thank you for your fine comment.