小飛象遙控器ddf 350固件升級視頻帶定速巡航How to upgrade the firmware of Dumborc ddf 350 transmitter cruise control
Вставка
- Опубліковано 10 жов 2024
- 可以訪問小飛象官網，下載最新的固件。2023年12月份後的遙控器，均自帶有定速巡航功能。
With cruise control function #ddf350 #dumborc #transmitter #rchobby #rctransmitter
固件下载地址：www.dumborc.co...
Firmware download link：www.dumborc.co...
固件更新过程中，遥控器电池仓里面不要放电池！！！！！！！！
During the firmware update process, no battery should be placed in the transmitter battery compartment!!!!!!!!!!!!
Спасибо вам огромное. Это самое информативное видео что я только смог найти по этой теме! 😀
Если ещё сделаете виде со ссылкой на инструкцию - будет просто класс!
Я рад, что тебе понравилось видео
С субтитрами, с помощью переводчика, должно быть хорошо понято содержание видео.
Need these videos in English as well. Also need the updates in the English version of the website. I had to use the translate software in my computer to find the new software.
Just use the translator and follow what he's doing. Where's the problem?
1.1.3 release. What is the P series receiver, i cant find them. Is any new options works with x10fg receiver?
In English would help as most country’s speak even just a bit of English
Hi guys,
My receivers don't seem to match a certain gyro I want to use on my drift RC car.
Maybe you'd know of a different receiver I could use to match the PWM frequency of my high end gyro (333hz).
I'm using a x6fg receiver and even after trying multiple ones it still doesn't steer even if the gyro itself can move the servo just fine.
I haven't yet tried a x6dc, x6yc or x10fg.
If you can find a solution to my problem I'd be greatly grateful.
Cheers
Can I downgrade firmware from 1.1.1 back to 1.0.9? I think there is the problem after upgrade firmware. Sometimes signal losses to receiver but in range of 5-10 metres.
Of course you can downgrade.
My upgrade didnt work and cant use my transmitter
i hope it has english sub.. very informative
It doesn't work!Update failed and transmitter won't boot up anymore!Don't update this.
If the previous version is a new version after 1.0.9, you only need to download the new firmware, decompress it, and run the decompressed batch file directly, without copying it to the USB drive.
Can you please make a English version of this 😊
How can i plug leds lights of my rc car to x10fg receiver?
You can plug the light into the led port in the upper left corner, and use CH3 to control it on and off. Remember to series a voltage resistor in case the led lights burn out.
this transmitter, connects to the computer via usb, to play a simulator?
Yes.
I lost everything can't even use my radio now ugh
What happened? Did you solve it?
Same here how to fix it
@@kniaz847you have to reinstall the old firmware 1.0.9 from a folder called DDF. Idk how I was able to download it because I clicked the same link in the video and two different files popped out. First time was the DDF file the second was the file in the video. If you can try to get that folder. Make sure everything is erased off your tx and then run the upgrade file. It will put one file on your remote. Unplug the remote and hold the power button till it turns green and goes off. Turn it back on it should have the old firmware. From there go to the new firmware click the update file and it should put one more file on the tx. Unplug again and hold power until green light comes on and tx turns off. Then turn back on and check version number. That’s how I took mine from bricked to the new firmware. I never saw that screen he had where stuff installed lol. It just worked after those two files were on my remote. One big issue is when you put the remote in usb mode sometimes it deletes all the data. It took me a minute to realize it was deleting all the files. If it doesn’t work after you install the second file check your remotes folder and see if there are any files in there. I went through a dozen times accidentally deleting the files while trying to update. Hope this helps
@@kniaz847I tried to send you the solution but they keep deleting my comment lol
Instructions in english or with subtitles please?
yes，with subtitles.
@@easthobbyThere’s no English subtitles.