great idea! eye bolts instead of U bolts i think ill use just to save drilling so many holes in an already fairly lightweight metal. Thanks for the inspiration!
Looks good. A material list would be appreciated. Video sped up, slowed down. Is that intentional on your end or a side effect of the latest upgrade from either the phone or yt? Thanks for sharing.
If it fits in the fire scape you can take up a fridge to the porch. I would load the fridge in a hand truck or two-wheeler, whatever you call it, then put it in the hoist, when it gets to the top of the stairs just move in.
Great invention its great to see good old American no how. You got a new sub and I rang that bell. I need to build one .Please supply the link to the motor. What type and model number. I already ordered the cam followers.
Hi how are you today I hope we'll So can you tell me the real name of the rollers or washer you are using on the lifter I mean you buy at Amazon you Said
Hello John, I definitely learned a lot from them too. Here’s the link Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
Thank you for the quick reply. I looked on Amazon, before and i couldn't find any casters with the threaded shaft to mount that way. I bought a set of 4 fixed wheels because the sled was bumping the lower ladder when traveling UP. If my present wheels don't work, I will try these items you used. Thanks again...
@@scn102 They came with the winch here’s the link. 110V 440 Lbs Lift Electric Hoist, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting with Emergency Stop Switch a.co/d/gmxyk1D
Ive saw several home made lifts and this is by far the best ive seen on UA-cam. Very nice.
Glad you like it!
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
the best ladder hoist I have seen.
Thank you
I use it in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Excellent concept and I'm pleased how simple you kept things. Elegance in design is the simplest of design!
thank you check out Ken’s Karpentry channel.
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Nice fabrication!
Stay safe, Joe Z
Thank you
@@Joshofalltrades756 You're welcome.
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
great idea! eye bolts instead of U bolts i think ill use just to save drilling so many holes in an already fairly lightweight metal. Thanks for the inspiration!
Thank you
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Looks good. A material list would be appreciated.
Video sped up, slowed down. Is that intentional on your end or a side effect of the latest upgrade from either the phone or yt?
Thanks for sharing.
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Olá meu amigo parabéns pelo seu trabalho 😀👍🏼🇧🇷
👌
Well Done! The bearing's are called cam followers.
Oh okay! Thank you 🙏
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
If it fits in the fire scape you can take up a fridge to the porch.
I would load the fridge in a hand truck or two-wheeler, whatever you call it, then put it in the hoist, when it gets to the top of the stairs just move in.
A little dicey
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Buen proyecto gracias por compartir
Ningún problema
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Great invention its great to see good old American no how. You got a new sub and I rang that bell. I need to build one .Please supply the link to the motor. What type and model number. I already ordered the cam followers.
110V 440 Lbs Lift Electric Hoist, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting with Emergency Stop Switch a.co/d/gmxyk1D
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Thanks for sharing bro.
Thanks for watching
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Please supply a material list. Thanks
I hope you put a piece of plywood as a backboard, so if the load shifts it doesn't get caught between the rungs,
Good suggestion. I’ve only used if for full sheets of sheathing. It hasn’t been an issue yet.
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Where did you get the wheels, and what size?
Going to build this to get chimney block and bricks onto a roof. Thank you for a great video?
Here’s the link
Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
@@Joshofalltrades756 thank you, but the 2 rubber wheels at the end of the ladder.
Thank you!
www.amazon.com/Wheels-Replacement-Trucks-Lawnmower-Oregon/dp/B09BJNPS46/ref=mp_s_a_1_2?adgrpid=56344433899&hvadid=274901076370&hvdev=m&hvlocphy=9003152&hvnetw=g&hvqmt=e&hvrand=13571594809007309046&hvtargid=kwd-339324295834&hydadcr=13306_10208809&keywords=7+inch+lawn+mower+wheels&qid=1681498768&sr=8-2
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Consider a upgrade modification. Add up and down limit switches to prevent self destruction. Overall you did a nice job!
Thank you 🙏
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Thanks for sharing. I just build mine.
nice
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
where do you get the bearings
Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
Whats the name of those bearings washers by the sdie called. Kindly send me the name or the link. Thanks
Here’s the link
Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
i thikn people overcomplicate this thing. i would start with square section and just keep the hoist and ladder two separate things
Cool
Thx
Any time
Hi how are you today I hope we'll
So can you tell me the real name of the rollers or washer you are using on the lifter I mean you buy at Amazon you Said
Here’s the link
Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Watched again
Thank you
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
I want one for 2 floors
That’s one way to do it!
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
I think I would have used the Ex wife as the test pilot, instead of the current model 😂
haha
You can see it in action in this video
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
Running over the controller and it needs bigger wheels
Needs some improvements
You can see it in action here
m.ua-cam.com/video/S64tXgq7zA4/v-deo.html
😊
👍
Hello John,
I definitely learned a lot from them too. Here’s the link
Beilay 4Pcs CF10/KR22 Steel Cam Weights Follower Bolt-type Needle Roller Bearing www.amazon.com/dp/B092MCL587/ref=cm_sw_r_cp_api_i_ZG5E7RA15QJPP46V1KHK?_encoding=UTF8&psc=1
Thank you for the quick reply. I looked on Amazon, before and i couldn't find any casters with the threaded shaft to mount that way. I bought a set of 4 fixed wheels because the sled was bumping the lower ladder when traveling UP.
If my present wheels don't work, I will try these items you used.
Thanks again...
@@johnkosick1464 thanks for watching!
Hey buddy awesome. Video.. Question on the rollers- do u have the exact part # because theres like 6 different sizes . ty in advance
Also what about the pulley \ snatch block do u have info on that? thx
@@scn102 They came with the winch here’s the link. 110V 440 Lbs Lift Electric Hoist, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting with Emergency Stop Switch a.co/d/gmxyk1D