How to Configure Multi-WAN on pfSense | Step-by-Step Guide
Вставка
- Опубліковано 20 жов 2024
- #pfSense #MultiWAN #LoadBalancer #NetworkSecurity #TechTutorial
In this video, I'm going to show you how to configure a Multi-WAN setup on your pfSense box. If you have two ISPs and want to optimize your network with load balancing, this tutorial is for you. Follow along as we go through each step to ensure a smooth and efficient setup.
📽️ In This Video:
*Introduction to Multi-WAN: Understanding the basics and requirements.
*Network Diagram Overview: Explaining the setup and IP configurations.
*Interface Configuration: Renaming and setting up your WAN interfaces.
*Gateway Setup: Configuring and monitoring your gateways.
*Load Balancer Configuration: Creating and setting up a load balancing group.
*Firewall Rules: Establishing rules to pass traffic through the load balancer.
*Verification: Testing and verifying the Multi-WAN setup.
Amazon Affiliate Links:
Anker USB C Hub 8 in 1 amzn.to/3QOeuTM
Anker USB C to Dual HDMI amzn.to/44FIgjz
StarTech.com USB 3.0 to Dual HDMI Adapter: amzn.to/3QHWpGT
These are fast-selling products through our Amazon affiliate links, check them out and help us earn a small commission when you purchase products through our links. Thank you!
HELP ME MAKE A DREAM OF 500,000 SUBSCRIBERS
📖Disclaimer: All contents provided by this channel are meant for EDUCATIONAL purposes only.
BUY me a coffee: paypal.me/toro...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow me on social media:
Facebook: / ginard.guaki
Linkedin: / ginardguaki
Twitter: / ginard_guaki
☑️For business inquiries, gifts, collaborations, PR packages & sponsorship:
Email at: ginard09395611387@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Please don't forget to LIKE, SHARE, AND SUBSCRIBE. Let us Keep the love and support burning. Love you all. 😍😘
#pfsensemultiwan #pfsenseloadbalancing #torogipro
Hello, I love your videos they are direct and easy to follow. I have a newbie question though maybe u can point me to the right direction. I have three ISPs with ISP-1 and ISP-2 both having 30mbps and ISP-3 with 50mbps. What I'd like to do is use ISP-1, ISP-2 and ISP-3 for general usage but with ISP-3's bandwidth toned down to 30mbps (this will be ISP-3a). The remaining ISP-3b 20mbps will be used for usage of special clients. So all in all I have virtually 4 ISP's (ISP-1, ISP-2, ISP-3a and ISP-3b) and I have 5 ip address for each actual ISP.
My questions is, Is there a way to split ISP-3's bandwith to two (30mbps and 20mbps)? Im thinking of adding a network switch between ISP-3 router and my PFs box so I can use two ip addresses and connect 2 cables to be able to use 2 ip addresses then connect to my PFs box. Do you know a better way maybe?
If i were you, i will add 3 ISP using multi-wan. 30mb+30mb+50mb. Now group the the clients with alias, then group the special clients with another alias. Now you can assign 20mb to special clients and the rest will be for general purpose. Your bandwitdh will be load balanced into your 3 ISP.
Torogi Pro Thanks for the reply sir, will definitely try this out :)
Awaiting for ur next tutvid.. wish you could do the Radius and Captive Portal next :)
LIKE, SUBSCRIBE, COMMENT, SHARE!
Very Good .. Greetings from Paraguay/ Muy Bueno ... Saludos desde Paraguay
Thanks
Yeah! Thanks for listening!
Well Done !!! thank to you I was able to setup my pfsense setup
thanks for this tuts, easy to follow. more tutorials to make sir. very nice tutorial
Thank you! Got it all setup, with your help, of course.
thanks. simple and effective
Aftertrying and trying at least works with my pfsense
@6:17 - you did not test if the loadbalancing is working, you just tested if both ISP is up & can ping their monitor ip.
I was thinking the same thing. If you ping something outside of your network from a machine on the network. It should take two paths when you try to ping the same destination multiple times.
Galing mo sir sana more tutorial pa
And when you are going to test if load balancing is working??
Tengo el FW con 2 ISP diferentes, los tengo en el balanceador de carga. También puedo configurar VPN IPSEC en cada ISP pero necesito que sean conmutables entre ellos en caso de caida de alguno de los 2 ISP. como se configura esa conmutación?
I have two WAN's ISP_A and ISP_B and just one LAN...
Both Gateways pings and connects but the system IP's under the ISP_B are not pinging?
any idea why? If the gateway ping then why not? 😔😔😔😔
Boss, kpag netgate pfsense appliance na yung gagamitin, pwede ba gwin ang 3 o 4 na ISP? paano po kaya to maconfigure?
Sir i have my dell 3010 with pf i have 6 lan card installed 2isp for lan and 2 isp for lan2 lan2 for hotspota lan1 for fiber connection is it possible to balance the 4isp togeher and how then may i know how to speedtest the mb signal from pf before balansing how did you do it
hi sir your videos very helpfull.
sir can you guide me that how to divide bandwidth group basis?
If i have 10 client pc do i need to install this sofware to every pc? Why not just use a load balancer router? How dofferent are the two? TIA
Boss Torogi Pro, I have a question po.
Meron kasi akong i5 9th Gen PC, 8Gb RAM at Gigabit LAN port at TL SG108E Easy Smart Switch.
Meron akong PLDT Fiber LAN1 600Mbps + PLDT Fiber LAN2 100Mbps + Globe Fiber 300Mbps>
Nag configure ko naman ng maayos yung Load balancing pero pag nag Speed Test ako nakukuha ko lang is 700+ Mbps.
Ask ko lang kung may kulang pa ba akong config kung bakit hindi ko ma-maximize yung Internet Speed ko?
TIA
It is not load balancing rather HA configuration as Active-Passive
can i use vlan to add my isp2 in my pfsense?
Sir after you made the configuration, was the bandwidth from the two isp aggragated upon speedtest?
Dito rin ako interesado sa tanung. Sana masagot?
Hello
I followed the tutorial and I was able to immediately activate the load balancing function with 2 connections.
Looking at the results with 2 connections I thought about buying a third one but I haven't been able to configure pfSense can you help me? Thank you
Sana sir sunod na video yong deny all website but one, sample gmail at google drive lang po ang ma access. Thanks po :)
Coming soon.!
Good day sir.. can i use my pc to run pfsense as loadbalancer for my 3 isp..? thanks
Pfsense,, we need hardware or we. Can use this with usp wich is better
Merci pour l explication
is it going to failback when the primary wan is up again?
Thanks kababayan
I dont get it...do you still need a static route?
Could you please explain for me how i can setup an VPN with Load Balancing?
Same problem here.
Is it possible to install 2 instances of pfsense on the same lan or it cause conflits?
Is there a way to Internet/Broadband Bonding with PFsense?
Aside sa ng loadbalancing sila sir yung speed ng net connection ng easch ng fusion/ na saniba pwersa ba sila ?
Yes mag add ung bandwidth nila.
Et bonne continuation
may 4 port po ako lancard. 2 wan 1lan. peru bakit pag nag browse ako sa internet hindi sa pfesense dumdaan. kundi diretso sa mismong lan kung saan naka kabit ung wan. vmware nga pala gamit ko.
Sir is it possible for 10 WANS?
hallo brother ,pfsense load balancing table size problem inState 100% internet down
Thanks :)
sir this is my situation, isp 1 100mbps, isp 2 100mbps, kapag nag load balance ako sa pfsense 140-150mbps lang nakukuha ko na speed, bakit kaya d ko maabot ung 200mbps
Best!!
What if you get the /30 ip address from your isp
This doesn't combine Both ISP right? only if 1 ISP is down another one will activate?
It will loadbalance 2 ISP. 2 ISP can be active at the same time. Some users can use ISPA and others will use ISPB. The router will kinda divide users so that they will not ONLY use one linK, some users will be fed to ISPA and others to ISPB. now when one link goes down then others using that downlink can be transfered to the active link without any physical inrervention or configuration.
@@torogipro Right but will it combine both ISP's speed for one user using torrent?
@@UzairAli001 no.
@@torogipro Thanks for clarification.
sir request lang po kung pano mag configure ng static ip sa mga client tapos magconfigure po ng bind dns sa pfsense, salamat po
Configure ka DHCP server. Click mo ung ARP para mareserve ung IP using mac address ng client
tutor routing game dan sosmed biar bisa pisah traffic gan
galing mo bru, pa help po, paano po mag creat ng vpn para po ma remote ko sa bahay ang pfsense firewall sa officenamin
paantay nalang paps, hopefully makagawa ako ng tuts ng pfsense sa january. dami kasi pinag bbsihan ngaun. Thanks!!!
@@torogipro thanks bru, cant't wait looking forward , hoping this dec. earlier :) :)
@@torogipro nakagawa ka na ba sir? di ko kasi mahanap sa page mo sir, GOdbless more power sir
can i have 3 or 4 wan?
Ano po setup ng box ninyo?
*hardware
3:36
Need to allow DNS requests prior to your LAN rule otherwise traffic will be funny. This guide will not result in a working configuration.
t . y
load balance, wan A 40mb, wan B 40mb, wan C 20mb, I want all game port traffic to wan C, all sosmed facebook whatsapp traffic goes to wan B, please make this video tutorial, thank you