This is great stuff. I've used auxiliary surfaces before, but this makes them even more effective than I realized. I've been ignoring "Relative to Surface" for too long, and I wasn't even aware of the style hierarchy in the Site.
As a Photogrammetrist I can tell you breaklines (or feature lines as you call them) are all you need to create a good surface. You can not capture the shape of the ground with points alone.
Hi there. Usually I create my feature lines first and each one in different site and when I tried to do grading, an alert said: this feat line is not belong to this group. So how I can move them to the new group? Thanks
I dont understand how the subgrade auto-volume works @ 58:15. Is purple area a completely flat reference surface lowered by 12 inches relative to a selected gutter reference point? What happens if the middle of the carpark is graded on a downwards slope, such that an area is more than 12 inches below the selected gutter reference point (this area would not have any pavement depth)? Would this work? Copy the FS surface (name: "FS-copy"), add a boundary to represent the purple area, lower the FS-copy by 18 inches using 'Edits' - 'Raise/Lower Surface'.
Good video. However, I don't think it's a good idea making the (Face) Top and Back of Curb elevations +0.50' relative to the "setup surface". I think it's better design to make the (face) Top and Back of Curb elevations 0.50' higher than your gutter (or bottom of face of curb) elevation b/c you will have a slight discrepancy (more than 0.50) between the top and back of curb due to the sloping of the setup-surface and the horizontal distance between the gutter and the top and back of curb lines. You should also set your back of curb elevations 0.00 relative to the (Face) Top of Curb line and the (face) top of curb +0.50' relative to the gutter (flow) line. Kind of like you did later in the video where you edited a gutter elevation and then updated the top and back of curb elevations relative to the gutter elevation. Good tips on many key features of C3D. I wish AD would make parent and child links perpetual rather than a one-time deal.
i dont understand how to set the feature line hierarchy my software does not have primary and secondary feature. How can I go about creating this hierarchy
@HisKingdomNotMine Thank you for your comment: The feature line must be in a site for the hierarchy to work. The hierarchy is set in the options tab of feature line site properties of the site, the higher in the list the more prominence it has.
First and foremost, great video. Like Jeff Bartels, you always make great content. I have one suggestion. Instead of using featurelines for the top face and top back of curb, use custom grading groups. I use custom grading groups to control the top face and top back of curb. If the elevations of the flow flowline change, the top face and back of curb change as well automatically.
James, thanks for the feedback. We used to advocate grading groups as well, but they are just so buggy, so many users won’t rely on them. And while it’s not shown in this video, we’ve actually created a tool call Auto Grader that’s a total game changer with site grading. It utilizes feature lines, but automates the creation and updating of them. Check out this recent webcast on using it in commercial sites: ua-cam.com/video/YDfdbZwilLU/v-deo.html Here’s the a link to download a trial as well: www.ctcsoftware.com/product/cim-project-suite-2021/
Hi Eirik, If you post your email address either here or in a request email for the working files to marketing@ctcsoftware.com I can get the files to you. Hope that works!
I saw your first 20-minutes or so and somewhat disagree. I partially use the feature lines and other grading tools, but still grade using polylines. I tried using just Civil-3D to grade an entire site, but when it comes to revising one simple grade line, it is much easier to move a polyline manually then trying to remember how I graded the site with Civil-3D tools. Way too complicated and is like trying to push a thumb-tak in the wall with a sledge hammer. Your detention basin grading example is more for an ideal site where you are unconstrained on all sides. Use a real example were you have wetlands (transition areas need tone considered) and are on a side of a hill and you need to use retaining walls. Civil-3D cannot handle it..... Just my opinion. I have been using Civil-3D since it came out and AutoCAD since the early 90's..
I have been finding that I feel much the same way. I am a relatively new engineer, but most of my training has involved using only Feature Lines, Grading Objects, etc. to grade sites, but it often seems to create more stress/headache/extra work.
If you enjoyed this video there is a newer tool called Auto Grader that we released that drastically improves Site Grading Workflows as well! More information can be found here: ctcsoftware.com/product/cim-project-suite-2021/#autoGrader
All kidding aside, I'm happy that feature lines are the primary tool being taught here, it was through frustration, trial and error, and error that I've discovered to do this, and I'm always wondering if I'm missing out big time.
Hi Brian, where can we get a CAD file with your label styles shown in this video? I would like to use your label styles.
Thanks,
Tou
This is great stuff.
I've used auxiliary surfaces before, but this makes them even more effective than I realized. I've been ignoring "Relative to Surface" for too long, and I wasn't even aware of the style hierarchy in the Site.
As a Photogrammetrist I can tell you breaklines (or feature lines as you call them) are all you need to create a good surface. You can not capture the shape of the ground with points alone.
Thanks sir, completely excellent masterpiece of grading technique
Hi there. Usually I create my feature lines first and each one in different site and when I tried to do grading, an alert said: this feat line is not belong to this group. So how I can move them to the new group?
Thanks
I dont understand how the subgrade auto-volume works @ 58:15. Is purple area a completely flat reference surface lowered by 12 inches relative to a selected gutter reference point? What happens if the middle of the carpark is graded on a downwards slope, such that an area is more than 12 inches below the selected gutter reference point (this area would not have any pavement depth)? Would this work? Copy the FS surface (name: "FS-copy"), add a boundary to represent the purple area, lower the FS-copy by 18 inches using 'Edits' - 'Raise/Lower Surface'.
@benm2918 If you would please reach out to use via info@ctcsoftware.com we can setup a time with you to walk your through your questions.
Your methohd of using auxiliary surfaces is really efficient and graceful)
Thank you. We've since developed a tool, called AutoGrader, and Label Genie which further automate site grading processes.
Good video. However, I don't think it's a good idea making the (Face) Top and Back of Curb elevations +0.50' relative to the "setup surface". I think it's better design to make the (face) Top and Back of Curb elevations 0.50' higher than your gutter (or bottom of face of curb) elevation b/c you will have a slight discrepancy (more than 0.50) between the top and back of curb due to the sloping of the setup-surface and the horizontal distance between the gutter and the top and back of curb lines. You should also set your back of curb elevations 0.00 relative to the (Face) Top of Curb line and the (face) top of curb +0.50' relative to the gutter (flow) line. Kind of like you did later in the video where you edited a gutter elevation and then updated the top and back of curb elevations relative to the gutter elevation. Good tips on many key features of C3D. I wish AD would make parent and child links perpetual rather than a one-time deal.
where e can find practice files ,can you please suggest any way to practice along your webinars?
How do I get this label style for the featurelines?
Amazing stuff! Really great insight
i dont understand how to set the feature line hierarchy my software does not have primary and secondary feature. How can I go about creating this hierarchy
@HisKingdomNotMine Thank you for your comment:
The feature line must be in a site for the hierarchy to work. The hierarchy is set in the options tab of feature line site properties of the site, the higher in the list the more prominence it has.
This is very useful stuff. How can I get this drawing file. if anyone have this could you share
how to decide to make the grid lines in a site
Thank you so much sir.
First and foremost, great video. Like Jeff Bartels, you always make great content. I have one suggestion. Instead of using featurelines for the top face and top back of curb, use custom grading groups. I use custom grading groups to control the top face and top back of curb. If the elevations of the flow flowline change, the top face and back of curb change as well automatically.
James, thanks for the feedback. We used to advocate grading groups as well, but they are just so buggy, so many users won’t rely on them. And while it’s not shown in this video, we’ve actually created a tool call Auto Grader that’s a total game changer with site grading. It utilizes feature lines, but automates the creation and updating of them. Check out this recent webcast on using it in commercial sites: ua-cam.com/video/YDfdbZwilLU/v-deo.html
Here’s the a link to download a trial as well: www.ctcsoftware.com/product/cim-project-suite-2021/
Hello, great video... I am wondering if you could send me a file that will work with 3d civil 2015
How can I get in contact with you for more specific problems in Acad 3D
Just contact us via our website or phone and we'll get you connected to the right people. www.ctcsoftware.com
Very good video! Was it possible to download the file?
Hi Eirik,
If you post your email address either here or in a request email for the working files to marketing@ctcsoftware.com I can get the files to you. Hope that works!
@@CTCSoftware Amazing video, Can I get the file emailed to smhijazi96@gmail.com? Thank you
💜
HELLO SIR, THIS IS A GREAT TUTORIAL WITH A DESCRIPTION, SIR I WANT YOUR FILE TO DO PRACTICE
I saw your first 20-minutes or so and somewhat disagree. I partially use the feature lines and other grading tools, but still grade using polylines. I tried using just Civil-3D to grade an entire site, but when it comes to revising one simple grade line, it is much easier to move a polyline manually then trying to remember how I graded the site with Civil-3D tools. Way too complicated and is like trying to push a thumb-tak in the wall with a sledge hammer. Your detention basin grading example is more for an ideal site where you are unconstrained on all sides. Use a real example were you have wetlands (transition areas need tone considered) and are on a side of a hill and you need to use retaining walls. Civil-3D cannot handle it..... Just my opinion. I have been using Civil-3D since it came out and AutoCAD since the early 90's..
I have been finding that I feel much the same way. I am a relatively new engineer, but most of my training has involved using only Feature Lines, Grading Objects, etc. to grade sites, but it often seems to create more stress/headache/extra work.
Hello sir
If you enjoyed this video there is a newer tool called Auto Grader that we released that drastically improves Site Grading Workflows as well! More information can be found here: ctcsoftware.com/product/cim-project-suite-2021/#autoGrader
This is a dead link, has it moved?
#ahlesunnatahleimaan
I really want to like this video, but it's at 420
All kidding aside, I'm happy that feature lines are the primary tool being taught here, it was through frustration, trial and error, and error that I've discovered to do this, and I'm always wondering if I'm missing out big time.