It looks like you might be able to fit a panther tank inside the Stampede, with the breech inside the Stampede's jam door and the barrel emerging over the Demolisher's barrel - just an idea for a future project.
Coop you should get another Demolisher , Mod if , and remover the launcher and put a tactical rail in its place and put a thing on the too of the launcher so you can attach it to other guns
That looks pretty damn nice. A tac rail attachable missile launcher mod would be pretty cool too. Although the blaster had inductors on it's motors, not resistors, the ones Hasbro uses are so cheap they might as well be so they were definitely worth binning.
likeLatios Depends how you do it. Yes, the clip on official Nerf rail mounted accessories can be pretty weak, but there are some pretty sturdy third-party rail mounted accessories/adapters out there that clamp to the rail (a bit like a real picatinny attachment) rather than sliding on and off. You could also add a through-bolt to a standard Nerf rail clip or replace the torsion spring with a stronger one.
Hey there Coop, I will be painting my Firesrike and as your pro tip was to paint the inside of blasters, so I was wondering if I should put a matte clear coat on the inside or not. Can you help me out?
But you have all that space at the top of the blaster; perhaps it might be possible to integrate a Panther of sorts in to that space? - Like what you did with the 'Strypede' or have you already considered that, and realised it wouldn't work?
I don't think that would work. I never mod blasters myself but I can tell that the electronic, direct plunger would take up way more space than the smaller electric flywheel system that the Demolisher uses. Just my opinion but I'll let Coop decide that officially.
Hey Coop, can you take the demolisher launcher off and add a connecter. So you can add it to other blasters? I would love to see it. Cause i wanna take it off my 2 in 1
I keep wondering why nerf put a barrel attachment thing on the demolisher because when you use one it will make the missile touch the barrel when fired
Joe Diki a great sleeper is a modded stampede. New springs, higher voltage, basic stuff and it’s a wicked shooter. Modded for Stefans and it’s even better. Everyone knows the stampede is garbage stock.
Could yo do another one of these but a different paint job a long shot scope or pinpoint sight and no grenade launcher in the bottom with all the same internal mods please it would be really awesome. And if you use a pinpoint sight could you change the led color. It would be really cool!
Love the integratiom...but Ive noticed most of us modders have a color.we all fall back on like Dracs red my green metallic and your citadel blue. The blaster is awesome but the blue kinda looks almost like painters tape. Give us another color. Jus sayin
![[MOD] Nerf Stryfe + Stampede + Panther = Strypede](http://i.ytimg.com/vi/j95omwMB-XA/mqdefault.jpg)
![[MOD] Nerf Stryfe + Stampede + Panther = Strypede](/img/tr.png)
![[MOD] The Firestriker - Rapidstrike, Firefly, & Demolisher Launcher Integration](/img/n.gif)
It looks like you might be able to fit a panther tank inside the Stampede, with the breech inside the Stampede's jam door and the barrel emerging over the Demolisher's barrel - just an idea for a future project.
That thump from firing the missle launch gives me the willies in a good way
Hey coop you re mod videos are asome
that thing looks really sweet, the aesthetics are very well done :D i wish i had enough dough to commission you for a blaster like this
Nerf Titan series, designed by Coop779 - Number 2 in the series detected
*Really* nice shell!
A missle launcher on a Rayven?! HECK YES!!!!
I hope coop does a mod tutorial on the demolisher.
This looks freaking awesome! How are you so good at integrating?
this is awesome!! glad to see you want to put the missile launcher on other stuff. im curious to see what the demolisher looks like without it
looks like a rapidstrike with a bit of differences
A Stryfe with a banana clip?
He never put the missile launcher on any other gun
hey coop!
what do you think about the upcoming Nerf rhino fire.
when i saw it i totally nerdgazmed
yeah your back and beautiful gun, will you still be making modified guns for people
just asking?
Coop, you've reached the point where the only mod you can do is really intricate bad ass mods.
That looked flawless...
The integration I mean....
LittlePenguin ok........
Coop you should get another Demolisher , Mod if , and remover the launcher and put a tactical rail in its place and put a thing on the too of the launcher so you can attach it to other guns
That looks pretty damn nice. A tac rail attachable missile launcher mod would be pretty cool too.
Although the blaster had inductors on it's motors, not resistors, the ones Hasbro uses are so cheap they might as well be so they were definitely worth binning.
A tac rail attachable missile launcher mod would be realy hard to use.
Because if you pull back the "trigger" you would pull the launcher of the gun.
likeLatios Depends how you do it. Yes, the clip on official Nerf rail mounted accessories can be pretty weak, but there are some pretty sturdy third-party rail mounted accessories/adapters out there that clamp to the rail (a bit like a real picatinny attachment) rather than sliding on and off. You could also add a through-bolt to a standard Nerf rail clip or replace the torsion spring with a stronger one.
Tactical rail launcher video = (just yes + another yes)*infinity.
Does the stampede battery tray still hold things inside, or is it just a stock cap now?
Can you put a link in the description to where you bought the Trustfires?
Hey there Coop,
I will be painting my Firesrike and as your pro tip was to paint the inside of blasters, so I was wondering if I should put a matte clear coat on the inside or not. Can you help me out?
But you have all that space at the top of the blaster; perhaps it might be possible to integrate a Panther of sorts in to that space? - Like what you did with the 'Strypede' or have you already considered that, and realised it wouldn't work?
How many IMRs/trustfires/ultrafire would you advise for a demolisher? Oh and, do normal dead batteries work as dummy ones?
Always love your videos coop
That looks badass
Hey Coop, could you make a mod tutorial for this blaster? please and thank you:)
did the stampede shell have any internals in it? or waz it just a stock
Just stock, no internal functions.
You should make one with two launchers!
hey coop i found a stampede and i want to make it look like the mags goes in the back behind the handle can u do a video on that
How did you get so good at modding?
Coop would it be possible to take the mechanics of a Stampede with a voltage upgrade & battery change and put them into the shell of a Demolisher?
I don't think that would work. I never mod blasters myself but I can tell that the electronic, direct plunger would take up way more space than the smaller electric flywheel system that the Demolisher uses. Just my opinion but I'll let Coop decide that officially.
Mash stampede and stryfe internals together! Someone's got to do it!
if you don't hav teflon or electrical tape can you use duct tape for increasing an airseal
Wow, I don't know if that's funny or painful at 3:30. Looks cool, though.
Hey Coop, can you take the demolisher launcher off and add a connecter. So you can add it to other blasters? I would love to see it. Cause i wanna take it off my 2 in 1
you have to attach a connecter for a tac rail. and bolt it in or glue it.
the jamboree works right ?
HEy, why dont you attach a demolisher missile launcher to a tactical rail attachment, so that it can go to any blaster
Because the tri strike exist?
It didnt exist back then
I keep wondering why nerf put a barrel attachment thing on the demolisher because when you use one it will make the missile touch the barrel when fired
Looks awsome
Nice hair cut man
Are you sponsored by the makers of smooth cast 64D?
Coop plz reply why were u not at apoc
What is the mystery video ?
Coop try making a strongarm with an integrated nitefinder just for the lols
Coop what are u bringing to Apoc 2014 tommorw
No longer attending. I made an update on my Facebook about it.
Hi coop 772 I like what you did, I wish I had one
Can the the demolisher's missle lanucher shoot mega darts?
Yes... I thinl
Bob Gilbert No, the post is the same width as a mega dart.
The way Coop modded it, yes, but not stock
Joker'sShenanigans Still no. the post the missile goes on is the same width as a mega dart, so said dart won't fit in the hole
You should mod a Longshot and integrate a flywheel cage so that the gun is a sleeper gun
Joe Diki a great sleeper is a modded stampede. New springs, higher voltage, basic stuff and it’s a wicked shooter. Modded for Stefans and it’s even better. Everyone knows the stampede is garbage stock.
Awesome
Could yo do another one of these but a different paint job a long shot scope or pinpoint sight and no grenade launcher in the bottom with all the same internal mods please it would be really awesome. And if you use a pinpoint sight could you change the led color. It would be really cool!
you should call it demopede
Stephanie Shields YASSSS
Two days before my birthday 😄
Go u
Dude me too!
Congrats! Have a good Birthday! :D
Cool gun :D
Coop can you make a tutorial on this blaster
I have a demolisher and 3 stampedes. I’m totally doing this. An cutting off the missile launcher.
It's the Demolipede
your profile pic is perfect lol
Hey coop
I was wondering if youu could make a video for the original strypede?!?!?!?!?!?!
I already did. Search "Strypede" on my channel.
makc me a Nerf demolsher mod
Jenea S I
boss so cool but srypede is cooler and better though and do a long shot with a demolisher (with misile launcher) and ad a big shock or triad
Love the integratiom...but Ive noticed most of us modders have a color.we all fall back on like Dracs red my green metallic and your citadel blue. The blaster is awesome but the blue kinda looks almost like painters tape. Give us another color. Jus sayin
Pure nostalgia
How much you whant
Love it
For 100k subs you should do a give away for a custom gun
This came out today in the uk for nee
Demolisher came out more than a week ago. I was only able to get it today since Argos' systems is retarded.
stanmolisher??
Ok Thanks
I'm a airsoft guy this is awsome
this blaster is massive
The stanpolisher
Hi coop
why does the paint look really bad and weird :\
I don't really like it but that's the effect
Integrate a bbb with a blazin bow
how much money for nerf gun
Bobbi Hamilton depends on which one
Can I buy your valodf for 20$ !!?
No and even if he said yes it would be about $140. And don't forget the 99 cents.
The nerf soldier 76 pulse rifle.
It looks like EPG (titanfall)
Coop772 Call it the Demolipede or the Stampisher!!!!!!!!!!!!
God I want you to make me one of these, but I don't have any money....
Don't ask God. Either use good grammar or ask Coop :)
I usually have good grammar, I just misplaced a comma. :P
Holy shit that looks weird
Copp please do mods os thunderbow
#420
Lol modded demolisher fps = stock covert ops scorpion fps
Fourth
150th view
third comment wooo
How much is one of those
Pretty much 324 dollars.
No way
Yes it is. Labor+ materials and parts= around $300-400
Lol I gaterd that