My therapist says I should tell people more how I feel then I usually do. I guess . I never comment on anything because I think it’s lame but i guess I Midas we’ll do it too ! Here we go . Ready? This video has Been very helpful to me and I agree no bs like others just straight to it! There I said it. Thank you. LOL!
Was all that really necessary? I mean, did they tell you to tell everyone all that as well before telling them. Maybe just tell people what you think without all that. It sounds a bit weird to have someone just come at you like that. It's kinda like the turn around and run away flag lol. I wouldn't lead with that if I were you.
So what you are saying is that I’ve been rinsing my sand filter for a week. Thank you so much for your video. Luckily the pump is ok. Once I put it to run I had really good flow. Thank you thank you thank you
This was great! I understand that they sell internationally and so pictures may be best but I like more detailed instructions. Also, there was not skimmer for my pool. I assume that is why there are to ports marker B. I hope someone can respond quickly - hot days ahead! Thanks so much, Dale, for taking the time to make this video
Going outside in the next couple of minutes to setup our pump with your excellent guide - first time I'm ever starting up a pump, never done it, never had a pool before! 😋
Thank you!!!! Our new pool came with this pump but no instruction manual.🤦🏼♀️ Your instructional video for setting it up along with this video were the only ones on YT that I was able to follow. Now I feel much more confident about maintaining my pool! You rock!
Just found your channel after installing ours, How often do you throw chlorine tablets in it etc And how often do you shock it? You should do a video on your regular routine etc :) would be helpful Thank you very much for this video Was tons of help
Which setting should I be on if I want to vacuum the pool? Also, should I connect the vacuum to the inlet inside the pool for suction? I don't have a skimmer basket or t adapter hose
Thank you so much for the great instructions. It was easy to follow and I appreciate it so much the instructions that were given with the pool horrible, so thank you in advance.
Thank you. That was super helpful. I was out there today and noticed gunk in the little clear trap. How do I open that without water spraying everywhere? My last pool had shut off valves. This doesn't.
Use the normal filter setting so you are filtering what you vacuum up. Then when you finish vacuuming that's a good time to do a 1 minute backwash and 30 second rince cycle.
Great video very informative but you should probably give people a warning before they just turn the backwash setting on cuz I’m drenched in water now lol
I didn’t get an instruction manual with my new pump. I was , am nervous about using it properly. Thank you. I would like to see how I fit a vacuum hose up next to clean the bottom of my pool please
Thank you so much!!! Could you also do a short video on how you have the hoses run from the pool through the solar heater and to the pump and filter? That would be a huge help.
Hello I just got an above ground pool without your videos i would have been lost setting up my filter system. I do have a question how do I get water to filter back into the pool.
Do I need to backwash when I put new pollysphere balls in? My pool has never been so dirty since getting a pool with this filter. I can’t figure it out.
Great vid! So, I did not backwash after putting new sand in the filter and now there’s a bit of a cloud that settles to the bottom of the pool, I have used filter fiber and clarifier, but it’s not getting it out, any suggestions??
My question is on this same model 58498E - In regards to the strainer basket, is there supposed to be a cartridge filter that fits in there for extra filtering or is it simply a catch basket for larger debris? If a filter cartridge is optional, which one? - Thanks!
I would like to know what setting you keep the pump running at to open the strainer basket and empty it? Also, how do you check the filter to see what level your sand is at and if it needs more?
@@FIGHTOLOGIST1982 I have two plugs but no instructions on how to put them on or what area they go onto. I tried at the T connection to both B's and it won't plug that so where do the plugs go?
@Victoria-lx7uc so those two plugs go into the B ports on the inside of the pool. You will need to loosen the clamps on the outside and remove the filter protectors and replace them with the plugs.
Hi mate, great video. Very informative thank you! One question, what PSI should the pump be sitting at? Mine doesn't seem to go above 4 PSI...??? Cheers
Before hooking up the solar pad, I noted that the filter pressure was approximately 4.2 and the instruction manual said it should be under 4.5. After connecting solar pad, the pressure gauge went up to 6.1. Should I now assume that the new threshold for back wash and rinse is 6.4 or over?
Mine ran at about the same psi as yours for both without and with the solar heater. I took the solar heater out as I’m in Las Vegas the sun alone has been enough. Hope all is well.
Hi thanks for the videos very informative. I have my best way pool setup with the thermal panel. The gauge on my filter reads at nine psi and I tried searching what it Hass to be and I seen I have to be below 6.5 psi. I tried backwashing and rinse but still did not work.
Kia ora! from Aotearoa (New Zealand) The Man!! Kai Pai (well done)Tēnā koe (thank you) for this simple easy setup, will defiantly be watching this video when setting up, Will like and subscribe as I know ill be needing your help on there tips and tricks! Ka kite ka kite anō (Goodbye see you later)
Hii! Setting up Pool for the first time. Can you cover how to do electrical part? Can we use an extension cord to an outdoor outlet? I’ve seen other people install a plug by the pool? O_o not sure what to do here :(
Okay I left a comment on which one would be used for waste on this pump. I think drain would be the one to use if you're vacuuming flocculant and dead algae up, right?
I can’t get my tank closed with the rubber ring on. The two outer rings will not fit over the tank no matter what I do. They hardly fit with the ring off. Any ideas of what I can do? Thanks!
I've snapped two, looking to get a smaller rubber ring, thinking it's a manufacturing flaw from all the recent comments I'm seeing we're not the only ones having issue.
I just had my first experiences with this FlowClear pumpfilterset and what occured to me immediately as annoying, is that there is no way to stop the water from the inlet hose on the pump, to be able to simply take out the inlet filter if you want to clean it! The set in general is good quality and nice to use. The timer on the motor is for me not very interesting, because we need to focus on cheap hours of electricity and daylight (solar panels) which can only be in sync with switching to 24h operation on the pump and an external timer.
@brendabuchanan1975 Thanks for responding, indeed that would be the simplest solution, only in my case plugging the water inlet is not possible, out of reach! So I bought a set of 38mm plastic valves. Which added another 50€ to the installation.
Great video. Last year was first year with this bestway pool. I stored the filter (full of sand) indoors for the winter. Can I use that same sand this year or should I try to dump it out and use fresh sand for this season. Thanks
Product is easy to install and kept the pool warmer than it had usually been. Extended the use of the pool by a month or so. Great value!
My therapist says I should tell people more how I feel then I usually do. I guess . I never comment on anything because I think it’s lame but i guess I Midas we’ll do it too !
Here we go . Ready?
This video has Been very helpful to me and I agree no bs like others just straight to it!
There I said it.
Thank you.
LOL!
Thank you!
Was all that really necessary? I mean, did they tell you to tell everyone all that as well before telling them. Maybe just tell people what you think without all that. It sounds a bit weird to have someone just come at you like that. It's kinda like the turn around and run away flag lol. I wouldn't lead with that if I were you.
You made this way easier than reading the directions! Thank you! Very very hepful!
So what you are saying is that I’ve been rinsing my sand filter for a week.
Thank you so much for your video. Luckily the pump is ok. Once I put it to run I had really good flow. Thank you thank you thank you
This was great! I understand that they sell internationally and so pictures may be best but I like more detailed instructions. Also, there was not skimmer for my pool. I assume that is why there are to ports marker B. I hope someone can respond quickly - hot days ahead! Thanks so much, Dale, for taking the time to make this video
Going outside in the next couple of minutes to setup our pump with your excellent guide - first time I'm ever starting up a pump, never done it, never had a pool before! 😋
Sharpie makes an outdoor marker that you could label those icons with until you’ve got them memorized.it lasts a while in the sun.
Thank you!!!! Our new pool came with this pump but no instruction manual.🤦🏼♀️ Your instructional video for setting it up along with this video were the only ones on YT that I was able to follow. Now I feel much more confident about maintaining my pool! You rock!
Thank you! Glad it helped
Just found your channel after installing ours,
How often do you throw chlorine tablets in it etc
And how often do you shock it? You should do a video on your regular routine etc :) would be helpful
Thank you very much for this video
Was tons of help
Where do the chlorine tablets go?
@@josesolis3252 you need to buy a chlorine floater
@@danatorres2184 Thanks! I did purchase one and has helped alot.
Which setting should I be on if I want to vacuum the pool? Also, should I connect the vacuum to the inlet inside the pool for suction? I don't have a skimmer basket or t adapter hose
Thank you so much for the great instructions. It was easy to follow and I appreciate it so much the instructions that were given with the pool horrible, so thank you in advance.
Do you have to back wash the filtration spheres too, if you using them instead of the sand media. ?
No. You need to take them out and rinse them off
Thank you. That was super helpful. I was out there today and noticed gunk in the little clear trap. How do I open that without water spraying everywhere? My last pool had shut off valves. This doesn't.
DO NOT try and “let the air out” by loosing the lid of the filter. Just learned that the hard way
I approve this message, I made this mistake as well. Almost undoable
The one with the hieroglyphics? How did you take that off?!!
LOL NO THIS MADE ME LOL BC I DID THIS 😂😂😂😂
I wish I read this first, before letting the air out by loosening it
I just did it for the 2nd year in a row… Im so dumb lol
This video was such a great help from beginning to the end of the pool setup! Thank you!!
What setting do you use for when your vacuuming?
I'm also wondering same thing
Use the normal filter setting so you are filtering what you vacuum up. Then when you finish vacuuming that's a good time to do a 1 minute backwash and 30 second rince cycle.
I would assume Drain if you’re hooking the vacuum up to where the suction is
Best video to show how to get this pump working, tank you !
Thank you so much! I watched this last year as it was my first year ever owning and operating a pool, and this year as a refresher 😊
Thanks so much! Looked and looked for a diagram or explanation for all those filter controls and couldn't find anything until I found your video.
Great video very informative but you should probably give people a warning before they just turn the backwash setting on cuz I’m drenched in water now lol
im new to the filter pump system this video helped me alot thank you
Thank you for the video! But when do you lock or unlock the A port? Thanks
I'm new to using a sand filter and found this very helpful, thank you!
I didn’t get an instruction manual with my new pump. I was , am nervous about using it properly. Thank you. I would like to see how I fit a vacuum hose up next to clean the bottom of my pool please
Thank you so much!!! Could you also do a short video on how you have the hoses run from the pool through the solar heater and to the pump and filter? That would be a huge help.
Ok
S
Thank you so much!!! Those instructional images had me very confused.
Hieroglyphics for sure. Thanks man! Adding a Hayward skimmer today and needed a refresher. That drain feature is awesome will for sure help.
What should the pressure gage read when starting the pump for the first time? Thank you
Hello I just got an above ground pool without your videos i would have been lost setting up my filter system. I do have a question how do I get water to filter back into the pool.
Is there a video on how and when to change the sand on this pump/filter? If not, could you make one, please? Excellent video. Thank you
Great information. Thank you. Why is water coming out from top of filter.
Do I need to backwash when I put new pollysphere balls in? My pool has never been so dirty since getting a pool with this filter. I can’t figure it out.
I have a best way pool and have the exact filter. How often do I change the sand? I can't find any info on that?
The best explanation!
Felt so lost until now, thank you! How long do i backwash for?
Until the water starts to clear up. Only takes a minute or 2
If I wanted to vacuumed the pool what setting would I use?
Thank you! Really helped me out.
Would the circulate be the best for the solar heater? On the normal play setting the flow is much lower than without the solar heater.
Great vid! So, I did not backwash after putting new sand in the filter and now there’s a bit of a cloud that settles to the bottom of the pool, I have used filter fiber and clarifier, but it’s not getting it out, any suggestions??
Hello if I wanted to vaccine the pool what setting would I use ?
How do you vacuum to waste? Which setting should it be on?
You ever figure out the answer?
My question is on this same model 58498E - In regards to the strainer basket, is there supposed to be a cartridge filter that fits in there for extra filtering or is it simply a catch basket for larger debris? If a filter cartridge is optional, which one? - Thanks!
How do you clean the strainer without looking water from the pool? From the two hoses that labeled B in the manual?
Lets say I want to replace this system...HOW do I block off the water going to the two hoses that feed the pump?
Thanks for the help, Kicki in Sweden.
What are you plugging your pump into? Gcfi extension cord? Any waterproof covers for connectors? Thanks.
Thank you so much I really appreciate this video it helped that you dummied it down for me
Going over the symbols were very helpful
Love the video!! Please help us!! Lol When in the Play setting, my pump doesn't move or circulate very fast. Is that normal?
I would like to know what setting you keep the pump running at to open the strainer basket and empty it? Also, how do you check the filter to see what level your sand is at and if it needs more?
Close setting or the "X" also..plug your B ports before doing so or water will continue to flow
@@FIGHTOLOGIST1982how do I plug the B port???
@Victoria-lx7uc your pool should have came with two ports. If not they can easily be bought at home depot or lows even online
@@FIGHTOLOGIST1982 I have two plugs but no instructions on how to put them on or what area they go onto. I tried at the T connection to both B's and it won't plug that so where do the plugs go?
@Victoria-lx7uc so those two plugs go into the B ports on the inside of the pool. You will need to loosen the clamps on the outside and remove the filter protectors and replace them with the plugs.
Hi mate, great video. Very informative thank you! One question, what PSI should the pump be sitting at? Mine doesn't seem to go above 4 PSI...???
Cheers
What pressure are peoples pumps running at ? Thank you for your help.
YESSSS!!!! I’ve been looking for this video all day
Do we need to do all these steps Everytime or only when adding sand and first time using filter?
Before hooking up the solar pad, I noted that the filter pressure was approximately 4.2 and the instruction manual said it should be under 4.5. After connecting solar pad, the pressure gauge went up to 6.1. Should I now assume that the new threshold for back wash and rinse is 6.4 or over?
Mine ran at about the same psi as yours for both without and with the solar heater. I took the solar heater out as I’m in Las Vegas the sun alone has been enough. Hope all is well.
Which setting do you put it on to vacuum to waste??? This is the exact pump that I have.
Great video ! I really appreciate the thorough explanations
Is this the same if using the filter balls?
Very helpful brother and thank you!
Thank you! This was awesome! No messing about just straight to the point!
Thanks, buddy. Both videos super helpful!
Dale do you have any videos on problems with this sand filter leaking? Mine is at the top where the function piece is screwed in
Hi thanks for the videos very informative. I have my best way pool setup with the thermal panel. The gauge on my filter reads at nine psi and I tried searching what it Hass to be and I seen I have to be below 6.5 psi. I tried backwashing and rinse but still did not work.
very helpful thanks!
I'm having pressure issues. Should I have backwashed if I'm not using sand?
THANKS SO MUCH! This has been so helpful! 😅
Where do you live, wondering about the chemicals when you said in another video what was perfect for where you live. Thanks.
Thank you 🙏
Best explanation video!!
Amazing video! Thank you so much! May I ask how often do you do this process? Is it done daily or weekly?
About once a week
Im house sitting for my mom and noticed hers was pushing air so i turned it off. Can i just prime it with pool water and restart the pump?
You helped us very much thak you so much❤😊
Does the heater also work while it’s on the play button ▶️
So would you recommend shutting off the pool at night time, right??? And only leaving the pool running when you use it?
What setting do I use for waste when I am vacuuming the pool out?
What the normal PSI when using this pump? Thanks
Kia ora! from Aotearoa (New Zealand) The Man!! Kai Pai (well done)Tēnā koe (thank you) for this simple easy setup, will defiantly be watching this video when setting up, Will like and subscribe as I know ill be needing your help on there tips and tricks! Ka kite ka kite anō (Goodbye see you later)
I have a best way pump with the same symbols on the filter. Which setting do I use to vacuum to waste?
Any idea how to replace the locking ring that you screw on to seal the pump. Snapped while screwing it on
Can you post a link for that pump and filter and the solar heating
When you turn the pump off do you change any of the settings or just turn the switch off?
Where do you get your end caps, like what you used to block off the solar panel?
Hii! Setting up Pool for the first time. Can you cover how to do electrical part? Can we use an extension cord to an outdoor outlet? I’ve seen other people install a plug by the pool? O_o not sure what to do here :(
Would help to show how pump is used with filter balls. Also, provide a printout sheet of symbols, meanings, and when to use.
Okay I left a comment on which one would be used for waste on this pump. I think drain would be the one to use if you're vacuuming flocculant and dead algae up, right?
Yes. Drain doesn’t send water back to pool
can you make a video where you dismantle the Bestway Pool Filter and change the sand? @dad stuff
I can’t get my tank closed with the rubber ring on. The two outer rings will not fit over the tank no matter what I do. They hardly fit with the ring off. Any ideas of what I can do? Thanks!
I've snapped two, looking to get a smaller rubber ring, thinking it's a manufacturing flaw from all the recent comments I'm seeing we're not the only ones having issue.
Been to multiple hardware stores and nothing... about to try silicone inside of ring...
Thank you for this great information
How do you connect the “B” hoses to the pool liner. My connection is not secure. Maybe missing a part
Thank you so much! I misplaced my manual.
Thank you it help me a lot
What kind of sand do you use did you have a blue / grey film in bottom of pool from pump
Thank you for the video! Just got a new pool and this type of pump, and the instructions have been lost. 😅😅😅
Very informative!
Would these be the same steps if use the polyshere washable balls instead of sand
Also want to know. Nothing in manual about it.
Which setting do we use for vacuuming the pool?
Did I should have my filter running 24 hours?
Where should pressure gauge be? Mine is around 0.2 is that normal?
I just had my first experiences with this FlowClear pumpfilterset and what occured to me immediately as annoying, is that there is no way to stop the water from the inlet hose on the pump, to be able to simply take out the inlet filter if you want to clean it!
The set in general is good quality and nice to use. The timer on the motor is for me not very interesting, because we need to focus on cheap hours of electricity and daylight (solar panels) which can only be in sync with switching to 24h operation on the pump and an external timer.
You have to plug the ports and turn the valve off, the only water coming out shouldn't be much around filter.
@brendabuchanan1975 Thanks for responding, indeed that would be the simplest solution, only in my case plugging the water inlet is not possible, out of reach! So I bought a set of 38mm plastic valves. Which added another 50€ to the installation.
Would I use the drain setting to vacuum to waste?
You could, but it’s designed to vacuum on regular filter setting
Good question? Let me know
@dalesbackyardofficial mine on regular filter setting isn't getting all the dead algea or super fine particles what do you suggest??
Do you need to close your intake hoses before back washing ?
Great video. Last year was first year with this bestway pool. I stored the filter (full of sand) indoors for the winter. Can I use that same sand this year or should I try to dump it out and use fresh sand for this season. Thanks
I reuse it. Seems to work fine
@@dalesbackyardofficial Can I ask you a question about the solar pad you are using. What are the dimensions of the pad itself. Thanks
The flange clip on mine broke and I can’t find a replacement. Any recommendations?!??