Hi there Rocio, The IO-Link master discussed in the video is of type ICE1….www.pepperl-fuchs.com/usa/en/4507.htm?searchterm=ice1-8iol&start=0&rows=10&modifier=beginswith Unfortunately, these do not work well with a MicroLogix PLC. However, we have a model ICE2… www.pepperl-fuchs.com/usa/en/4507.htm?searchterm=ice2&start=0&rows=10&modifier=beginswith that has read/write to file functionality that will work nicely with the MicroLogx PLC and RSLogix 500. All you have to do is make the file (Example N55) where you want the data to go or be pulled from and the IO-Link master will put or pull it from there. Please reach out to Ask an Expert if you have further questions by clicking the link here: www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm Thank you.
we have problems to config ICE2-8IOL-K45P-RJ45 with control logix, adding EDS, the values that we get are random, without sense . If we saw the process data of the sensor in the browser (adding the IODD), the values are correct. please could you check the information shared of that model if is correct.
Hello Diego PM, we're here to help. Our customer service agents and technical support specialists are ready to answer your questions and help you get the information you need. Please fill out our Ask an Expert form by clicking this link here: www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm
Hi there Marco, that’s correct. If you look up your gateway on our website, available GSD files can be found under the software tab. Hope this helps. Thank you.
Hello Clint, We do have an EDS AOP, but will not be releasing a true AOP. Please reach out to technical service www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm and we’d be happy to discuss more. Thank you!
Hi there Juan. Yes you can change the address of the Block I/O (ICE1) by going to the network settings of the web interface of your Ethernet module. The last octet should be matching your dial settings. If you have further questions please feel free to contact us at ask@us.pepperl-fuchs.com. Thank you.
Can I sign in the same steps to communicate IO-Link Master into RSLogix 500 or plc micrologix 1400?
Hi there Rocio,
The IO-Link master discussed in the video is of type ICE1….www.pepperl-fuchs.com/usa/en/4507.htm?searchterm=ice1-8iol&start=0&rows=10&modifier=beginswith
Unfortunately, these do not work well with a MicroLogix PLC. However, we have a model ICE2… www.pepperl-fuchs.com/usa/en/4507.htm?searchterm=ice2&start=0&rows=10&modifier=beginswith that has read/write to file functionality that will work nicely with the MicroLogx PLC and RSLogix 500. All you have to do is make the file (Example N55) where you want the data to go or be pulled from and the IO-Link master will put or pull it from there.
Please reach out to Ask an Expert if you have further questions by clicking the link here: www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm
Thank you.
When i tray to add this module in RsLogix 5000 v20, the app crashes, somebody have an old EDS file?
we have problems to config ICE2-8IOL-K45P-RJ45 with control logix, adding EDS, the values that we get are random, without sense .
If we saw the process data of the sensor in the browser (adding the IODD), the values are correct.
please could you check the information shared of that model if is correct.
Hello Diego PM, we're here to help. Our customer service agents and technical support specialists are ready to answer your questions and help you get the information you need.
Please fill out our Ask an Expert form by clicking this link here:
www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm
Can you do the same on siemens PLC? I suppose you have to use GSD file instead EDS.
Hi there Marco, that’s correct. If you look up your gateway on our website, available GSD files can be found under the software tab. Hope this helps.
Thank you.
Will there ever be a AOP released?
Hello Clint, We do have an EDS AOP, but will not be releasing a true AOP. Please reach out to technical service www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm and we’d be happy to discuss more. Thank you!
could I set a different IP address for the BK IO as 10.xxx.xx.xx
Hi there Juan. Yes you can change the address of the Block I/O (ICE1) by going to the network settings of the web interface of your Ethernet module. The last octet should be matching your dial settings. If you have further questions please feel free to contact us at ask@us.pepperl-fuchs.com.
Thank you.