Hi Michael, the only thing I know is that it's best to unplug it and then switch to analogue. Analogue being the switch set to be closest to the track if that makes sense. If it still feels like its kind of intermittent then check the braids on the car 😁
@@trackfanstv Thanks. Just need to get another controller. They are sold out everywhere. My plan is to eventually get up to 6 controllers but 3 would be perfect right now. With only 2 controllers I’m hoping to run two slowish pace cars at a staggered start, to practice passing. Not even sure if I can run more than one pace car.
Do i need to take out lane change tracks and pit lane from my layout when switching to analog mode using ArcPro? I read from Scalextric website that Digital tracks running analog should not have any lane change or pit lanne tracks on its layout as it will cause short circuit… Thanks
Hi mate, you can use the track in both modes using any digital travk👍🏻. I often use both modes because we have 4 digital chips and a lot more cars so, sometimes when we just want to race, we'll flick the switch to analogue rather than changing the chips 💪🏻🤘🏻
Hi buddy, yes analogue. For those who don't know, on an arc pro you have a switch on the left of the module as you look at it when connected to the track and push the small button forwards toward the track.
Just to add info I have now got the analogue setup working. Couple of things to note. 1/ you don't have to have the app running to use arcpro in analogue mode, but of course the app will give added features like lap counting and lap time. 2/ in analogue mode you need to have the two controllers assigned to the first two channels on the powerbase. (These seem to be the channels that feed analogue power)
@@Bagpuss109 👌🏻 I noticed I didn't answer about the App, so sorry chap but you seem to have figured it out. I'll be honest, being of an age I wouldn't have thought to see if the App worked on analogue but now you mention this I'll be counting lap times later! Great shout, thanks ledge 🤘🏻😎
Lovely , well done , loved it awesome
Good Cars!! 👏👏
Love that track layout! I'm going to have to give it a try.
I recently got my ARC PRO, i struggle to get the analogue to work. Is there a trick to it?
Hi Michael, the only thing I know is that it's best to unplug it and then switch to analogue. Analogue being the switch set to be closest to the track if that makes sense. If it still feels like its kind of intermittent then check the braids on the car 😁
@@trackfanstv I tried that and it worked. Thanks. I got 4 more digital chips yesterday so I should be analogue free from now one. :)
Amazing, nice one bud........ have some awesome lane changing mayhem with you and your lads, enjoy! 😎
@@trackfanstv Thanks. Just need to get another controller. They are sold out everywhere. My plan is to eventually get up to 6 controllers but 3 would be perfect right now.
With only 2 controllers I’m hoping to run two slowish pace cars at a staggered start, to practice passing. Not even sure if I can run more than one pace car.
Do i need to take out lane change tracks and pit lane from my layout when switching to analog mode using ArcPro? I read from Scalextric website that Digital tracks running analog should not have any lane change or pit lanne tracks on its layout as it will cause short circuit… Thanks
Hi mate, you can use the track in both modes using any digital travk👍🏻. I often use both modes because we have 4 digital chips and a lot more cars so, sometimes when we just want to race, we'll flick the switch to analogue rather than changing the chips 💪🏻🤘🏻
Do you have to have the app running to use analogue mode ?
Hi buddy, yes analogue. For those who don't know, on an arc pro you have a switch on the left of the module as you look at it when connected to the track and push the small button forwards toward the track.
Cheers 😎
Just to add info I have now got the analogue setup working. Couple of things to note.
1/ you don't have to have the app running to use arcpro in analogue mode, but of course the app will give added features like lap counting and lap time.
2/ in analogue mode you need to have the two controllers assigned to the first two channels on the powerbase. (These seem to be the channels that feed analogue power)
@@Bagpuss109 👌🏻 I noticed I didn't answer about the App, so sorry chap but you seem to have figured it out. I'll be honest, being of an age I wouldn't have thought to see if the App worked on analogue but now you mention this I'll be counting lap times later! Great shout, thanks ledge 🤘🏻😎
@@trackfanstv didn’t know that. Thanks I’ll try it out today.