When I built my shop, I made one mistake that has been a thorn in my side for 30+ years. Do NOT build workbenches along the walls! You need to be able to access and work from all sides of a project. My favorites are set on troll cab bases with steel or wood tops. A good friend found this in some old publication on how to set up a shop. Wish I had found this out before I put benches along two walls. I really like the Stanley Vidmar boxes, with the 25" square drawers. You can interchange drawers and put them in any order you like. They're not cheap even used, but the versatility is outstanding. As someone else stated, put everything you can on casters. Swivel on one end and straight on the other. They should all be locking. If you ever get it perfect, then bolt them down! You might want to try some grey color on the hair. Mine's white but I earned every strand😁😁😁😁😁😁
I've had good luck using PC-7 epoxy to repair steering wheels. It seems to have the same expansion/contraction characteristics as the original wheel, so cracks won't reappear. I don't know if it's available in Australia but I've found it at my local hardware store here in the States. Also, cleaning out the cracks can be done with a small triangular file and/or a selection of small riffler files, for those people who don''t have a Dremel or hand grinder.
@@bennettscustomsco I just checked, and PC-7 does appear to be available on Amazon in Australia. I didn't dig any further to see if it's carried in the local hardware stores. It's a useful product to have around the shop, it can be used for a lot of other things besides steering wheels. Steering wheels can be a little tricky to work on since they have a lot of inside curves and recesses and finger notches in the rim and things, it can be tedious to get the patches leveled out so they won't be noticeable after painting. I think I had to use every file, grinder, and sandpaper I had on hand before I was satisfied with mine. 🙂 Thanks for your channel, by the way - you do a good job of showing the process of fabrication, and I appreciate your creativity and design style.
Every project I've sold was later deeply regretted. Happy New Year mate, may it bring you nothing but the best. Edit: the wheel looks better than factory! Nice.
Espectacular tu trabajo !!! Me encanta y siempre espero ver tus avances y obviamente que la familia está primero....saludos desde buenos aires , argentina ....para cuándo te vas a armar un y-block con buenos fierros australianos? Acá somos fans del y-block el único v8 de producción nacional en su momento
Nice trip back, remember watching this and getting some really good information (never thought to grind open the cracks)! Looking forward to another year of great content, builds, and tutorials! Go Bennetts Customs and family, keep moving forward!
Keep looking after your family Jordan there special. I tried to bring back a 40s ford steering wheel from the early ford store about 5 years ago and came home with a repo. Never the same but if ever I do come across one I can always change it. It would be disappointing to loose your roadster now. All the best for 2025 to you and the crew. You’ll figure out your work stations when you start working again. Cheer 🍻Tim.
wow, was a little concerned you lost a bet with that surfer dude hair bud! Nice job on the steering wheel. Put casters on everything you can in the shop. You'll be moving stuff around for years!
Great video, cool flashback with the steering wheel...was worried at first that the shop move was so stressful your hair had turned grey. Yeah, I'm not grey haired, mine's turning matte chrome hahaha Have a great 2025, thanks for sharing your work online
I've heard of people using a mixture of baking soda and super glue instead of bondo. I've not tried it myself so I can't say if it works or not. But I do have a old wheel that's cracked sooo...
Hope you don’t have to give up on your dream car! I know sometimes that has to happen but you will regret that decision and it will eat at your soul, I speak from experience.
Hey mate, what is making you feel like you have to sell your roadster? You seem a bit burnt out, I run my own business also and know the feeling. Hope all is well ✌🏻
@ sorry to hear that legend, I know the UA-cam algorithm is a cruel mistress and you have to keep up the posting frequency but I’m sure all of your subscribers would totally understand if you needed to take time off ✌🏻
When I built my shop, I made one mistake that has been a thorn in my side for 30+ years. Do NOT build workbenches along the walls! You need to be able to access and work from all sides of a project. My favorites are set on troll cab bases with steel or wood tops. A good friend found this in some old publication on how to set up a shop. Wish I had found this out before I put benches along two walls.
I really like the Stanley Vidmar boxes, with the 25" square drawers. You can interchange drawers and put them in any order you like. They're not cheap even used, but the versatility is outstanding.
As someone else stated, put everything you can on casters. Swivel on one end and straight on the other. They should all be locking. If you ever get it perfect, then bolt them down!
You might want to try some grey color on the hair. Mine's white but I earned every strand😁😁😁😁😁😁
Wishing you / your family / team THE VERY BEST .. health/happiness / prosperity in the new year .. congrats on the new shop .. CHEERS from Québec 🇨🇦
Cheers to you too! Happy New Year from us!
Looks almost as good as if had just come from the factory. Well Done!!!
Island benches will be your friend, access to the work from all sides. Happy NY
Nice Work. Looks Great.
Happy new year to you all . Thanks for all the great videos this last year.
Happy new year!
Thanks for sharing, all the best to you and your loved ones, wishing yous a Healthy and Prosperous New Year
Right back at ya!m Don!
look at the new hair on this guy! new year new me, happy new year
Happy new year guys, all the best in the new shop, truly hope you get to hang on to your old project buddy
Happy New Year! Much success to you!
Oh... and Happy New Year!
Useful basic tutorial. Good luck in the new shop!
I've had good luck using PC-7 epoxy to repair steering wheels. It seems to have the same expansion/contraction characteristics as the original wheel, so cracks won't reappear. I don't know if it's available in Australia but I've found it at my local hardware store here in the States. Also, cleaning out the cracks can be done with a small triangular file and/or a selection of small riffler files, for those people who don''t have a Dremel or hand grinder.
Great advice! Thanks for sharing Stu! Spot on with the files too. I’ll be searching for that epoxy!
@@bennettscustomsco I just checked, and PC-7 does appear to be available on Amazon in Australia. I didn't dig any further to see if it's carried in the local hardware stores. It's a useful product to have around the shop, it can be used for a lot of other things besides steering wheels.
Steering wheels can be a little tricky to work on since they have a lot of inside curves and recesses and finger notches in the rim and things, it can be tedious to get the patches leveled out so they won't be noticeable after painting. I think I had to use every file, grinder, and sandpaper I had on hand before I was satisfied with mine. 🙂
Thanks for your channel, by the way - you do a good job of showing the process of fabrication, and I appreciate your creativity and design style.
Nice work on the steering wheel! 👍👍
Happy New Year!
Happy New Year to you too!
Yeah that was one of my favorite videos! Hope you don't have to sell your roadster!! Wishing you and the guys a great 2025!
Absolutely clean restore on the wheel! Happy New Year
Happy New Year to you too!
Every project I've sold was later deeply regretted. Happy New Year mate, may it bring you nothing but the best. Edit: the wheel looks better than factory! Nice.
Espectacular tu trabajo !!! Me encanta y siempre espero ver tus avances y obviamente que la familia está primero....saludos desde buenos aires , argentina ....para cuándo te vas a armar un y-block con buenos fierros australianos? Acá somos fans del y-block el único v8 de producción nacional en su momento
Nice trip back, remember watching this and getting some really good information (never thought to grind open the cracks)! Looking forward to another year of great content, builds, and tutorials! Go Bennetts Customs and family, keep moving forward!
Appreciate it, we're excited for what's to come in the shop too!
Keep looking after your family Jordan there special. I tried to bring back a 40s ford steering wheel from the early ford store about 5 years ago and came home with a repo. Never the same but if ever I do come across one I can always change it. It would be disappointing to loose your roadster now. All the best for 2025 to you and the crew. You’ll figure out your work stations when you start working again. Cheer 🍻Tim.
Thanks Tim! Much appreciated
That's come up lovely.👍
Beutiful job Justin looks mint buddy , Happy new year to you and your staff 😎😎🤘🤘
Cheers! Happy New Year to you too!
wow, was a little concerned you lost a bet with that surfer dude hair bud! Nice job on the steering wheel. Put casters on everything you can in the shop. You'll be moving stuff around for years!
Haha yeah died it and my beard for a Santa costume. Yeah good call everything on wheels!
great restoration ! Happy New year.
Great way to start my day! It must be Bennett's Customs, because he's too tall to be Guy Fieri...
Hahahha
Happy new year. in french😘
Happy new year!!
Happy New Year fellas!
Cool video. That radiator cover on the wall at 1:00 mark though… very… sexy!
All in good taste 😂
Great video, cool flashback with the steering wheel...was worried at first that the shop move was so stressful your hair had turned grey.
Yeah, I'm not grey haired, mine's turning matte chrome hahaha
Have a great 2025, thanks for sharing your work online
Vou dar uma olhada, parece muito bom
I've heard of people using a mixture of baking soda and super glue instead of bondo. I've not tried it myself so I can't say if it works or not. But I do have a old wheel that's cracked sooo...
I haven’t tried that combo but it’s interesting for sure!
Hope you don’t have to give up on your dream car! I know sometimes that has to happen but you will regret that decision and it will eat at your soul, I speak from experience.
What’s the 3 side door hood off of on your roadster!
‘34 Austin 16- took me ages to find out
Don't sell the project!!! You know you'll have to replace it again!
Did you put your finger in a elec. socket ?
Is no body talking about the image in the middle of the grill on the wall !
Ford/Mercury what's the diff.😁
Hey mate, what is making you feel like you have to sell your roadster? You seem a bit burnt out, I run my own business also and know the feeling. Hope all is well ✌🏻
Definitely burnt out to say the least.
@ sorry to hear that legend, I know the UA-cam algorithm is a cruel mistress and you have to keep up the posting frequency but I’m sure all of your subscribers would totally understand if you needed to take time off ✌🏻
Crazy man white hair.Australian gay.
Remains of a Santa costume!
Did you lose a bet because of your HAIR COLOUR.😂😂😂😂😂😂
Sorry , that's wasn't very nice.
Lol.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
I grew it and my beard and died it white as a Santa Costume. This was the remains hahaha😂
The wheel came out nice. Thanks for the tips .Good luck with the new year and the new shop! Thanks
Oh man really.the hair is bad bro.
It sure was!