Thank you very much you were very helpful
You help me a lot, thanks !! I own a 2011 Tiguan 2.0 Turbo.
Thanks u my friend
U help me so much
Thanks man... i did it on Passat B6 and it works 👍
Do you need the full version of vcds and the expensive cable or can it be done with vcds lite?
Thanks
Very very beautiful video. Thank you for this video . ❤❤❤❤❤❤❤👍👍👍
Hello golf Wagen!! It's possible using VCDS 18.9 for solving this problem?
Thanks, worked a treat.
Man with good patience!
Hi guys👍, your content is amazing. I have a steering issu( feels very soft and does not give back any feedback from the road since) with my golf 6 GTI since we retrofit bi-xenon headlight. Is it possible to get in touch with you in any form? Thanks! 👍
So thanks, i almost gave up, but finally i made it,
thank you very much. You're the best.
Accidentally broke sensor while replacing ignition switch. New sensor needed initialized. This worked like a charm! Thanks !!
Here is a video of me doing this function for VW with a comprehensive diagnostic device: ua-cam.com/video/VqiZQEnZaKM/v-deo.html , you can have a look.
Thanks for the video. My A5 GTI has a faulty wheel speed sensor in addition to the exact problem you show in this video. Will this procedure work with the faulty sensor or must I replace it first?
Hi, I replaced my Steering rack, but it is still very stiff and displays a steady light on the dash. What should I do? it's a Passat B6
Do you have to do this while the car is in motion?
Well, my power steering stopped working after a crash where the steering wheel airbag went out, I am wondering if I am getting this fault because the battery was unplugged for a looong time (also the fuse for power steering pump was “tore in half”, so I hope it did not short out or the airbag explosion did not damage some electronics in the steering wheel…
I have seat leon ..i put 060 in the group but does not work ..is there any special code for this probleme
Taky mi to svítí,může to být i špatnou geometrii?servo se zdá být v pořádku.
Do you need the full version of vcds and the real cable to do this or can it be done with the cheap on off eBay and vcds lite?
Thanks
i have 00778 g85 code but the steering wheel lamp is not lit, mine shows esp light next to abs, i recently fitted new lower arms both sides and the steering wheel is maybe 5degrees to the right of centre. will tracking the car resetting the steering wheel to centre clear the code?
Hi
I have the same problem and I replaced the steering wheel angle sensor but I still have issues and could you advise please? Thanks
Red steering signal means have to change all the sensor set means steering angle sensor or any one of them
Esses codigos dao para seat ibiza 6l amigo ?
Thank u so much bro
Good work
Where you find these number 40168 how can I found
Would you know why my traction control light dosent light up on the dash when I turn ignition on even if I try to disable it it don’t come on at all please help
hello i wanted to ask you i have a problem with the power steering when i bought it I had a yellow steering wheel light and the same yellow slip but the servo worked normally it was put on diagnostics and i got the code 00778 i tried to change that little sensor underneath steering wheel and tried to drive it a little and nothing, so I changed that big sensor that is in the steering wheel and after that the steering wheel became heavier and the steering wheel sometimes turned into a curve and the lamps still shine I don't know what to do
You have to be careful, i did the same but i used a clockspring (the big thing) for golf 5 with esp, and mine is without esp. That caused the problem and i still havent found a solution, i think im gonna dump the car in a river or down a cliff and burn it or something😂
It works on an SEAT Ibiza car ??
Congratulations on your channel. I have seen all your videos! I have a golf 5 and today I changed the steering wheel to multifunction and the steering head to highline. Everything works, the coding was done but the only problem is that the steering wheel light doesn't turn off with anything and the steering wheel is heavy because the electric assistance doesn't work.
I did a basic setting and it takes values on the indicator changes in the corresponding field in the vcds but with nothing it doesn't turn off and it gives the error:
02546 - steering limit stop
005 - no or incorrect basic setting / adaptation
And when the adjustment is complete, this error goes away and while the steering wheel light with orange color on the dial continues to stay on
, then throws the error:
02546 - steering limit stop
003 - mechanical failure. I went to a local garage and while doing the basic adjustment the light won't go off and the steering is still heavy. He told me that there must be a problem in the steering rack. Is it possible? can you tell me your opinion?
Thank you very much
you should probably try to return the module under the steering wheel and make basic settings. so you will find out if the rack is broken or not. maybe he can't connect the new module under the steering wheel with the old steering rack
Can I do this on my vw eos, because my steering wheel doesn't turn both left or running right it's very hard to turn
Had the same problem with my caddy after retrofitting cruise control i followed your video but when I went on basic settings i turned it on and solved the power steering problem but for some reason the horn is not working any idea where would be the problem because when I put the old control module it works but when I change it to the new one it stops working . Any advice why? Thank You
My golf 5 2.0 BHY is showing red light on the cluster n before was orange today is very hard to turn any help pls
Super good
Tnx for help bro!❤
best regards I have a passat 3c 2006 and I have that dtc sensor g85 I have given the settings and nothing changes the g85 sensor and nothing follows the dtc at times turns off the brown guide but returns dtc what can I do. when I start the car it turns red, it turns yellow and then the fixed code remains
Thank you very much for the video hise the same setting. and I could turn off the dtc 00778 thanks
Hello,teacher (BMW 7 series ce9401 )what is roung whit it? please help me.
Thank you 🤩
Haw for touran 1.9 HDi , longuage french please
I just changed the steering wheel module from BC to CH, and have this hard wheel issue, I tried the left and right without VCDS and no luck
When I got to basic settings channel 60 and turn the wheel the value doesn't change, it just reads "0.00" Does this mean the steering angle sensor needs to be replaced?
@@johnnyg4255 what error do you get when performing the basic setting? What errors do the brake module report?
Thank you, thank you very much. It worked for me!
Hell sir I am from India and I have a Skoda Laura 1.9 tdi pd car. This car has been completed 200000 km and still run like new. I want to know how to care my unit injectors for more life. Because this engine has been discontinued from India.
Thank you! ❤❤❤❤❤😊😊😊
hello I have default 00778 on my golf 5 but no indicator light on the dashboard, do I have to recalibrate it to zero too ??? THANK YOU
@@Mechanic.Bilverkstad yes perfect I did the calibration like the video with the VCDS and everything is fine
Thanks
Mulțumesc mult
Says error group 60 not available ?
Hello mate. I changed the sensor, but I can't seem to remove this error. It looks the same as yours. The customer bought the sensor on AutoDoc, so Im not sure if its original or can read it. So I have to questions: 1. Does it affect it if its original or not? 2. How do I know if the sensor is working at all?
Always funny seeing “mechanics” from shops commenting on here 😂 so glad I down my own work.
I have had a G85 defective code that I am trying to clear and a failure to calibrate. I also have an ESP light on that will not change. I got a new wheel sensor and replaced it and have followed the procedure here. No joy though in clearing the code. I have a valid copy of VCDS and cannot seem to get it done. Suggestions?
@@kevin.afton_ Nope, it is the old VW cascade of problems now. I believe I have a short somewhere in the wiring. Either I did it or the something went wrong. I still get the defective warning on my scans and cannot reset it. Now, something is draining my battery. Going to have to trace wires. Suggestions if you have some?
@@jimmccanna For the battery draining you can look up some "how to check parasitic drain on car battery" videos.
For the G85 I will see somebody with more knowledge than me Tuesday, I will let you know if he managed to fix mine.
By the way if you have a valid copy of VCDS why dont you go on their forum? They will help you.
@@kevin.afton_ Thanks for checking with your friend. I am really curious and want to get this solved.
@@jimmccanna Yeah me too, unfortunately I have a problem with my brake so I cant go tomorrow and he is only avail Friday. Ill keep you updated.
Did you go to the Ross tech forum?
In my case security access code was 31857, procedure worked fine at first try.
40168 was also accepted though, but turning wheel all the way left & right like 20 times didn’t do anything. At least I got big muscle now 😅
Hi SHtatkus, wow thank goodness I started reading comments, got my 2006 mk2 Octavia back from the garage today after fixing the ignition barrel and surprise surprise yellow steering light on, spent well over a hour & half with laptop with long power extension as battery on laptop in knackered, trying 40168 which worked and logged me in but no joy no matter what I tried with left & right turns, quick drives etc and nothing worked. No data when turning the wheel. First thing tomorrow I’ll try you code and pray it works. Can I just ask how you came up with your code, is there more incase this code doesn’t work. Cheers
@@game4alaughman Did it work? I think it depends on the type of abs unit your car has, I might be wrong though
Where did you get the software from and how much is the software
search "ross tech" VCDS cable costs but the software is free.The cable you buy depends on which car you have
Hi i have this light on after changing steering wheel module i got one from ebay when i try to go to basic settings it says error and m block 60 isn't available plus where do i get the coding from my old module to put in the replacement it doesn't give any long coding when i go into this module
on my golf i had 00778 - Steering Angle Sensor (G85): No or Incorrect Basic Setting and i needed to adapt the sensor to the ABS
yes abs module MK60 G85 settings but i have ABS module MK70 i must setting G85 on 44 steering assist module
You should to do test drive because if the car is stopped it does not take the calibration
I want a solution to this problem
I dont get it. I did the same but not working. Same codes and values, Horn, airbag are okay. Help
hello, please what's the code 40168
.
I have a 1.4tdi 2007 polo shirt
👍
Hi, access code is not coming up on my vcds
Peace, is there a danger if we don't put it out
Your ABS, traction and if equipped with air suspension all will be at fault.
Did anyone find a solution? Im trying it for a month and nothing happened.
man you have to lead and it will disappear and I had this problem
Działa w audi a3 8p. 2003r. Grupa 060
Doesnt work for my golf 2008 :/ am i doing something wrong? Coding II 40168, basic settings, 060, full right 5s, full left 5s, drive less than 20kmh...and nothing
Code 00573?
Error when I write 060 ??
Štvrt otačky do prava , štvrt otáčky do lava, plny do prava 3 sekundy počkaš!!! potom plný do prava 3 sekundy počkaš !!!vyrovnať kolesa a nasledne sa rozbehnuť hotovo !!
So you just have to keep trying the basic setting with or without coding password 40168 - AMAZING!! LOL
I need this answer too becouse i am changing spining and module and wheel with MF, need for coding and calibration g85 sensor
i have abs module mk70.steering angle sensor i must set on steering asist module. for other ABS control modul need set angle sensor on ABS control module (but verysimilar procedure)
@@golfwagen4173 hi mate, we have code 0078 error. Steering angle sensor. It shows fault under abs module. So calibrate through abs module on vcds? Thank you
The fact that 140 thousand ++ have seen this video.... VOLKSWAGEN WHAT ARE YOU DOING? shitty shitty components. I'm here for a reason too.
Electrical Steering Wheel Warning Light!
Toto robí po odpojení baterky, vôbec netreba diagnostiku, len vytočiť plný rejd do oboch strán a ísť sa previesť a zmizne samo, už som to robil na viac autách. Ono si to musí overiť nie len natočenie volantu, ale aj dáta z jednotlivých snímačov ABS, potom chyba zmizne sama.
Problem g250
Ahoj, vcera som presne toto robil. A som ani za ..... nevedel urobit. Nechapem preco. Presne g5 ka.
v podstate nechápem prečo to nejde hned na prvý pokus. a rovnako nechápem dôvod prečo sa to zrazu podarí. čital som že ak vymeníš modul steering assist tak to nepojde nastavit vôbec (vtedy jedine do autorizovaneho servisu)
golf Wagen servo bolo menene v aute, chalan prisiel ci mu to neviem urobit.. a som nevedel 🙈 pritom som to uz robil. Mas FB alebo iny kontakt prosim? Dakujem
Kvoli tomu sa pytam, ci by sa dalo s Tebou komunikovat aj inak ako cez komenty 🙈😅
I did all of this twice, Light still on , something is wrong for sure.
Still on , i did a bypass, so it is probably sending the same message, bulb out etc, just hope the light burns out lol .
@@paddymccune8512 I need to bypass this , we have everything tried , how did you do it?
lol . there is zero tests in mi. usa you can drive anything ,in any shape here .
U need to play and drive...when u park the car with back it's solve , on a straight parking and play în parking, and it's solve whitout vcds.
@@marknagy5439 salut, prima data a revenit la normal după ce a făcut niște manevre cu masina. Apoi cu vcds... dar tot asa dai sa il faci și trebuie sa pui în mișcare masina fata,spate. Merge mai greu dar merge. Și eu am stat cu vcds 1 h... dar trebuie sa faci apoi muti masina....,a 3 oara a mers...
Data viitoare când umblați la km sa ii faceți și în ecu... 😂
Bit g269
Hey, j'avais le même défaut, passe voir mes videos 👍🦅😉
Hai
Traduction svp 😪
Vreau explicat în limba română
Turn on car wait 5 seconds ... Turn staring wheel all the way to the left wait 10 seconds ... Turn steering wheel to th right wait 10 seconds and then come back to straight the steering wheel will be recalibrated and the light will go out
No one is answering any of the comments 👎🏼
You have 320000 km 😅😅😅
hi pleasure stafano ... I on my mk5 I installed multifunction steering wheel golf mk6 gtd ... steering unit with code ch ... ring code c & cable airbag 1k .... tacho full fix but blocked for now, aspect cofifica immo ... now I have hard steering and steering wheel controls not working ... how do I code everything with vcds ??? can you help me with a procedure ??? thanks and sorry translation I use google ... my mail hgt88@tiscali.it .. ..thank you very much and a very valid channel
salve piacere stafano...io sulla mia mk5 ho installato volante multifunzione golf mk6 gtd...centralina sterzo con codice ch...anello codice c & cavo airbag 1k ....tacho full fiss ma bloccato per ora,aspetto cofifica immo...adesso ho sterzo duro e comandi volante non funzionanti...come codifico il tutto con vcds???puoi aiutarmi con una procedura???grazie e scusa traduzione uso google...mia mail hgt88@tiscali.it....grazie mille e canale validissimo
E fake. E taiat clipul. Nu spun ca metoda nu este buna, este buna dar el a taiat clipul.
If you get editing skills you would have more followers and learn how to do it before you recorded
👍
My fav youtuber! Man you helped me a lot thanks!
Tradu in rom1na