DIY Super Bright 3W mini LED Torch - Rechargeable
Вставка
- Опубліковано 2 січ 2018
- This cool and light weight super bright mini LED torch can last up to 10 continuous Hours with single charge. Like this Project and share with your friends. also Don't forget to subscribe!
MATERIAL:
Light Bead: goo.gl/JJfP8y
LED Lens: goo.gl/Nwx6Z1
Torch Push Button Switch: goo.gl/RsvNnx
Double Sided tape:goo.gl/MnhvWZ
Charger module board: goo.gl/CQjyUR
Heat shrink tubes: goo.gl/aomb2G
20ml syringe:
Old laptop Battery cell 3.7V:
TOOLS Used in Video:
soldering Iron: goo.gl/c3xCJH
Soldering Wire: goo.gl/Jb6tEi
Soldering Paste: goo.gl/16xrgn
Third Hand Tool: goo.gl/g4PXkx
Like Us On Facebook:
goo.gl/rUxA5C
SUBSCRIBE HERE:
goo.gl/2Epk4x - Навчання та стиль
Cutting that charging module was unusual but innovative. Nice work.
I love the hack with cutting the tp4056 board in half! Brilliant!!
super
im starting to realise that i defineatly found the channel that i like the most.
How to connect if I don't have out + - on my charging module
Great. And no annoying music.
Thank u so much...1 saal se jo sawal thha o aaj mil gaya ...
3.7 v battery me led k liye konsa resistance lagana h ????
Ans 3 ohm
Which resister used in this flashlight
How will you solve the heat problem without led driver?
Bhai ye lens online mil jayenge kya ab
Injection se jo torch banaya hai kahan se aur kaise mangwa
Soldering iron is way too hot. Control with a dimmer switch to a few degrees above melting point of the solder. This will preserve the tip.
Did u manage to use 3w led in your light? Do they stay cooler cuz they're made for aquarium? I found the 1w hi power led adequate for my needs.
TT
holaDe cuánto grados es el lente?
How many degrees is the lens
Muy bueno.
Thanks a lot for the information about item to buy
Bhai edit kis software sai kartai ho
Led lens সহ বাকী কম্পোনেন্টগুলো কই পাবো?
in 4:11 how you making a module?
Where is Led chip module link???????
I have everything i needed. I have a whole basement filled with random things from tissue paper to cleavers.
That's great! If you made one with a reed switch it could become more waterproof. Next project could perhaps be a diving light??
Very Very Nice Bhai
Awesome ❤️
how bright is this sir?...
awesome
At 3:09 a dab of heatsink paste will improve reliability.
KHz dish
Amazing....t
Where did you get the lens??
Very nice
Amazing!! I have a silly question, what does the blue cable work for??
"Battery minus" for recharge
Great
Hello bro you making channel in diy with your voice i am excited to listen your voice when you finished making the channel please post it
Sir can i ask if i use 4 led, is this means i must put 4 18650 and the same tp4056 charging module?...
1. you only need 1 bat and 1modul.
no2. if you attempt to use more batt. just make it pararel and connect to 1 modul. also add minimum 5ohm 1/4 watt resistor on each led, the only downside by using multiple battery with 1 modul is very long charging time.
no3. if you insist using 1 battery and 4 led as a load the battery will be quickly drained.
nice
Do how to make night vision goggles PLS😉
Nice
Resistance
Value
Good bro
why no music?
Ügyes munka, nekem nem jutott volna eszembe ez a megoldás...
A LED és az Aluminium lemez közé viszon (Arctic vagy Xigmatek) hővezető pasztát raktam volna.
Really nice, man. :)
super
Can you make railway signaling torch
Can we use 1 AAA battery to light up 3 led lights?
If you use the small one's and put them in parallel, I guess so
I love this channal nice
hehe I made the same installation. I reuse an old lamp wich had some useless solar charging and a dead NiMh battery
A very long time to upload a video
I would add a USB boost converter
Really good and simple project. Nice 👍job. Brother where did you get this bulb cell charging module. Is any websit Or online selling?.
See video description
Yeh Jo Apne LED ke aage lagaya hai woh Apne kahan se kharida tha uski bhi video Banaye
See video description
Why do you use a resistor?
Because 3.7v too much for the 3.0-3.4v led
Bro how you have connected the cell you didn't mention it please teach me again
Bhai 3 ohm nhi hoto 4 ya 10 ohm chal jayegi kiya Resistance
and withoutthat charging module cannot make flashlight?...
Yes, you can but needs to open it and charge battery apart.
i made a lot of small led flashlight with usb charger a samsung battery a switch and a very bright led without this small circuit and is good
What resistor did you use?
+1
Plz make vape.
Alatnya beli dimanaya
tokopedia banyak bro, TP4056 module, 3W high power LED, resistor, tombolnya self locking switch
@@JuraganLED kalo tujuan murni diy ok, tapi kalo tujuan berhemat lebih murah beli senter cree q5 (kw) cuma
Это наглядное пособие
so...... a 3Watt LED being driven through a quarter watt resistor ???? thats gonna fry!!! oh and some heat sink compound wouldnt have gone amiss either.
You send me torch
نائس
meteriels is verry expincive
Animesh Halder. Lol its cost 2$ at maximum if you choose right market:)
150 to 200 RS
Tafree
Please reply👋👋👋👋👋😣😣😣😣
Lamest solders i've ever seen.
Please reply 😮😮😮☺☺☺😂😂😂😂
Not 3watt ,only 1 watt
nice