How to use a sheet metal slitting machine
Вставка
- Опубліковано 27 вер 2024
- 🤔Interested in learning on a deeper level?🧐
Click here👉 www.asm101.com...
👀Interested in 1:1 coaching?
Click here👉www.asm101.com... Some fabrication 👉👉👉 • HOW TO BEND THE TOP OF...
How to slit sheet metal using a gang slitter takes into consideration afew key things.
Watch till the end for all of them!
Visit our website www.asm101.com for more info!
Thanks for watching
Subscribe here👉👉👉 ua-cam.com/users/c...
#sheetmetalslittingmachine #sheetmetalmachinery #sheetmetaltools
Watch our HOW TO playlist here:
👉👉👉👉ua-cam.com/play/PLwTrgRLtRjZE8zsFIFDNKlxhBjcy96JEh.html
we have a Hervoss slitter at work but it comes off a uncoiler through the slitter, through a seperator then wound up on a recoiler. our slitter uses spacers to set the width between the slits. Not sure on the maths as we usually just put in the info into edgemaster software and it gives us the setup. We will get something like 3 slits at 310mm on a 940mm sheet with amount 5mm scrap each side, and we try to have a clearance of 0.03 between the blades(blades are 12mm wide)
this slitter is so much different than the slitter i run at work
Really what's different about it?
I use a marathon slitter at work. It has the same 1/2" offset.
Thanks for the vids!
No problem...more on the way
@@asm101 just ordered a van mark im1465, steel lap siding, 3in eps, custom steel window jamb extensions, integrated j's in all my custom trim, new soffit and fascia. I appreciate all the tips! I'll let you know how it goes. At some point I want to get a roll former and get into real standing seam!
Our business changed for the better when we invested in a roll former...ours does 1" and 1.5" standing seam...takes 15min to switch over
Please make a proper video for please settings for multi slitter
What equations do you use when trying to figure out the sizes of the cuts?
I just add up the dimensions from my drawing then set my slitting wheels
Hi Alex, do you normally buy a 48" coil and slit everything for panels and trim yourself or do you order coil from supplier preslit to your panel width and slit for trim from there?
We purchase 10'flats for trim and pre slit coil for panels
Thanks for the reply 👍
What brand is that? We have one and we get inconsistent cuts from time to time.
It's a spar marathon brand... It might just be there name on it though and they contract out the build
What kind of slitter is this? Looking to purchase one for my new metal supply business, ty
Type in "Gary slitters"into Google and your good to go
Cool one 👍⚒
Thanks!