Often use and always running on full on throttle. So far no problem. Besides, why should be a problem? - this is not power-up process which burns electronics, but removal of additional LIMITER to meet the regulations of max speed allowed. Bobina itself doesn’t get hurt. And running faster a piston, requires to use high grade engine oil. That’s all it takes.
Yes. On original Ducati bobina “magic” wire is passing almost in the same place. Down the body plastic, there is a filling, which is soft and easily could by carved to find the wire. Once snapped, and tested, seal it back with any (non silicon) hermetic sealer.
I dont Under stand, u want it to be slower??? I have the Same CDI, my aprilia sport city one drive only 48km/h, I want to become it faster, so I need to Do like this what u Do and can drive faster??
No.. I want it to be faster! Look video again - when wire is cut, I can give more gas. Many countries no happy when little scooter driving very fast. They want little scooter go no faster than 50kmph. Scooter can go faster, but manufacturer needs to follow regulations. How to do? Easy way to do - is to put a “limiter” in bobina, and bobina can not make many ⚡️⚡️⚡️⚡️and motor can not run very fast. To make it run faster, you have to “remove” the limiter in bobina (cut the special wire inside of it). Additional trick to make it faster - put another carburetor, with bigger “entrance” (air intake), so more air/gas will come into cylinder. REMEMBER: if you like to drive fast, you must use only highest grade, expensive engine oil. This is very important.
@@auton3008 Yes, you absolutely right, but I've meant it as extra enhancement - once CDI is "unrestricted", the additional possible trick is a carburettor change. I can confirm, that my Zip100 4T with original carburettor on a flat asphalt and myself (65kg) leaned forward (for better aerodynamics) takes me for 70 kmh. Fastest I've manages to speed-up, down the slope, was 85 kmh, which is already too much for a little scooter. Otherwise, 70kmh is the top-speed average.
@@azbekreten6118 - when pillion (passenger) sits on the scooter, it keeps it feet on a little plastic platform. CDI is right by it left toe and bit upper. You need to remove plastic (embracing) cover (which has a screw pointed upwards in the middle of it, plus few more screws on it sides).
якщо це питання, то ні, не дуже вдалий проект, але якщо замість полоників справжню турбіну Пельтона поставити, то так, буде ефективно. Побачи на лінк в описании, там фоток повно.
This worked for my zip 4t 50cc thank you for the video ❤
Still ok or did anything brake?
Often use and always running on full on throttle. So far no problem.
Besides, why should be a problem? - this is not power-up process which burns electronics, but removal of additional LIMITER to meet the regulations of max speed allowed.
Bobina itself doesn’t get hurt.
And running faster a piston, requires to use high grade engine oil. That’s all it takes.
@@gallcek5161 runs fine i done it 3 months ago
Je peut le fair sur mon zip 4t 2023 en prenant aucun risque ?
@@Hfdgjjjhgccffcgsur un iget??😂😂
very good viedeo worked for me (piaggio zip c25 4t 2010 LBMC25C) would suggest to put tape over it
My CDI is metal, how do I make it in that case?
Yo sé lo hice a mis dos zip 50 y a muchas de dos tiempos las dejaba atrás (de serie claro)
It is compatible with the Aprilia sr 50 4t 2014
How fast it going now?
is it at left plastic? whice wire do i need to cut
hello, can i do this on the new zip 4t
Yes.
On original Ducati bobina “magic” wire is passing almost in the same place.
Down the body plastic, there is a filling, which is soft and easily could by carved to find the wire.
Once snapped, and tested, seal it back with any (non silicon) hermetic sealer.
Il y a juste besoin de couper le fils et après il est débride ? Il n’y a rien d’autres à faire
I got a piaaigio new zip 50 4 t it dosent work on mine😢
2011 model
Does this work on a 125 5t 2002 piaggio zip -anyone?
4t
I dont Under stand, u want it to be slower??? I have the Same CDI, my aprilia sport city one drive only 48km/h, I want to become it faster, so I need to Do like this what u Do and can drive faster??
No.. I want it to be faster! Look video again - when wire is cut, I can give more gas.
Many countries no happy when little scooter driving very fast. They want little scooter go no faster than 50kmph.
Scooter can go faster, but manufacturer needs to follow regulations. How to do?
Easy way to do - is to put a “limiter” in bobina, and bobina can not make many ⚡️⚡️⚡️⚡️and motor can not run very fast.
To make it run faster, you have to “remove” the limiter in bobina (cut the special wire inside of it).
Additional trick to make it faster - put another carburetor, with bigger “entrance” (air intake), so more air/gas will come into cylinder.
REMEMBER: if you like to drive fast, you must use only highest grade, expensive engine oil. This is very important.
@@jarasmus but if you take a bigger carburetor, the CDI will also limited the speed by 45 kmh, its Not make a sense
@@auton3008 Yes, you absolutely right, but I've meant it as extra enhancement - once CDI is "unrestricted", the additional possible trick is a carburettor change.
I can confirm, that my Zip100 4T with original carburettor on a flat asphalt and myself (65kg) leaned forward (for better aerodynamics) takes me for 70 kmh. Fastest I've manages to speed-up, down the slope, was 85 kmh, which is already too much for a little scooter. Otherwise, 70kmh is the top-speed average.
@@jarasmus where do i find this cdi on piaggio zip 50cc 4t
@@azbekreten6118 - when pillion (passenger) sits on the scooter, it keeps it feet on a little plastic platform. CDI is right by it left toe and bit upper. You need to remove plastic (embracing) cover (which has a screw pointed upwards in the middle of it, plus few more screws on it sides).
Ciao ma su uno zip 4t del 2008 posso farlo?
Perché la mia centralina é ac 15 dz50 lk 22a e sembra simile alla tua
How to blow youre motor up
Bad for the automatic transmission but whatever😂
But this is gonna make the scooter worn down faster
but but but dont care it will be faster and better. and if you know how to maintain a scooter its no problem
🤦🏻♂️
Это правда работает
якщо це питання, то ні, не дуже вдалий проект, але якщо замість полоників справжню турбіну Пельтона поставити, то так, буде ефективно. Побачи на лінк в описании, там фоток повно.
Похоже не на то видео ответил. Это про турбину. А если про мопед - да, работает. Старый трюк, многие механики о нем знают.
Hi can do it on 07 4 Stroke zip
Yes
Hi think someone already tried , I’m sure Fukked 😂I have photos but can’t send , I has this bike as no runner 😂
Ma almeno potevi far vedere a arrivava a km orari