Wow interesting video! 🤔 I knew one could run a few things through ethernet cable but I wasn't thinking you could run both Analogs and IP cameras at the same time on one system. I have both an older Lorex 720HD 8Ch and a Lorex 1080P HD 8Ch DVR system and just purchased an almost year old Lorex N883 IP 32 camera system and i'm ecstatic after watching your video and that I can use both older and newer cameras on the IP system allowing me to keep older cameras in their spots and adding in Lorex 4K motorized varifocal LNB9292 camera series for zooming in when needed or scheduled. I would recommend using shielded ethernet cable to try and keep the electrical side of the ethernet cable from electrical interference especially as i'm running the cables throughout my attic and theres already a bunch of power lines running all over. I'm using the newer Cat8 designed for both outdoors and indoors. I ran a few test on 150ft Cat8 cable and there is a difference like im not seeing any static lines on the screen and ran a few speed test on a few devices including a laptop and a few desktops and the results were much smoother compared to my Cat5. Question the crimping tool your using who makes it and what model in available as it looks much better than what i've seen online ? Appreciate the video and feedback. *Liked & Subscribed* i'm off to check out your other videos. Thanks Eddie J. Long_Island N.Y
You're a genius. I had some connections like that too, which the IP cameras is failing network to connect directly on phone. I don't know if I can show you? 😢
No interference. Note: This method is used when other camera wires are faulty. Therefore, when laying the cable, plan to use individual cables for each camera.
Thanks. Your teaching style is a piece of cake.
Amazing👍👍 So much usefull
Wow interesting video! 🤔 I knew one could run a few things through ethernet cable but I wasn't thinking you could run both Analogs and IP cameras at the same time on one system. I have both an older Lorex 720HD 8Ch and a Lorex 1080P HD 8Ch DVR system and just purchased an almost year old Lorex N883 IP 32 camera system and i'm ecstatic after watching your video and that I can use both older and newer cameras on the IP system allowing me to keep older cameras in their spots and adding in Lorex 4K motorized varifocal LNB9292 camera series for zooming in when needed or scheduled. I would recommend using shielded ethernet cable to try and keep the electrical side of the ethernet cable from electrical interference especially as i'm running the cables throughout my attic and theres already a bunch of power lines running all over. I'm using the newer Cat8 designed for both outdoors and indoors. I ran a few test on 150ft Cat8 cable and there is a difference like im not seeing any static lines on the screen and ran a few speed test on a few devices including a laptop and a few desktops and the results were much smoother compared to my Cat5. Question the crimping tool your using who makes it and what model in available as it looks much better than what i've seen online ? Appreciate the video and feedback. *Liked & Subscribed* i'm off to check out your other videos. Thanks Eddie J. Long_Island N.Y
Please help, do i need third party WiFi for Imou IP Camera + Imou NVR or they can connect directly?
You're a genius.
I had some connections like that too, which the IP cameras is failing network to connect directly on phone.
I don't know if I can show you? 😢
Is there a video interference with this setup? As you are also running 12volts DC on the same utp cable with both analog and digital camera?
No interference. Note: This method is used when other camera wires are faulty. Therefore, when laying the cable, plan to use individual cables for each camera.
@Techlogics So this setup is a temporary fix and not intended for long term use?
I have a hikvision ds-7208huhi-f1 , i have updated the dvr after that it was stucked on logo, is their any possibility to repair plaese
Hello sir I am having anlock camera how to connect my nvr
J'ai déjà essayé de partager les 12v sur deux caméras analogiques mais ça n'a pas marché
kısa mesafede olabilir ancak 70 metrede voltaj yetmez ve çalışmaz
Do you know you don't need a video balun. You can connect direct to bnc connectors
Tengo una cámara China tpz salida rj45 y quiero hacer lo mismo con un DVR macre
Bang coba bikin tutorial 4 camera input hanya satu, kita bikin switcher manual, namun pergantian video tidak loading dulu
Ip camera can view dvr analog?
Yes, a 4-channel DVR supports 1 additional IP camera, and an 8-channel DVR supports 2 additional IP cameras. like..
What about the DVR adapter
He forgot about the video. You should connect the DVR power cable. The connection was correct.
DC pin price sir
amzn.to/3D1G74B
Amazing
Thanks
Welcome
👍
😂😂😂 you need to keep on going to customer place for service