I tried a little bit of ab alternative and it is way tighter. Instead of taking the one thread under take it over instead. It looks a bit different but is still pretty
This is a beautiful and easy bracelet. I followed your instructions and made one for my wife. I would offer two thoughts. The bracelet I made was using nylon paracord, I think it would keep it's shape better with polyester cord and it is not a durable bracelet because of the large stitches and knots that form the links. It is very pretty and if worn gently it should be ok.
Can't wait for my parachord jig and chord kit to get here. Ive been doing this for a few days. And i am actually getting good at it. Been doing it by just holding it. Gona be alil easier with the jig
@@AlphaOne982 well, the day started off good… then the cold my daughter and husband have had decided it was time to grace itself upon me! So, it looks like my weekend will be spent coughing, sneezing and wrapped up in a cozy blanket… :(
Thanks for the vid! It was verry hard tho. Couldn’t get it tight as you did, had to start over again but i’m still disappointed about the finished results…
The only thing I came up with makes it look a little different but it is way tighter. Instead of taking that extra gold strand under the bracelet, take it over instead of under. It still gives the swirly look but is a little different. It is way way way tighter
if my calcs are correct it would 6.6 inches for every 1 inch of wrist circumference. I did this because one problem I have with these videos is they're calculated for 7.5 inches at all times. I also hate generating too much waste.
Hello, my friend, I suggest that you make a bracelet first, then see if it's OK for the belt, in a structural way. If you think that's Ok for a belt, then you can use more paracords for the core of your future belt, which will make this project wide enough. I hope I helped. Thanks for your visit and comment. Enjoy and let us know how it goes for you.
Hello, well the original design is called a Bootlace, this is let's say a modification of it, done with one more extra cord... Honestly, I'm not sure if there is a name for this design. You see in the world of knots and paracords if you experiment each day, certainly, you'll come up with some new design, but there's a problem when someone already made that and give it a name. That's why I always give credit in my videos to someone who already made it. If you know who did it already and gave it a name please tell me so I can give them a credit here. Or if you have a cool name for it please say. Anyhow thank you so much for your visit and the comment, I'm glad that you're here with us. Wish you an amazing weekend, have fun and enjoy!
@@AlphaOne982 I have been doing quite a bit of research and have been unable to find someone else who has made this creation. I think this is truly an original. Part of the design is similar to the Bootlace design however the way it is tied is a little different. It's like an Inverted Bootlace design. I think you made a great masterpiece! Thank you for all your wonderful videos and creations.
You are very good at what you do. I have learned multiple patterns from you. This one was by far the hardest because as others have said it won't stay tight. It is so beautiful but I am such a perfectionist about having tight knots that I probably won't be making another one because of this issue.
Well that was super easy… it kind of reminds me of the Celtic knot bracelet…
Now, add a stitching of some sorts to it… :)
Great idea Holly, but what color to use... Blue, white, green maybe...
@@AlphaOne982 what colors of microcord do you have? I think black would look best with those colors …
I'm waiting for the shipment, I'll have a black one in few day. Let's wait. 😃🙏👍😃
@@AlphaOne982 cool… I have an idea for you… but gonna prose it on Patreon…l
چه قشنگ 💖👌👍
You have the prettiest designs of anyone I've seen. Thank you! AND your videos are easy to follow, very well done
I'm sure I was doing something wrong, but after 3 hours, I gave up. I don't see any way to keep it tight as you're going along.
I tried a little bit of ab alternative and it is way tighter. Instead of taking the one thread under take it over instead. It looks a bit different but is still pretty
This is a beautiful and easy bracelet. I followed your instructions and made one for my wife. I would offer two thoughts. The bracelet I made was using nylon paracord, I think it would keep it's shape better with polyester cord and it is not a durable bracelet because of the large stitches and knots that form the links. It is very pretty and if worn gently it should be ok.
Wonderful!
Can't wait for my parachord jig and chord kit to get here. Ive been doing this for a few days. And i am actually getting good at it. Been doing it by just holding it. Gona be alil easier with the jig
Glad to hear that my friend. Enjoy!
Nice!😀
They are very creative. The design is so cool.
thank you
GOOD MORNING!!! Well, it’s morning for me…. So, good afternoon for you my dear friend!!! Hope you have a blessed day!
Good morning Holly, my dear friend. Yes to you it's morning for me it's afternoon and the weather is so bad... Rain all day.
How are you today?
@@AlphaOne982 well, the day started off good… then the cold my daughter and husband have had decided it was time to grace itself upon me! So, it looks like my weekend will be spent coughing, sneezing and wrapped up in a cozy blanket… :(
Sorry to hear that my friend. Wish you and your family a fast recovery.
thank you
You're welcome
Great job
Thank you
This is great! Going to make one for my friend :)
Have fun!
Nice bracelet bro. I'm going to do one in black and yellow
Thank you Mario. Yes that's a great color combo. Have fun and enjoy!
Wow , very beautiful bro...👍⚘
Thank you so much my brother. I wish you a great weekend. Enjoy!
Thanks for the vid! It was verry hard tho.
Couldn’t get it tight as you did, had to start over again but i’m still disappointed about the finished results…
The only thing I came up with makes it look a little different but it is way tighter. Instead of taking that extra gold strand under the bracelet, take it over instead of under. It still gives the swirly look but is a little different. It is way way way tighter
Great! Tks for dedication 🙏🏻
saludos desde Mérida, Yucatán, México 18/nov/2022
Saludos Gatus mi gran amigo. Muchos saludos para ti, Mérida, Yucatán, México. Les deseo un buen fin de semana, disfruten y diviértanse.
if my calcs are correct it would 6.6 inches for every 1 inch of wrist circumference. I did this because one problem I have with these videos is they're calculated for 7.5 inches at all times. I also hate generating too much waste.
What's the name of this bracelet?
hey i would like to make a belt with this design! can someone explain to me how to make this wide enough? thanks great video!......
Hello, my friend, I suggest that you make a bracelet first, then see if it's OK for the belt, in a structural way. If you think that's Ok for a belt, then you can use more paracords for the core of your future belt, which will make this project wide enough. I hope I helped. Thanks for your visit and comment. Enjoy and let us know how it goes for you.
@@AlphaOne982 awesome! Last question, can I make this with three colors? Thanks again for your reply!
Sranje.
Nece tako
Have You Thought Of A Name For This Bracelet?
Hello, well the original design is called a Bootlace, this is let's say a modification of it, done with one more extra cord... Honestly, I'm not sure if there is a name for this design.
You see in the world of knots and paracords if you experiment each day, certainly, you'll come up with some new design, but there's a problem when someone already made that and give it a name. That's why I always give credit in my videos to someone who already made it.
If you know who did it already and gave it a name please tell me so I can give them a credit here.
Or if you have a cool name for it please say.
Anyhow thank you so much for your visit and the comment, I'm glad that you're here with us.
Wish you an amazing weekend, have fun and enjoy!
What about calling it the Slithering Boa?
@@AlphaOne982 I have been doing quite a bit of research and have been unable to find someone else who has made this creation. I think this is truly an original. Part of the design is similar to the Bootlace design however the way it is tied is a little different. It's like an Inverted Bootlace design. I think you made a great masterpiece! Thank you for all your wonderful videos and creations.
You are very good at what you do. I have learned multiple patterns from you. This one was by far the hardest because as others have said it won't stay tight. It is so beautiful but I am such a perfectionist about having tight knots that I probably won't be making another one because of this issue.
все тоже самое - только на русском