Is it possible to turn the plastic diffuser 180 degrees so it's using the good edge (not melted) seems the same when I looked at it. Will the light be dimmer?
Question . My edge light led melted a little bit of the thick diffuser panel which sits close to them. After replacing the strips I noticed a bit of light scatter around the bottom edge. I think it's because the led had made a little melt mark on the edge of the panel. Would it be OK to sand that edge with a fine sandpaper to bring a smooth finish back again? The panel is not the easiest thing to find anywhere used online. Any advice welcomed. 👍
Sir, if the white screen is little bit damaged (crack) and slightly visible in tv screen....but is there any relation between the backlight and the white screen for tv screen to blackened??
thanks for the video. My 43 inch samsung did the same thing but worse. Can I just flip around the light diffuser with the melted area toward the top? Has anyone tried this yet?
I changed my backlight it was working, after one week backlight dont come on, when I toched the connector of wire that connects power board with mother board backlight come on and works for 1h after that they work dimed barely see the screen, anyone nows?
Ask lng idol f normal ba na 213 volts ang out ng backlight driver ng samsung 48 inches ko napundi kc lahat ng backlight nya sabay,out of 32 beads 8 nlng ang hindi napundi,sinukat ko out umaabot ng 213 volts,normal po ba salamat sa sagot
@@DANEXTTECH oh ..ok...thanks for Reply. I have a question that I have a samsung 32M5570 led smart tv with edgelit problem. It will be top and bottom LED strip or all 4 side led strip ?
I am getting ready to repair my backlight issue. This video has too many issues where the speaker would skip over difficult issues and not handle those issues correctly. For example, remove some frame pieces to get to the old LED strips. He did not show how to remove the power switch module. Some parts disappeared without explanation☹. He was difficult to understand several times because English is not his first language.
Thanx for your vlog,successfully done,a good tutorial,more blessing to your you tube,god bless
Is it possible to turn the plastic diffuser 180 degrees so it's using the good edge (not melted) seems the same when I looked at it. Will the light be dimmer?
Nc thinner touching easy remove past
Congrats po Sir God Bless po
Kung mag comment po kayo English dapat para ma sagot nya kayo.😅
Pinoy Po ako
Question . My edge light led melted a little bit of the thick diffuser panel which sits close to them. After replacing the strips I noticed a bit of light scatter around the bottom edge. I think it's because the led had made a little melt mark on the edge of the panel. Would it be OK to sand that edge with a fine sandpaper to bring a smooth finish back again? The panel is not the easiest thing to find anywhere used online. Any advice welcomed. 👍
maybe youve miss to put it exactly or you don't clean it sir
Normal lang po ba boss ang 316v output ng backlight driver ng ganyan
Thanks man ❤😊
Sir, if the white screen is little bit damaged (crack) and slightly visible in tv screen....but is there any relation between the backlight and the white screen for tv screen to blackened??
Yes . If the screen has any kind of damage it will be worse in the future.. then it becomes black no picture.
newbie is watching sir
thanks for the video. My 43 inch samsung did the same thing but worse. Can I just flip around the light diffuser with the melted area toward the top? Has anyone tried this yet?
You can it sir
I changed my backlight it was working, after one week backlight dont come on, when I toched the connector of wire that connects power board with mother board backlight come on and works for 1h after that they work dimed barely see the screen, anyone nows?
Ask lng idol f normal ba na 213 volts ang out ng backlight driver ng samsung 48 inches ko napundi kc lahat ng backlight nya sabay,out of 32 beads 8 nlng ang hindi napundi,sinukat ko out umaabot ng 213 volts,normal po ba salamat sa sagot
Check NYO po sa filter cap sa supply Ng backlight Po ilang volts, then check sa LED type 6v or 3v ba Yan Po.
3volts lng po ang led beads nya
Hindi po ba pwedeng baliktarin naalng ung reflector para sa taas nalang yung may sunog? Thanks po
Good pm sir ..what size po ba ng screw dpat sa wallmount ng samsung 8 series 43inches ty in advance po
BUMILI NPO KYO NG TV BRACKET FREE NPO LAHAT NG SCREW SIZE PO
Je cherche bacjlght pour cette marque ou cetrouve
Don't try at home ...bcz display is very risky ..and ye jo set repair kiya h usme backsheet jab tk chnge nhi hogi tb tk shi nhi hoga pura
White shade coming use white tape at damage trasparent sheet
Baby is watching 😊 master
Hey,what is the major cause of this my tv is 3 months old
this is a common issue in this model.. or excessive use.
Done.
Asa dapit shop nmo boss
Davao city TORIL
Je cherche la société qui la fabrique
Replaced backluhhts and now its worse. Bright hot spota at bottom of screen and huge dark spot in the center
Better Technician needed
@DANEXTTECH less than helpful. If you don't know how to help me just say that.
But what is white spots in right side bottom edge panel. at 25.21
That was due to a damage edge of plastic ( burned)
@@DANEXTTECH oh ..ok...thanks for Reply. I have a question that I have a samsung 32M5570 led smart tv with edgelit problem. It will be top and bottom LED strip or all 4 side led strip ?
Move this logo so i van see
Burger King menu TV.
How much price of led strip
1k below
@@DANEXTTECH I want please address of shop
Kya ye backlight original led ki hai
What is the price for this back light
KINDLY CHECK ON WEB YOUR TV MODEL
Mag kano pag palit backlight 43 din
location
Magkano palit backligth?location pasig
ilang led light po meron ang tv na yan?
Please watch the video po
Same lang din po ba yan ng UA43RU7100G
Led strip how to buy?
Lazada
@@DANEXTTECH link please bro
Bagal mental gayan ho app 😅
Panood
Salamat master
Thanks po master
@@DANEXTTECH sir nasa magkanu po b magastos s led po ng flat screen 43inches kc po nbasag po
Sna mtulungan nio po ako plsss
@@eduardopalaganas113 nku mahal.. parang bagong tv..hanap klang 2nd hand kung mayroon sa mga shop po.
All types backlite available my shop
Hello I need backlight
Pp
samsung tv faltu
Yes..amara tv er backlight geche
I am getting ready to repair my backlight issue. This video has too many issues where the speaker would skip over difficult issues and not handle those issues correctly. For example, remove some frame pieces to get to the old LED strips. He did not show how to remove the power switch module. Some parts disappeared without explanation☹. He was difficult to understand several times because English is not his first language.
He didn't post to educate you on the whole process. If you want to do it, why don't you discover?
@@briand9137 right...
@briand9137 then what was the point of the instructional video if not to educate people on how to repair it properly?
Very poor design