Autel and VVDI 2 failed read isn DME MSV80. Update I was able to edit ISN with Autel Kind-of...
Вставка
- Опубліковано 15 жов 2024
- Working on a Bmw Dme msv80.... Autel failed vvdi 2 failed to Read ISN , Autohex read well but still need to change ISN is donor DME so time to get in contact with Microtroniks to add licenses for DME clone .... So in reality I'm going to lost money on this job.. Hopefully others in the future will be kinder!!! Thankyou
CONTACT INFO
856 520 4290
KEYS24@YAHOO.COM
That's a good video thank you very much for sharing your knowledge and I'll watching your others.
I love people like you that gives out information God bless.
I just red isn on a used msv80 with im508 and gbox 2 no problem for e70 2010. But the problem i had was writting new isn to cas.autel would read cas but renew fonction wont work
I've never had luck writing ISN with Autel.. I use Autohex for that and it easier because in factory mode no need to open ecm. But the renew function software does work that is on Autel, I've renewed cas files with Autel then wrote file back with different device and works fine. The Only thing with E70 that has 8hp tcm you must maintain same ISN original from transmission because last I checked no way to alter isn on that specific tcm...
There may have been an update on this. The resistors on mine tell me they should be a 100ohm not 1kohm
This video was posted long ago.Thanks for watching... Unfortunately I no longer use Autel for BMW.. I use Autohex2 for everything because it has always proven to be the most stable. No fear of sudden data loss. Thankyou
im thinking of starting to start a auto locksmith buisness seems intresting also. Any advice you have for a newbie and what equipment would you reccomend me to buy on a bugdet to start off. Last question is the pay in this buiness good?
Hey bro I tried different different methods with Autel but it’s doesn’t work at all I thought my connection or update issues , in some scenarios Autel it’s sucks even I tried to reprogram Mitsubishi pajero 2011 model it’s only gives me a single wrong PIN code I’m fed up with Autel..
Autel is one of many tools, you cannot expect autel to do everything it's says it does because that's a lie on there part.... I use alot of different tools. You can try pin codes
Regular Pajero
Gas=1803
Diesel= D135
Pajero sport
940F
4838
3828
Pajero tr4
9154
6329
Also if you have tried multiple times to enter pin code immo functions will be blocked .. leave key in the on position for at least 1 hour then attempt to enter pin code again
Goodluck
Write the Autohex ISN u discovered into the CAS
Use CGDI to do it
All continental DME are not working with autel
I was just making a video so people can see what to expect from these tools... I use Hexprog with cloning license now... Works perfect. Factory Mode is Excellent