2006 lexus IS250 water pump and timing replacement step by step
Вставка
- Опубліковано 28 сер 2022
- This is a suggestive demonstration of what to do on your timing and water pump repair for a 2006 Lexus IS250 again this is just suggestive I always fix my own vehicles so have at it I try to document as much as possible if something is left out you can always ask me. I am not an AFC certified mechanic I'm just not afraid to take things apart and put them back together as such So if you are hoping that I am certified I am not again this video was just to show what other people have not shown During this process on a how to. Thanks for watching
I salute you bro for doing this job at the back yard and without any power tool.
Thank you,.. you are one great person, who taught me a lot, God bless you 🙏 and keep up the good work...
Very nice brother, conventional knowledge is that one has to lift the engine up. That means you are of very few people on earth who figured this out.
I almost disconnected it from the engine. Now that I know, Ill try this approach.
I noticed the ratchet straps, did you have to lift the engine slightly to drop the oil pan?
I've done this timing chain thing with a gs450h from 2008 with the same knocking sound you have in this vid after you've start her.
Did the sound went smooth after a time? I had the thoughts of there was no oil coming thru pulled everything off again to see there was nothing to see...
Just sounded like it got no oil, what was your experience?
this really is challenging because I dont lift engines. Not sure if I should get rid of the car. or get a new engine.
Did you have to remove the engine mounts ?
How did you lift the engine up ?
What did you lift the engine up with ?
How about 4 wheel timing chain removal Lexus is 250 2006
probably same design as this. Its on alot of models v6 sienna, rav4, some camries, lexuses gs and such with the v6 engine. carcarenut has channel that showed these close design of toyotas.
Do you know if this is the same for the AWD 06 Lexus is250?
And what manual are you referring to in the video. I could not find any for mine.
good work! I have the same car. Is it necessary to lift engine ?
ya if u wanna get the cover off. I messed up my cover.
@@farasmaroge1465what exactly happened with your experience? I’m doing my own as well and I’m having trouble
with me, its a gs300 same design as this cover. I did kinda bend the cover trying to pry it off without removing the pan. I have to get the engine lifted up and possibly jack the transmission or take out the engine. I found another cover junkyard $100 though. It'll be hard to get underneath the car cause u need special lifter like he has in this video I had one from harbor freights. Sometimes I honestly think ill get squashed if I take out the engine out of the screws that hold it though. Its a little risky imo. U can probably follow whats in this video. However, proceed with causion because you will be underneath. With me, I broke the bolt in the head because the tensioner bolts were too old and I didnt get new one. My timing chain kit didn't come with them! I have to remove the engine now. Heading that route. I am sure u can get yours done though.. I still have my car out in the garage at this step. This cover circulates oil into the engine, cams. Don't try to take it out without getting the pans out. Its impossible. Super important because of the pump you will mess up ur engine. @@jaythereal0633
I ended up putting it all together I had bad valves and didn't know. Bought another head and gonna do this all over again. Wasn't that bad just take time. Helps if u gota lift.
The piston 1 and 4; do I need to do something to put them in place ?
Or they adapt themselves?
Make sure all your timing marks are in place 1st before taking off your chain that is crucial
@@kloudlifeproductionsw8yze412 to late , now I don’t know which pistons need to be on top!!!
i have all the marks on line but wanna be sure before put in back all together.
@Jonathan Herrera
Alot of the videos I found on doing it aren't up any more as long as you had it in time before you took the chain off it should be fine because all your marks in line are you guide
Why did the timing chain need replacement?
It started rattling shortly after I purchased the car I Googled it and found out that's the reason why it was rattling. It was time to replace it and the car had over 100k on the clock it's always been a rule of thumb to find out if and when these types of things have been done to any vehicle I buy it helps
To know how long I have before
Things start falling apart
The crankcase need gasket or just silicon?
I used Silicone called the right stuff it's a high temp high strength gasket maker
I also let it dry for 2 days just to be sure it was going to be a good seal Before I put oil back in it
Ok thank you ơne mởrẻ thing timing chain cover have like 7 bolts where the pick úp tube go i remove all of thêm do i need to put silicon or a gasket or just the bolst .
You can put a little silicone on that make sure it's extra clean before you do it as long as the gasket that's there is not damaged. You should be fine always give it time to dry first
I used RTV called the right stuff Lexus does not make a gasket for the oil pan