Top job ! Hopefully this will stop all the questions we see on the forums & FB. Most of the questions are because folks are not bothered to read the manual.
Quick question when I laser Range find say the fox and it auto corrects the crosshair radical which X do you put on the target as I shot a fox last night after laser range finding it and I aimed at it with the bottom X and reviewing the video it’s actually the main cross in the centre that was on the back of the head is where the bullet went
Hi when you get the x on the ret after ranging a target that s the hold over marker you use to aim with. sounds like you didn't get a acurate solution. posable got a reading from something else.
@ I think maybe my second point of zero would be about 240 with the rifle. The fox was only 248 so by me aiming with the ex in the back of the shoulders the actual main plus of the radical was on the back of its head, so maybe that’s why it went in the back of the head and not between the shoulders.
Thank you for excellent review. Hopefully you will add some tricks, what to do, when ballistic calculation is not spot on, despite all inputs are according to manufacturer data. Which values should I play with, to bring calculations to work properly. Thanks again, from not so normal person, who understands and prefer metric system to imperial one. 😊
I was thinking of moving up from the Alpex 50T I have to this, but having the focus ring on the front of the scope still is a real pain. Its really stiff and trying to focus in on a target isnt easy. Focus should be on the side like my other optics. Far easier to use this way.
Could you tell me where I’d be able to find ballistic coefficiency as am struggling to find any at all on ammunition am using. Am using Winchester subsonic 42gr max in tikka t1x. Any help would be great thanks
Why is it the lrf box is in a different place on every one i see, mine is right at the top of the reticle and leaves the screen with 7x mag, i could see nothing about moving where the lrf box sits
@TheNightVisionShow thanks the box is low but the laser is high like you said takes a bit of playing about, if I could get the lrf box just below centre crosshair would be perfect, hopefully there's a future adjustment as the BC has performed well for me out to 280 metres
@@TheNightVisionShow Thanks, Also when you have a second zero profile say A1 for air and A2 for rimfire do you also need to have two different profiles for the ballistic calculator. Last one ! Does the unit use internal battery forst then the external. Mine does seem to register there is a external one fitted
ive set my one up. Everything was fine but for some reason the mode for day/night auto has completely disappeared from the settings. So I'm permanetly stuck on day mode. Any ideas how to get the mode back? Many thanks
Gday mate. Do you know how to move the box that the laser pings in. Mine is in the upper right and a fair distance from the reticle on 3.5 magnification. I have seen other videos where it is lower left close to reticle centre. Can’t find anything in the manual about it. Also the second reticle you get when using the ballistic calculator won’t piss off after taking a shot. Any help would be greatly appreciated Thanks mate🇦🇺
Bom dia, tenho uma Alpex 4K e também lhe coloquei um suporte de IR na mira como o do filme. A minha pergunta é: qual o seu acessório de IR que pega nesse suporte? obrigado...
Sorry posted when I left unattended. Re-below question regarding moving reticle. On center reticle my Alpex 4K only moves back into middle of screen when zoomed into 7x mag plus? I have center reticle mode turned on.
Morning, even with centre ret on as it's a digital device it may be off on some rifles. could try change the scope hight or zero distance and let the bc do the rest of the work.
Hello just got the hik alpex 4k lrf and I did the firmware updates straight away through the app next to my scope, when I go on app all says up to date, you mention about clicking restore to save the firmware update ? Does restore not restore it back to the factory settings for if you was going to I.e sell it ? Any help much appreciated Thank you in advance Mitch
hello, after every update you need to do a restore for the new firmware to take effect. it won't lose your zero info, but will clear the BC data so its worth taking note of that. and it will return all the settings to factory like OSD and smart ir etc
Hi I tried to zero last night and run out of y going down I have medium sports match rings on when I thought about it had the ballistic calculator turned on would that impact me trying to zero Thanks
Hello! Mine just arrive yesterday, and today was my 1st day shooting. Whatever i saw that mine doesn t show that degrees on bottom and the right anywhere. Do i need to activate it Somewhere? Thank you!
I'm a bit confused about the zeroing profiles and using the ballistics function with them... From what you've said, you can choose A to E, and for each of these, assign a number 1 to 5 to each, so a total of 25 possible combinations, and each of these has a zero distance input. Fine so far. But say I want to set up my air rifle on profile E, and I use different pellets and or power settings. So I set up say E1 as 15gr low power, E2 as 15gr high power, E3 18 gr low power, E4 18gr high power and so on. If I then want to use the ballistic calculator, I'm limited to 5 total ballistic tables. Meaning that I can't really use the ballistics calculator with reticle profiles A to D (which would be different rifles) if I've used up the 5 tables with my air rifle ballistics on profile E? Is that correct?
Hi you can only have 5 BC tables set up in the scope. so can't have ( E1 as 15gr low power, E2 as 15gr high power, E3 18 gr low power, E4 18gr ) so could only have 1 set up on the bc or use all 5 slots on the bc for 1 ammo.
I see you have yours set @ 20m range & moving the scope around quite a lot & the balistic x is not moving & stationary below the retical. Mine when zeroed with the sight @ 0° elevation it is central to the retical tilt it up or down 1° & the balistic curser moves up above the retical 0.8mm still @ 20m never did this before the .110 update even when i tried it @ 40m i can not get the balistic x to center on the retical it comes out 3.8cm above am totally at a loss with this .110 update was perfect with .88.
I notice on this video that your firmware build is V5.5.81_240229! On mine it is V5.5.81_240202 but on the sight app it’s saying no updates? So is mine or others an older build? Or are we waiting for your build to be cleared for public use? Thanks 🤩
i thought it was you (dunno for sure )who did the sytong ht 60 review..i bought 1 because of your indept ,how to set it up etc ..and it is stil going strong..if it was not you sorry about that ..😀 p.s is this better ore the same as the pard ds 35 i thought?Both are way to complicated for me ..i stick to the sytong ht 60 ☺
@@TheNightVisionShow No thanks, I'm 70 now and digitally challenged. I spent many years handloading various calibres with custom barrels and culled four figures worth of deer and fox. I used a thermal spotter in later years but stuck to an image intensifier on the back of my day scope for shooting at sentient creatures with a pulse. Just because the current tech savvy generation can work out how to operate a computerised device, it doesn't necessarily follow that they will have the fieldcraft experience or accuracy skills to operate the mechanical side of it. However, that's just my opinion. I believe I'm still allowed one, even under the current government. Good luck to all shooting folk, use it or lose it.
@@TheNightVisionShow Hi there, sorry but there really is a sound issue from your end on this vid', its unfortunate, because I want to understand the Hik Alpex 4k lrf before buying one. I have tried on another system, but the result is the same, very muffled. Can you look into this, thanks.
Top job ! Hopefully this will stop all the questions we see on the forums & FB. Most of the questions are because folks are not bothered to read the manual.
Hi,Thanks for the comment, yes we hope so there will be a part 2 for zeroing coming soon.
I have read the manual and it is rubbish
Thanks set it up with little or no problems and I even read the
Manual!👏👌Even Ballistic data!
Hi,Thanks for the comment good to hear.
brilliant timing just ordered one and it should be in the store wednesday 19th June 2024.
give us a shout if you get stuck
Nice one mate, iv just got back from zeroing mine, I'm going to set the rest up now I know how 👍
Thanks
Paul
Hi glad it helped there will be a pt 2 coming but sounds like your on it already.
Great video thanks for taking the time taken so much of the hassle out of set up
Hi cool, Thanks for the comment glad you liked it.
Quick question when I laser Range find say the fox and it auto corrects the crosshair radical which X do you put on the target as I shot a fox last night after laser range finding it and I aimed at it with the bottom X and reviewing the video it’s actually the main cross in the centre that was on the back of the head is where the bullet went
Hi when you get the x on the ret after ranging a target that s the hold over marker you use to aim with. sounds like you didn't get a acurate solution. posable got a reading from something else.
@ I think maybe my second point of zero would be about 240 with the rifle. The fox was only 248 so by me aiming with the ex in the back of the shoulders the actual main plus of the radical was on the back of its head, so maybe that’s why it went in the back of the head and not between the shoulders.
Awesome video mate. What lever are you running on the focus ring?
Hi, thanks for the comment, the lever is a fishing coaster can get them on eBay or Amazon.
Nice and easy to follow
Glad you think so! and thanks for the comment.
Thank you for excellent review. Hopefully you will add some tricks, what to do, when ballistic calculation is not spot on, despite all inputs are according to manufacturer data.
Which values should I play with, to bring calculations to work properly.
Thanks again, from not so normal person, who understands and prefer metric system to imperial one. 😊
Thats all coming up on Part 2 on Friday, thanks for the reply.
Can the lrf be adjusted? Mine hits below the box on the screen
Hi, They are fixed from the factory.
Thanks buddy nice clear video god bless ya
Thanks 👍 glad it helped
Brilliant job thanks for this top video
Hi thanks for the comment Glad you enjoyed it
Hi I can't seem to find the Torque specs. Can someone please help with info as how tight the rings must be tighten
I have never torque them, but just under 2 nm would be fine
hey,
what do you have on the focus ring?
its a breakaway coaster can get them on Amazon amzn.eu/d/9QCTJPr
I was thinking of moving up from the Alpex 50T I have to this, but having the focus ring on the front of the scope still is a real pain. Its really stiff and trying to focus in on a target isnt easy. Focus should be on the side like my other optics. Far easier to use this way.
they are really smooth, or could haver a coaster on it.
Could you tell me where I’d be able to find ballistic coefficiency as am struggling to find any at all on ammunition am using. Am using Winchester subsonic 42gr max in tikka t1x. Any help would be great thanks
hi G1 is 0.1266 4g gr subs that's taken from the element app.
Is it possible to adjust the brightness of the reticle please.
Hi not the ret only the whole screen.
Why is it the lrf box is in a different place on every one i see, mine is right at the top of the reticle and leaves the screen with 7x mag, i could see nothing about moving where the lrf box sits
All set from the factory. It will all change depending on scope mounting,height and individual zeroing of each rifle and calibre.
Hi, every scope is different all depends on mounting hight and the rifle. but the lrf box is set from the factory.
Is that going to be able to be adjusted? Mine is right down at six oclock and quite annoying @TheNightVisionShow
@@stevenobrien_22-250 We have asked the question, so I am pretty sure Hik will be on the case.
@TheNightVisionShow thanks the box is low but the laser is high like you said takes a bit of playing about, if I could get the lrf box just below centre crosshair would be perfect, hopefully there's a future adjustment as the BC has performed well for me out to 280 metres
Be nice if you could plug it into a laptop and apply all of your preferred settings
just enter them in the scope its no big deal.
Hi Team, Is there a reason the reticle is high & right off centre when on 3.5 base magnification? I’ve adjusted to center
select centralise ret in the menu
How do you get the picture on picture on?
on the lrf model press and hold the lrf button.
Hi
I bought the full kit from yourselves. How are you getting the ir torch to pass over the LRF as mine won’t?
Hi, may need to offset it to the side or mount further forward.
Do you push the top turrent button to freeze the image
Hi, yes once in the freeze frame icon.
@@TheNightVisionShow Thanks, Also when you have a second zero profile say A1 for air and A2 for rimfire do you also need to have two different profiles for the ballistic calculator.
Last one ! Does the unit use internal battery forst then the external. Mine does seem to register there is a external one fitted
Nice scope. Is this something that’s available in the US as well?
they are under the brand AGM
so what mounts do i need so i can swap it from rifle to rifle
We recommend these from CSW www.scottcountry.co.uk/products/britannia-qr
ive set my one up. Everything was fine but for some reason the mode for day/night auto has completely disappeared from the settings. So I'm permanetly stuck on day mode. Any ideas how to get the mode back? Many thanks
non LRF ? press and hold the back right button
Thanks for the informative video, during the shot playback feature I don’t have any Audio/sound, is this normal or is there a problem with my scope?💥🤔
hi,
have you turned the microphone on ?
Yes! Still no audio when clips watched back through scope though??
@@JimRobson-l5d can't play sound back in the scope. only when the footage is downloaded to a phone ect
Good stuff thanks 👍👍
No problem 👍 it could help a few people.
Gday mate. Do you know how to move the box that the laser pings in. Mine is in the upper right and a fair distance from the reticle on 3.5 magnification. I have seen other videos where it is lower left close to reticle centre. Can’t find anything in the manual about it. Also the second reticle you get when using the ballistic calculator won’t piss off after taking a shot. Any help would be greatly appreciated Thanks mate🇦🇺
Hi the lrf box is set from the factory, there will be a update coming soon that might change some features more to follow
Is the lrf removable?
no there is a non LRF model with the same internal spec.
Bom dia, tenho uma Alpex 4K e também lhe coloquei um suporte de IR na mira como o do filme. A minha pergunta é: qual o seu acessório de IR que pega nesse suporte? obrigado...
sorry not sure what you mean here with the ir ?
@@TheNightVisionShow Infrared Illuminator, obrigado
Sorry posted when I left unattended. Re-below question regarding moving reticle. On center reticle my Alpex 4K only moves back into middle of screen when zoomed into 7x mag plus? I have center reticle mode turned on.
Morning, even with centre ret on as it's a digital device it may be off on some rifles. could try change the scope hight or zero distance and let the bc do the rest of the work.
Hello just got the hik alpex 4k lrf and I did the firmware updates straight away through the app next to my scope, when I go on app all says up to date, you mention about clicking restore to save the firmware update ? Does restore not restore it back to the factory settings for if you was going to I.e sell it ?
Any help much appreciated
Thank you in advance
Mitch
hello, after every update you need to do a restore for the new firmware to take effect. it won't lose your zero info, but will clear the BC data so its worth taking note of that. and it will return all the settings to factory like OSD and smart ir etc
@@TheNightVisionShow okay thank you I did not know that, does it also reset the password for connecting to the device ?
Thanks
Mitch
Hi I tried to zero last night and run out of y going down I have medium sports match rings on when I thought about it had the ballistic calculator turned on would that impact me trying to zero
Thanks
Hi only if you was using the laser and the hold over marker, but normal zeroing it shouldn't effect it.
@@TheNightVisionShow thanks got sorted hadn’t fastened down the front mount properly can’t fix stupid
Hello! Mine just arrive yesterday, and today was my 1st day shooting. Whatever i saw that mine doesn t show that degrees on bottom and the right anywhere. Do i need to activate it Somewhere?
Thank you!
in the menu general settings it in there next to OSD,
I'm a bit confused about the zeroing profiles and using the ballistics function with them... From what you've said, you can choose A to E, and for each of these, assign a number 1 to 5 to each, so a total of 25 possible combinations, and each of these has a zero distance input. Fine so far. But say I want to set up my air rifle on profile E, and I use different pellets and or power settings. So I set up say E1 as 15gr low power, E2 as 15gr high power, E3 18 gr low power, E4 18gr high power and so on. If I then want to use the ballistic calculator, I'm limited to 5 total ballistic tables. Meaning that I can't really use the ballistics calculator with reticle profiles A to D (which would be different rifles) if I've used up the 5 tables with my air rifle ballistics on profile E? Is that correct?
Hi you can only have 5 BC tables set up in the scope. so can't have ( E1 as 15gr low power, E2 as 15gr high power, E3 18 gr low power, E4 18gr ) so could only have 1 set up on the bc or use all 5 slots on the bc for 1 ammo.
Love the text. Is it Cockney Geezer?😂 Seriously though, great and informative video.👍
Hi, Thanks for the comment glad you liked the video. keep your eyes out for Pt 2
I see you have yours set @ 20m range & moving the scope around quite a lot & the balistic x is not moving & stationary below the retical. Mine when zeroed with the sight @ 0° elevation it is central to the retical tilt it up or down 1° & the balistic curser moves up above the retical 0.8mm still @ 20m never did this before the .110 update even when i tried it @ 40m i can not get the balistic x to center on the retical it comes out 3.8cm above am totally at a loss with this .110 update was perfect with .88.
the hold over marker will move depending on the slope inline with the distance ranged.
I notice on this video that your firmware build is V5.5.81_240229! On mine it is V5.5.81_240202 but on the sight app it’s saying no updates? So is mine or others an older build? Or are we waiting for your build to be cleared for public use?
Thanks 🤩
Hi it a sample model and you have the current firmware. there are no updates out.
Can you move the lazer square ?
hi thanks for the comment no they are set from factory.
Hello dose’s this optic can handle shock from cal. 3006 .?
Hi yes had people using them on .270 7mm mags with no issues.
@@TheNightVisionShow thanks for information 🙏
It would be nice to be able to give the profiles names.
Hi, yes would be nice we will pass it up.
Nice little walk through. I initially put my speed in as fps unconverted to m/s. 😂 big boo boo for an air rifle 😂
Hi, yes very easy to miss something. dont rush it
Doing a restore put the scope back to factory settings
Hi, yes after every update a factory reset need to be done to let the new firmware take effect. worth taking a note of the X and Y before hand.
i thought it was you (dunno for sure )who did the sytong ht 60 review..i bought 1 because of your indept ,how to set it up etc ..and it is stil going strong..if it was not you sorry about that ..😀 p.s is this better ore the same as the pard ds 35 i thought?Both are way to complicated for me ..i stick to the sytong ht 60 ☺
Hi thats not us.
Hi your profile for setting up different rifles do have say A1 B1 C1 D1 E1 then your BC A1-1 B1-2 C1-3 D1-4 E1-5
Hi,Thanks for the comment. you are spot on I match my BC page to the profile.
divide your feet per second value by 3.281 to give metres per second
That's the one. can use a converter app or google also.
Whats price
Hi. They are £849.99www.scottcountry.co.uk/products/hikmicro-alpex-lrf-4k-digital-night-vision-scope
At 1259 you are in balastics saying 100mt but your zero is 20 mts ???
was only to explain each section. now with the 5.5110 firmware the bc take that zero distance from the zero distance set I.E A1-100
Dont you have to the bullet weight in
Not needed
Hi, dont need to as its works from the Bc and speed
BC, .... G1 or G7 🤔
the old version run a G1 profile. in the new update you have the option of G1,G7
cant hear it, volume is extremely low
strange all sounds good from our side ?
Reading the comments confirms my decision to retire from shooting.
? can we help clear any issues up ?
@@TheNightVisionShow No thanks, I'm 70 now and digitally challenged. I spent many years handloading various calibres with custom barrels and culled four figures worth of deer and fox. I used a thermal spotter in later years but stuck to an image intensifier on the back of my day scope for shooting at sentient creatures with a pulse. Just because the current tech savvy generation can work out how to operate a computerised device, it doesn't necessarily follow that they will have the fieldcraft experience or accuracy skills to operate the mechanical side of it. However, that's just my opinion. I believe I'm still allowed one, even under the current government. Good luck to all shooting folk, use it or lose it.
Just watched this , what a nightmare to set up!!!
Hi, thanks for the comment its really simple this video has helped so many people set there up.
The sound is AWFUL !!! Can you try again with a proper mic'.
Hi there is nothing wrong with the sound. we use high quality recording equipment. there are also subtitles provided. hope you enjoy the video.
@@TheNightVisionShow Hi there, sorry but there really is a sound issue from your end on this vid', its unfortunate, because I want to understand the Hik Alpex 4k lrf before buying one.
I have tried on another system, but the result is the same, very muffled. Can you look into this, thanks.
@@jamesbowskill362 Feel free to give Scott Country a call on 01556 50 3587 and they team will be pleased to help.
I am the law