You did a great job explaining about exhaust problems! Sent this to my Grandson who has zero knowledge of 4 cylinder exhaust systems and you nailed it for him. Thanks for the great video!
Great video and right to the point. My truck was recently diagnosed with a leaking exhaust manifold and I'm suspecting that it is the cause of some of the issues I've been having with it. Loss of power, stumbling, exhaust fumes getting into the cab, occasional burnt smell, ticking noise, and intermittently the front end will shutter on acceleration as well as sputtering while idling. I was suspecting that maybe the O2 sensor is being thrown off but there has never been any codes or stored codes.
You nailed my problem my Man. My Jeep had all those problems . The screws on my manifold were all loose. All I did was tighten them. Fixed the problems. Thank you
I noticed a glimmer of humor in your eyes when you started talking about bolts breaking. This leads me to believe you have personally experienced this nightmare! :D
God bless you bro. My 2012 Silverado 280k started getting sluggish and randomly would feel sluggish. It wouldn’t rev high and wouldn’t go fast until warmed up. I had 1 rear bolt missing in the exhaust and now I have the front one as well and it’s bad lol especially on cold start sluggish and loud tick. Warms up and it’s gone basically. Thanks boss you just confirmed it for me. Gonna take it to get the bolts removed and all replaced
You're the man! Thanks for sharing your wisdom with us. Well said. Clear and to the point. Grateful for helpful people like you who make the world a better place.
I will say great explanation on this it's all the correct common symptoms and most think it's lifters when it's just a leak but people need to know that backpressure is never good. That is not a thing. Pressure back into your motor... especially a turbo is horrible for your engine. Cats are the most restricted part of the exhaust. I have a 16 silverado and it's all done up but I have headers and straight pipe with no cats to a flowmaster dump muffler and the truck has never had so much power. Airflow is good. The reason this will hurt power is the airflow is disrupted and cannot flow quickly as it should
Found your video very helpful and useful lots of good information thanks for sharing this I’m going through everything you said with my 86 Chevy thank you
Thank you. Hopefully, the tapping noise is from the exhaust manifold. It has tapping sound driving from a cold start. It continues (or at least noticeable) while driving between 20mph to 65mph. There is also that high pitch noise somewhere. The fuel pump seems to be (or hopefully) okay since I can hear it on startup or cranking to start the engine.
I was thinking my 5.3 L was suffering of a oil elevator issue or rods but I noticed as soon the engine warms up! The tapping noise goes away! And I noticed some exhaust manifold bolts are broken. It will cost me $1000 dollars to fix the problem but is better than opening the engine.
Would an exhaust manifold gasket leak cause a p0420 code? I have a 2017 Transit Connect. Symptoms are, ticking noise at cold start up & seems to subside once engine is warm. Light sputter to hesitation when accelerating to maintain speed. Reduced fuel mileage also. Thanks for any input. Also seems to lack power at times. I can get up past 40 mph just fine which makes me believe the cat may still be good.
Thank u for this ..i bought a chevy sonic with a bad gasket at the bottom is where the smoke was coming from before it disappears and it was also coming thru the vent also
Hi, nice video, i have a toyota celica 2001, i had to get a new cat fitted because it snapped at weld, it was premium 1, anyway once it got fitted the mechanic mentioned that they had to use a different gasket because the 1 that came with new exhaust didnt quite fit, so i got car back and was driving about 3 weeks to a month and it started to struggle on acceleration and i got check engine light, i checked the codes and its reading p0420 and p0303, im scratching my head because there hasn't been any problem with car until exhaust was changed, so i bought a new 02 sensor as it mentions bank1 in the code info, but now im reading it could be down to a exhaust leak, which makes me think, its because of that gasket they used or its not been fitted tight enough, i just wondered if this was a possibility, could this cause these both codes to come on, when it idles theres like a sputtering noise from exhaust at back, but unsure if thats just because it had been sitting for the the last week. Would really appreciate your insight, thanks.
Great explanation and video, thank you..One thing i didnt hear you say is engine misfiring. Can exhaust leak cause misfiring with p0300 random multiple cylinder misfire? Thanks, if anybody can give me some advice i would highly appreciate it. Its a 2004 ford taurus if that helps any.
I have a 2015 Ford truck. Mechanic said that all the manifold bolts are rusted real bad and one of them is leaking. The sound of loud like a the fan turning the motor almost like if you're in your truck and hear lawn mower running outside the vehicle like lawn Care. Will this hurt the truck to be driven for like 2 weeks
What if your O2 sensor check engine light came on for a day and then went off…? Could I assume that it was something that just was passing through? I haven’t experienced any of those other symptoms you mentioned, so I am tempted to just wait it out and see.
I could see traces of oil at my engine wall passenger side,from the exhaust gasket area going to the cylinder head ..pls why is there oil lesking from there and also exhaust smokes blue snd i smell it in cabin,cabin gets hot,body of car sweats internally.like body of chassis.....sfter tsking off the seats,the trunk is hot ...could this be from exhaust leak from gasket.....02 error codes are being stored always,loss of oil...
I’m also having my engine coolant go down but no visible signs anywhere even during a compression test kit being used could this also be the cause? At start up I have the rattling/ticking noise for sure plus mild/heavy smoke coming out of the exhaust with e peculiar smell like it’s burning the coolant but I haven’t been able to verify this yet.
Hi brotber , would an underboost p0299 error ? My car boosts fine when the engine is cold but once the engine gets warm i lose boost i also see some light smoke come out the bonnet when i stop at the lights sometime
Hi i have noise in my car that sounds like a exhaust leak while i'm driving or the car is in gear. When its in neutral its no sounds at all and it sounds normal again. Do you know what it could be?
Sounds like what I’m experiencing on my car. I hear squeaking/chirping only when I’m stepping on the gas pedal gently especially when I’m maintaining my speed. But when I put it in reverse or neutral, and I step on the gas pedal, there’s no noise.
I just finished rebuild my engine it's 2004 volvo.xc90 T6. cylinders numbers passenger side 1-2-3-4-5-6 , I started first time today and started but immediately there were misfire on 3-4-5 and exchuast smoke leak coming from manifold just behind 3-4-5 can someone tell the misfire is from the exhaust leak please before I go crazy stright to mental hospital 😢.
@Top5AutoRepairs the reason I asked that it's because I saw the same case in front of me in the past large exhaust leak + random misfire like mine and the guy fixed the leak then the misfire was gone immediately. However I will do compression test on 3-4-5 before I tighten the bolts and nuts where the exhaust leak is I don't want to waste time doing the exchuast leak fix and then it turns to be like you said that the head wasn't tourqe correctly . is this the correct path ? Oh I just loosing a bolt on the manifold by cylinder 3 and the misfire got worse .
Wow compression test done but nit makes sense it's shows 65 on all cylinder but I have the misfire only 3-4-5 🤦 why would the ECU choose to show the misfire only on those , I deleted the codes many times to see if it would change but everytime I start the car it would show the misfire there only .
Update : I had a tip from volvo specialist he told me to redo the timming again he said when all cylinder read low compression same equal number is an evidence of jumped belt or incorrect timming, I looked at the timming marks I see the exhaust mark is off by 1 tooth.
If you put an air hose in the tailpipe with a cap that's relatively air-tight, should it be able to hold some pressure if there are no leaks at all? Could this be a diagnostic method? Thanks.
I have a 2015 Ford truck will it hurt the motor to drive it like it is one of the bolts are rusted and broke the mechanic said that all of the bolts are rusted bad
@@Top5AutoRepairsmy 96 Ranger 3.0 is clicking fast and I reved up to 3k rpm for a little bit and the noise went away then came back then tried 2500 Rpms it stops and starts once I let off the gas what could my problem be? Thanks
When stepping on the gas pedal, and especially when I’m maintaining my speed, I hear a chirping/squeaking noise either in the dashboard or engine bay. But when I put it in neutral or reverse, and I step on the gas pedal in the same manner, there’s no noise. Any idea what this could be?
@@greendholia5206 the squeaking noise was from the worn engine (front and rear) and tranny mounts. The way I see it, in other cars, you’ll get vibrations all over the engine bay. But my car, for whatever reason, squeaked due to bad mounts. To be clear, I didn’t replace the serpentine belt nor tensioner… just the mounts
Is this common for a 2015 Nissan Sentra for a p0101? I already changed the air flow sensor 3 times. And I keep getting the same code. Please let me know
Will it cause a rough engine idle ? Also will cause to the engine to choke a bit when start up or while running. I have a leak and my rpm’s are jumpy at red lights.
Hi I'm not this mechanic but I can answer your question. If there is a leak upstream of the O2 sensor, the sensor may detect excess oxygen in the exhaust and tell the car's computer to compensate by adding more fuel to the mix, because normally this would be a "lean" condition (not enough fuel in the mix). This can cause a rough idle especially at low RPM or when initially accelerating. A lean condition is more dangerous for the engine than a rich condition so the compensation is intended to protect the engine even if it causes rough running.
the heat shield on my exhaust manifold is cracked right where the bolt is, is this something I should be concerned about? It seems it just has a crack/hole on the shield, but the actual manifold looks intact
You did a great job explaining about exhaust problems! Sent this to my Grandson who has zero knowledge of 4 cylinder exhaust systems and you nailed it for him. Thanks for the great video!
Great video and right to the point. My truck was recently diagnosed with a leaking exhaust manifold and I'm suspecting that it is the cause of some of the issues I've been having with it. Loss of power, stumbling, exhaust fumes getting into the cab, occasional burnt smell, ticking noise, and intermittently the front end will shutter on acceleration as well as sputtering while idling. I was suspecting that maybe the O2 sensor is being thrown off but there has never been any codes or stored codes.
You nailed my problem my Man. My Jeep had all those problems .
The screws on my manifold were all loose. All I did was tighten them. Fixed the problems. Thank you
I noticed a glimmer of humor in your eyes when you started talking about bolts breaking. This leads me to believe you have personally experienced this nightmare! :D
God bless you bro. My 2012 Silverado 280k started getting sluggish and randomly would feel sluggish. It wouldn’t rev high and wouldn’t go fast until warmed up. I had 1 rear bolt missing in the exhaust and now I have the front one as well and it’s bad lol especially on cold start sluggish and loud tick. Warms up and it’s gone basically. Thanks boss you just confirmed it for me. Gonna take it to get the bolts removed and all replaced
You're the man! Thanks for sharing your wisdom with us. Well said. Clear and to the point. Grateful for helpful people like you who make the world a better place.
I will say great explanation on this it's all the correct common symptoms and most think it's lifters when it's just a leak but people need to know that backpressure is never good. That is not a thing. Pressure back into your motor... especially a turbo is horrible for your engine. Cats are the most restricted part of the exhaust. I have a 16 silverado and it's all done up but I have headers and straight pipe with no cats to a flowmaster dump muffler and the truck has never had so much power. Airflow is good. The reason this will hurt power is the airflow is disrupted and cannot flow quickly as it should
Found your video very helpful and useful lots of good information thanks for sharing this I’m going through everything you said with my 86 Chevy thank you
Thanks for the info I've been having problems similar but I'm hoping it's in the first pipe off the manifold.
Thank you. Hopefully, the tapping noise is from the exhaust manifold. It has tapping sound driving from a cold start. It continues (or at least noticeable) while driving between 20mph to 65mph. There is also that high pitch noise somewhere. The fuel pump seems to be (or hopefully) okay since I can hear it on startup or cranking to start the engine.
I was thinking my 5.3 L was suffering of a oil elevator issue or rods but I noticed as soon the engine warms up! The tapping noise goes away! And I noticed some exhaust manifold bolts are broken. It will cost me $1000 dollars to fix the problem but is better than opening the engine.
Would an exhaust manifold gasket leak cause a p0420 code? I have a 2017 Transit Connect. Symptoms are, ticking noise at cold start up & seems to subside once engine is warm. Light sputter to hesitation when accelerating to maintain speed. Reduced fuel mileage also. Thanks for any input. Also seems to lack power at times. I can get up past 40 mph just fine which makes me believe the cat may still be good.
Yes it's possible
wow my exact symptoms thanks so much chief salute
Very interesting and helpful information. Can you make a video why engine burns brake fluid? Thanks.
Interesting topic
@@Top5AutoRepairs haha
Man this video was soooo helpful I swear thank you very much bro
Amazing job explaining this! Thank you.
Thank u for this ..i bought a chevy sonic with a bad gasket at the bottom is where the smoke was coming from before it disappears and it was also coming thru the vent also
Hi, nice video, i have a toyota celica 2001, i had to get a new cat fitted because it snapped at weld, it was premium 1, anyway once it got fitted the mechanic mentioned that they had to use a different gasket because the 1 that came with new exhaust didnt quite fit, so i got car back and was driving about 3 weeks to a month and it started to struggle on acceleration and i got check engine light, i checked the codes and its reading p0420 and p0303, im scratching my head because there hasn't been any problem with car until exhaust was changed, so i bought a new 02 sensor as it mentions bank1 in the code info, but now im reading it could be down to a exhaust leak, which makes me think, its because of that gasket they used or its not been fitted tight enough, i just wondered if this was a possibility, could this cause these both codes to come on, when it idles theres like a sputtering noise from exhaust at back, but unsure if thats just because it had been sitting for the the last week. Would really appreciate your insight, thanks.
Great explanation and video, thank you..One thing i didnt hear you say is engine misfiring. Can exhaust leak cause misfiring with p0300 random multiple cylinder misfire? Thanks, if anybody can give me some advice i would highly appreciate it. Its a 2004 ford taurus if that helps any.
Dude you are the best video ever keep it up and thank you
Very well made video. Thanks
Thank you so much mate…thats helped me immensely…you sir are a Legend 👊🏼
Vw 2001. Bolts broke off my exhaust that connects to engine. Should I take it to muffler shop and fix w old exhaust or buy new exhaust
Will there be a scrapping type sound while accelerating??
There shouldn't be any scraping noise. Maybe the heat shield is loose and scraping against the exhaust manifold?
@when ever I hit the gas I hear almost like a hissing type sound. And you only hear it when your driving you won’t hear it when idling.
Excellent explanations 🇦🇺🦘☮️
Excellent this video helps me a lot!
Thank you so much! 👍🏼👍🏼👍🏼👍🏼
Will this cause white smoke when the car is at running temp
Appreciate your time 🤝
This was good info.
My suv as all off this except for the smoke and it makes a turbo whine sound but just on cold starts. Does a bad exhaust manifold make this noise?
I have a 2015 Ford truck. Mechanic said that all the manifold bolts are rusted real bad and one of them is leaking. The sound of loud like a the fan turning the motor almost like if you're in your truck and hear lawn mower running outside the vehicle like lawn Care. Will this hurt the truck to be driven for like 2 weeks
Thank you friend
Thanks alot...you answered every question I had👍
You're welcome
Can it cause backpressure in the radiator?
Is the this expensive to fix?
Very usefull, thank you
What if your O2 sensor check engine light came on for a day and then went off…? Could I assume that it was something that just was passing through? I haven’t experienced any of those other symptoms you mentioned, so I am tempted to just wait it out and see.
Replaced your spark plugs ignition coils injectors and fuel pump assembly same time easy fix.
What does it mean when you hear a high pitched whistle.
I could see traces of oil at my engine wall passenger side,from the exhaust gasket area going to the cylinder head ..pls why is there oil lesking from there and also exhaust smokes blue snd i smell it in cabin,cabin gets hot,body of car sweats internally.like body of chassis.....sfter tsking off the seats,the trunk is hot ...could this be from exhaust leak from gasket.....02 error codes are being stored always,loss of oil...
I’m also having my engine coolant go down but no visible signs anywhere even during a compression test kit being used could this also be the cause? At start up I have the rattling/ticking noise for sure plus mild/heavy smoke coming out of the exhaust with e peculiar smell like it’s burning the coolant but I haven’t been able to verify this yet.
sounds like a blown head gasket, what color is the smoke? check oil dipstick for milkyness
Thank you man!
I have a feeling you were smiling at the end cuase you know how hard it is to take does bolts out. 😂😂😂😂
Hi brotber , would an underboost p0299 error ? My car boosts fine when the engine is cold but once the engine gets warm i lose boost i also see some light smoke come out the bonnet when i stop at the lights sometime
thank you!! great video
Does it have same sound on a diesel that has a bad manifold?
Hi i have noise in my car that sounds like a exhaust leak while i'm driving or the car is in gear. When its in neutral its no sounds at all and it sounds normal again. Do you know what it could be?
Sounds like what I’m experiencing on my car. I hear squeaking/chirping only when I’m stepping on the gas pedal gently especially when I’m maintaining my speed. But when I put it in reverse or neutral, and I step on the gas pedal, there’s no noise.
lifter needs adjust maybe
I subscribed and liked this tutorial.
I just finished rebuild my engine it's 2004 volvo.xc90 T6.
cylinders numbers passenger side 1-2-3-4-5-6 , I started first time today and started but immediately there were misfire on 3-4-5 and exchuast smoke leak coming from manifold just behind 3-4-5 can someone tell the misfire is from the exhaust leak please before I go crazy stright to mental hospital 😢.
Hello. Exhaust leak do not cause misfire in most cases. Most likely the cylinder head wasn't torque properly. Please conduct a compression test.
@Top5AutoRepairs the reason I asked that it's because I saw the same case in front of me in the past large exhaust leak + random misfire like mine and the guy fixed the leak then the misfire was gone immediately. However I will do compression test on 3-4-5 before I tighten the bolts and nuts where the exhaust leak is I don't want to waste time doing the exchuast leak fix and then it turns to be like you said that the head wasn't tourqe correctly . is this the correct path ?
Oh I just loosing a bolt on the manifold by cylinder 3 and the misfire got worse .
Wow compression test done but nit makes sense it's shows 65 on all cylinder but I have the misfire only 3-4-5 🤦 why would the ECU choose to show the misfire only on those , I deleted the codes many times to see if it would change but everytime I start the car it would show the misfire there only .
Update : I had a tip from volvo specialist he told me to redo the timming again he said when all cylinder read low compression same equal number is an evidence of jumped belt or incorrect timming, I looked at the timming marks I see the exhaust mark is off by 1 tooth.
How far back on the exhaust Can a leak be?
how bt the dreaded po446? manafold leak??
Thankyou bro
If you put an air hose in the tailpipe with a cap that's relatively air-tight, should it be able to hold some pressure if there are no leaks at all? Could this be a diagnostic method? Thanks.
Hello, if the manifold is not crack and I don't hear any bad noise but I smell fumes inside the vehicle can be just a bad gasket?
Could just be an exhaust leak from the pipe itself?
I have a 2015 Ford truck will it hurt the motor to drive it like it is one of the bolts are rusted and broke the mechanic said that all of the bolts are rusted bad
Would you get a p0171 code from this
You can't
When pressing the accelerator, there’s a loud rattling noise, what can that be?
You have a rat under your accelerator pedal.
Your catalytic converter may be breaking apart inside.
cracked flexplate maybe
can this cause engine overheating btw;2012 dodge charger sxt plus
doubt it
How long does the job take to replace this Exhaust Manifold?
It depends on the vehicle. Average between 1-3 hours.
Dodge Durango 08?
Could it be bad if the "clicking" is there all the time and gets louder with throttle under load
Yes
@@Top5AutoRepairsmy 96 Ranger 3.0 is clicking fast and I reved up to 3k rpm for a little bit and the noise went away then came back then tried 2500 Rpms it stops and starts once I let off the gas what could my problem be? Thanks
Will it cause the engine to sputter? Appreciate your video!
Yes it can due to reduced/lack of back pressure
@@Top5AutoRepairs Thank you! I found all of your videos are very informative.
Where can I find a new alternator for my car I try every auto parts store they discontinued
Rebuilding the alternator is the next option
👍🏼 good mechanic.
It was useful 👌
You can always do the old shop vac blowing up the tailpipe trick with a soapy water spray bottle
How straight is the exhaust manifold supposed to be on the gasket mating surface?
Extremely straight. Any irregularities are very bad.
Will smoke come out the rear exhaust ? Especially upon revving
Thanks
Thank you
When stepping on the gas pedal, and especially when I’m maintaining my speed, I hear a chirping/squeaking noise either in the dashboard or engine bay. But when I put it in neutral or reverse, and I step on the gas pedal in the same manner, there’s no noise. Any idea what this could be?
Slipping belt?
@@Red5dJedi0 yeah I just bought an oem belt and will probably buy a new oem tensioner assembly as well
@@Red5dJedi0 yesterday I had my mech replace the front and rear engine mounts and tranny mount, all OEM. Squeaking is gone!
So it was the belt or the mount?? How did the mount cause acceleration sounds?
@@greendholia5206 the squeaking noise was from the worn engine (front and rear) and tranny mounts. The way I see it, in other cars, you’ll get vibrations all over the engine bay. But my car, for whatever reason, squeaked due to bad mounts. To be clear, I didn’t replace the serpentine belt nor tensioner… just the mounts
A manifold exhaust leak can cause engine to run Rich?
yeah
I have a striped bolt on my header and it's ticking
Is this common for a 2015 Nissan Sentra for a p0101?
I already changed the air flow sensor 3 times. And I keep getting the same code.
Please let me know
Did you check air filter..... the code indicates a restriction somewhere
Will it cause a rough engine idle ? Also will cause to the engine to choke a bit when start up or while running. I have a leak and my rpm’s are jumpy at red lights.
Hi I'm not this mechanic but I can answer your question. If there is a leak upstream of the O2 sensor, the sensor may detect excess oxygen in the exhaust and tell the car's computer to compensate by adding more fuel to the mix, because normally this would be a "lean" condition (not enough fuel in the mix). This can cause a rough idle especially at low RPM or when initially accelerating. A lean condition is more dangerous for the engine than a rich condition so the compensation is intended to protect the engine even if it causes rough running.
Men I did smoke test I don’t see shit intake or exhaust or the same sytemon
Enjoy the holidays!
You too!
I got all of this except a code
Did you ever figure it out?
@RIPdBOON hell nah😩 i just ended up selling the mf. The guy I sold it to got into a police chase with it less than a week later.
@@BXBadmonNY lmao that's wild bro
Best video
i like how you try not to smile while saying to use wd40 or a torch to loosen bolts cus you know how terrible it can be
the heat shield on my exhaust manifold is cracked right where the bolt is, is this something I should be concerned about? It seems it just has a crack/hole on the shield, but the actual manifold looks intact
Thanks for the knowledge, very good to know, sub for more vids