The Sony a9iii Flash Sync Speed Problem and Solution

If you have trouble getting your Sony a9iii to sync with your flash at higher than 1/500 shutter speed, watch this video.
#sonycamera #a9iii #sony #camera #flash #flashphotography #sonyalpha

[@markkuautio7831]

You have to Use Sony flash and have to upgrade you flash firmware to v.2.0 and then you can use TTL it to 1/80 000s. Works perfect.
You flash photography go easy. You can choose availybly light to shutter sppeed then use to flash TTL. You get superb result very easy.
I think at Godox put to new firmware and then it works too.
I have many Godox flash too put Sony flash haves much pleasing skin tone.
I now at Sony flash is much more expensive, but if you want to best result then you hav them.
I have trade all my godox flash and buy two more Sony flash.

[@renestaempfli1071]

Yes, I have 3x HVL-F60RM2 and an A9III. All other flashes are to dumb to understand the flash protocol that SONY uses. SONY also uses a dedicated processor in these flashes to handle the flash protocol. They work in TTL and Manual mode. I prefer the manual mode, as it allows you to adjust and match the flash power individually , when using them all together. You even save some energy, as you don't need the first flash as in TTL. You can also display and change all the settings in camera. You can go as low as 1/256 energy, 1/80000, F/1.8, ISO 250 and Hi+. It works perfect. No fiddling. Just switch it on and start shooting.

[@nyambe]

Does it work on Manual on any flash? without TTL

[@Rocky-AR]

1/500 is the highest speed with TTL on except for the F60 II and F46 with firmware v2.0