Tesla Valve | The complete physics
Вставка
- Опубліковано 28 кві 2024
- Nikola Tesla had invented a very interesting one-way value. I hope you will enjoy details of invention and the way his mind worked. Your support is needed to keep this channel alive - / lesics Cheers Sabin Mathew
LinkedIn : / sabin-mathew
instagram : / sabinsmathew
Twitter : / sabinsmathew
Telegram : t.me/sabinmathew
FB : / sabinzmathew
Voice over artist : www.fiverr.com/voiceonthemove
ua-cam.com/video/ozFBsMyyDSE/v-deo.html - Here is a simple experimental demonstration of the Tesla valve. Some people have casted doubt about its effectiveness. Trying to understand the Tesla valve and Nikola Tesla's mind was a real fun. Thank you for the love :) Your support is needed to keep this channel alive - www.patreon.com/Lesics Cheers Sabin Mathew
Thanks for the time of your's, it was more then just helpful
can it create vibrations due to vortices generated in divergent flow?
I think you over estimated the amount of steps Tesla would have taken to developing this. It is trivial to realize that forcing fluid back on itself will cause a high reduction in flow. To me it seems the first step would be to start with a series of the lobes that we see, then adjust the angles between them to be optimal, rather than what was displayed in the video.
Granted, your intent may have been to demonstrate the way a modern engineer would approach the problem, which would have been fine had you not portrayed it as Tesla's design process.
I'm actually considering to use it in a work application. Could someone help?
The thing is, we have a centrifugal pump with DN70 inlet, sucking fuel from a tank. But we also need to create pressure in front of it, using a specific gear pump. We tried using conventional one way valves to keep gear pump from just sending fuel through a loop, but it ends up just closing them and suffocating the centrifugal pump.
Will Tesla valve work in this scenario, when you have a flow going one direction, but pressure is coming from the other one. Seems kinda impossible when put into words, but I hoope there's someone here, who can help
What happens with superfluid if you use and expansion chamber between two of those valvular conduits ? Would superfluidity prevent the turbulence or not?
Some one need to test this, cause we will soon realise Space might actually be superfluid ocean in wich planet floats.
An article published on September 21st 2020 from Lancaster teach us object in superfluid helium act as thought they are in a vacuum.
Never thought Nicola Tesla would have had anything to do with fluid mechanics
It is kinda common for genius scientist to work in various areas, it's just usually they impact certain field of study so much, that it overshadows their achievements in other fields, which are remarkable by themselves
Electricity is kind of similar to fluid, except it's the electrons which are flowing instead of atoms.
@@snowblazed3442 i'm pretty sure you can't create a tesla valve equivalent with wires =v however i'm a software engineer so my knowledge in the matter might be limited
Fluid and electricity both take the path of least resistance.
@@dtom2126 hmm so every secondary flow could be wires from a higher resistance than the ones used for the primary flow ? =o Now it actually seems plausible
I was in the middle of nowhere and ended up here. Hence I watch this glorious video till end
Same here
I was watching a video about China. Suddenly, I was learning about the Tesla Valve. I feel smarter
Here I am too
@@whith5184 I was watching a Japanese candy making video!
Same here
Something not mentioned in this video is that alongside the mentioned flow restrictions of the Tesla valve, after the first switchback the "main" flow will be directed towards the next switchback each time. It doesn't appear to be an even split into primary and secondary.
taking it step by step was very helpful, thanks
When you say "let's see it work" pretty sure everyone was expecting a real life version. You can make anything happen with computer animation
Can you show the difference of water speed in a valve? It's an animation based on laws that are accepted. Like animating an object falling because we know gravity exists. Jesus
@@lick28 His point was that you can animate anything. You can animate the valve breaking from excess pressure. You can animate an anvil falling on it. You can animate glitter coming out of the other end. You can also animate generally accepted "laws" in the logic of children's cartoons but that does not make them real nor evidence of any kind of "laws". And yes, you can show the difference of water speed in a valve. Today we have plastics and glass to make small scale low pressure valves. We also 3D printers and pressure gauges. I am surprised that a reasonable person would suggest that the only way to demonstrate how a valve works would be through computer animations. Because we all know the significance of computer animations when Nikola Tesla made the valve in question...
@@guywiththebottle and my point is that there's no reason to make up anything false. It's also much easier to just animate something we know to be the effect of a certain action than to go out of our way to waste physical resources like water and money. It's also easier to articulate how the inner workings of something goes in an animation as you can highlight the important things to be noted. Complaining about the fact that it's animated in this context seems very nitpicky
@@lick28 There is reason to make up something false if you can get away with it or do not know better. People care about 'fake news' more than ever and everybody is the publisher on youtube. The guy asked for another reason to believe the premise of the video. If people know the effect of "a certain action", there wouldn't be a point to making the video. Is it a waste of physical resources to teach people about valves? You can highlight whatever you want in an animation, that was the point of the critique. Not sure why it would be nitpicky that the guy expresses that he would be more convinced by a recording of a stream of water rather than a simulation of a stream of water.
@@lick28 We live in 2022 and you really wanna say theres no reason to make up anything false? The dudes right, I wanted to see it for real. I dont want what he thinks will happen in an animation, I wanna see what does happen in reality.
The interesting thing about this apparatus is that the reduced flow from the output side is fairly consistent no matter how much pressure is on the input side. It's not adjustable but this would have applications where someone would need a relatively stable volume of liquid flow regardless of the changing input pressure. I think that is the real purpose of this valve, not so much being a one way valve.
its a solid state oscillating pump, remember he was working on pumps
I wonder if there’s a lower threshold whereby if the input is slow enough, the various divergences and vortices are minimised, therefore the the output would be increased compared to if you had a higher input (which would seem to create more restrictive flow?)
@@oscarwoodly7392 i was wondering the same, anyone got answers?
There's probably a fairly linear relationship between input pressure and output volume.
I think you are right. It’s a simple and robust way to meter something using higher pressures elsewhere. It really can’t stop flow because it relies on the dynamics of flow to even work.
2:40 the two hoses' streams colliding made me laugh so hard for some reason. Great vid and explanation
This is quality reminding me of old educational videos. Simply superb!
TESLA: I used the pressure to destroy the pressure.
He used the pressure of the pressure to pressure the pressure of the pressure.
He pressurised the pressure to make a big pressure which gives pressure to the pressure which gives enough pressure to crush anything but P R E S S U R E
@@pikachu-jf2oh ua-cam.com/video/a01QQZyl-_I/v-deo.html
@@elephantgrass631 ua-cam.com/video/iuanQzuVvW0/v-deo.html
@@pikachu-jf2oh ua-cam.com/video/q9BtYEnrkg4/v-deo.html
"Tesla's valve is dangerous, immoral, illegal and nefarious!"
---- Thomas Edison
" ... But ...WHY?? Is it because YOU didn't think of it??!!!!" - Nikola Tesla
@@Hey_MikeZeroEcho22P "Heh, Nicky,....wanna work for me, instead of that Edison guy?"
---- George Westinghouse
@@stevelangstroth5833 NICE! I wish I knew how to reply to that one!!! I'm assuming he that Tesla said, "no".
Edison: I'll prove it by drowning an elephant with it.
Went straight to comments looking for Edison to take credit for this...
The ring style is neat for flow to specific areas as well port to port shaping.
this is so interesting. watching the flow of water has always intrigued me. whether being the oceans waves, my shower drain, rivers and streams, or how it looks with vibrations.
Well I'm suprised the video does not show an actual water test.
Yes, showing actual fluidic components and models would be helpful for understanding. Notice the pulsing, as this is not only a partial diode but a partial fluidic oscillator.
May be they don't have a wood or metal worker? Animations worked well enough as even if you could see though a plexiglass face, due to the valve slowing the flow, you could not see the direction of the water flow. This would then need animations of arrows again.
What I would find interesting is more mathematical information. How long, at what diameter, fin size, and liquid pressure going into.
That would substantially increase production costs. You might be able to get someone like William Osman to do a video fabricating and testing a Tesla valve.
@@davilathegreat not really. A cnc can cut out one for very cheap, and would have elevated the video above ufo sightings videos. You know, animations are costy as well.
@@Tiriris They are obviously working from an animation studio. It might be cheap for youtubers who perform on-screen, but that requires a whole new set of equipment and staff.
Very cool! Thanks for sharing and great animation too
Another great animator..
Oh lol
I am a fan of yours too! 😀
Are you going to make a video on how this valve is made?
Why u are not getting a check mark
A very helpful video! Thank you for explaining this.
I knew about this valve but had no idea the modern applications that use it. WONDERFUL
Also the primary flow in tesla valve isn’t a straight line. For every section of the “bucket” structure the primary path is tilted so that it matches the entrance of the next bucket structure, so making is very effective at dividing the primary flow into a secondary flow that opposes itself
2:24
Guy: “You guessed it!”
Me: What the heck are you talking about?
😂😂😂😂😂😂😂😂😂😂 I swear I had the same concern.
Its like Dora the Explorer asking you if you see some abstract concept and needs you to click on it.
LMFAO
@@-weaponized6493 it all seems so USEHOWNOWFULL... (Starchildtroo) per? WOODULIIK2KNOMOREEESSSSSPLZ.
Yes, I was thinking the opposite effect would occur.
This video reminds me of another old-school video about car differential. Another masterpiece.
As a 20 year master plumber I love the design due to it not having any mechanical parts that could fail for a pressure reducing valve this would be great
Big brain takeaway: Tesla Valve is not a check/one way valve, it is a regulator. Edited
Yes.
There are no moving parts he said, but you have to turn the whole thing around for to make it work.
@@Drottninggatan2017 Ridiculous right
@@Drottninggatan2017 I think not exactly... the Tesla's Regulator works the same way as an one-way valve, but instead of completely blocking the current, it supresses its flow. In the example of the video, the mecanism just had to be turned around because there was only one current to flow through it.
So basically a diode?
@@Drottninggatan2017 Just like any other one way valve, the purpose is to restrict fluid to only travelling in one direction, and not the other. Your comment is meaningless.
That man was a genius for creating things that are even used today.
Like light bulb
@@rohanreji5440 that was Edison.
Yes, like an alternating current, which revolusionized electricity in our world and more inventions through it. I admire this person, it's amazing what he did.
@@RandomYT05_01 Edison did not invent the lightbulb, he just improved in it.And it is possible even that was not his own work.
tesla was working under edison.
edison told tesla that he will give him 1000$ if he can improve the running time of a lightbulb to 10mins.
Tesla improved the running time to a time where the lifespan couldnt be tested in a few days.
when he wanted to receive his 1000$ edison basically told him to fuck off. after this tesla left the company.
so tesla only improved the lightbulb but from a few seconds to a time that made them usable even 100 years later.
thats also why the lightbulb is patented by edison, because he owned the researchcompany
Awesome Explanation of the excellent concept. I'm interested in doing a CFD simulation of this valve after watching this video.
The first video that i watch on UA-cam this day is about game, than in the middle time i found my self this incredible video in my recommended video, UA-cam recommendations is really something
That was really nice, please show more of tesla inventions
Fluid dynamics is a very interesting and very complex field and has an impact on so many day to day things that we take for granted. Tesla was a true engineering genius.
hmmm
Like the valves and vessels of our blood.
A visionary, certainly. A showman , definitely. A genius, I think not.
@@mikekelly5869 I bet you are so much smarter than he ever was 😏
@@laernulienlaernulienlaernu8953 That's a stupid comment. Tesla is a cult in the US and much of what's attributed to him is mythical. Whether or not I'm smarter than he was is irrelevant. The fact is that Tesla was a talented engineer but was not a physicist of any great ability. His achievements are greatly overstated and the hyperbole in this video is both incorrect and pathetic.
I wonder if the Tesla valve can be used as a muffler or a silencer to minimize sound wave travel…
It can but it's not as well since water and sound are way too different. Sounds can go through objects as well while water can't. That's why there are specific materials used to lower sounds such as foam.
This is such a beautiful and elegant solution. We lost such a brilliant mind when we lost Tesla 💔
Water: flowing peacefully..
Tesla: No..we don't do that here..
So this valve can only reduce pressure and not completely stop the flow of liquid.
So complete stopping of water without moving parts still is impossible
As he said increase the patterns to increase resistance..... So , maybe add a loooong Tesla valve?
KILLER DROID it will never go to 0
> So complete stopping of water without moving parts still is impossible
It is possible, use a gradient/slope.
Be a liquid my friend
Just close the tap kid
Nicolas Tesla a big gifts from the universe.
I like that one can specifically use the small throughput to one's advantage
So he created a one way valve that doesn’t stop water one way just “drastically reduces its flow”, brilliant!
And what have you done?
@@andrequimpo9363 What a ridiculous statement.
@@timprescott4634 No, he pointed out that the critique is ridiculous, because completely stopping the flow is not what this invention is about. Knowing the most efficient way to reduce flow rate is in many cases exactly what's needed. Also with enough loops you can get a almost coplete seal. Not having 100% efficiency does not reduce the usefullness of this invention.
@@palodoxaliqua5809 No, he didn’t. Had he done that I wouldn’t have said anything. He just punted to the intellectually bankrupt, “What have YOU done” reply which is RIDICULOUS.
@@timprescott4634 really? My reply is more ridiculous than the one who sarcastically said the invention just reduced the flow is brilliant?
The teaching method is excellent. Tesla valve is remarkable.
One of the very best demonstrations I've ever seen on UA-cam, and short and sweet just enough for my attention span.
Actual conversation with my wife:
What are you watching?
Something about valves
Why?
I don’t really know but I want to know how it works
What it’s for?
I don’t even know. But I feel like I’ll know everything about valves soon.
Agreed. I was surprised by the 4k+ dislikes. Perhaps it was from people unable to understand the video... or maybe they are just Edison fanboys 😜
Claiming to be a “total physics” video without demonstrating a real world model of such a simple device is a fail. The simulation software is fine but not a complete picture.
Also this valve is crap under any appreciable pressure. You’d get backflow in no time. It demonstrates that it is not possible to make a true check valve without moving parts. A small ball check valve easily handles the job.
@@sircrapalot9954 Application of newer technology is much needed. A train 🚂🚋🚃🚋🚃🚋🚃in a tunnel with walls that reflect the divergent air on to the rear of the train would have twice the efficiency of trains today. Using turbo jets to clear air from the front would prevent wind resistance in the tunnel while additional forward thrust is developed. Directing this displaced jet of air on to a modified Tesla mechanism on the tunnel walls to redirect the air jet on to the rear of the train would again add forward thrust. This is significant since wind resistance at 100 mph is equal to the weight force of the average vehicle. Also, the hyperloop intended to remove air resistance by creating partial vacuum in a tube is more dangerous than the Titanic.
Lastly, Tesla has been successfully tested in jet and rocket propulsion. It's a topic to be studied by all engineers in this field. 🚴三 happy traveling.
Sounds good. Thanks for explaining
I love it! Tesla basically created a Diode which is an electrical component on circuit boards which will only let current flow in one direction - except he created the "Fluid" version of a diode. Which is awesome. I just watched the tesla turbine video and it seems he was doing what we do today just with fluid instead of pure electricity.
Dammit you said it first
Oh that a cool way of thinking about it! It's a water diode, that makes a lot of sense. Great comment.
I enjoy watching this every so often & it always blows me away how Tesla could think. Whudda guy!
Whudda man whudda man whudda man whadda mighty gooood mannn
Seeing the nice graphics 0:27 the working is clear without any explanation.
Not everyone has that intuition bud
r/iamverysmart
Has anyone ever tried to make a firearm silencer in the shape of a tesla valve? I'm interested to know how well it would work at slowing down gasses and whether the moving projectile blocking the primary flow channels would effect it as it travels down the valve. However my instincts are telling me the gasses would just push the projectile downward in the direction of each curve and it would probably just blow up lol.
Yes there are couple patents on it actually.
As I was watching was thinking of asking same question. I think that it would be part of a good design but because gas can be compressed and fluid can't that not all of the same physics applies the same way.
ua-cam.com/video/X2_IOAMlQvE/v-deo.html
This is suppressor CAD design using tesla valve
Superb Animation ! , i am big fan of Nikola Tesla😊🏆🏆🏆🏆🏆🏆🏆🏆🏆
So basically more a resistor than a one-way valve. Still has its uses though.
Edit: More like a zener diode
ua-cam.com/video/mC91vEMwq-E/v-deo.html
Like a zener diode
Pretty much.
No
Yeah, also thought this isn't really a valve but more of a flow regulator.
I never heard of it (Tesla valve). However, I am stunned at the way it works. Thanks for sharing.
What an amazing mind! Still very curious about his Resonance Oscillators and especially since would would think an 'Anti' version could be created...
Yes, I am very awed by the man's genius!
2:25 “you guessed it”
No I really didn’t, I’m not even sure why I’m here
lmao
Yeah, me too. I fell into a wormhole and now I’m in Tesla’s mind 🤪
Hahahah yea2x
Cliche television
Frank Stallone
I have never seen an actual *working* pulsejet engine using the Tesla valve. The reason for this is that the valve is too "soft" and absorbs a lot of gas before it is "full" and the choking effect becomes pronounced enough to cause compression in the combustion chamber. For that reason, any engine built with such a valve would be unlikely to run well -- if at all.
ua-cam.com/video/mC91vEMwq-E/v-deo.html
Completely agree
Do you encounter pulsejet engines often? I know the theory, but I never saw one in person...
@@melonlord1414 I have built a *lot* of pulsejets. I was in an episode of Scrapheap Challenge and also technical advisor to Junkyard Megawars on their pulsjet drag-boat build.
could this be adapted for use in "silencer" tubes used to dampen firearm discharges ?
this is very interesting, also amazing how physics works
love your show & spacex. We traveled to Boca Chica to the the starshing get built. & we got the S dual motor fsd last Christmas 🎄 😎 still have the cybertruck tri motor or 4 motor fsd on order, i got lots of solar & backup battery system to charge them both. love tsla stock
I'm guessing the main reason this type valve hasn't caught on is simply because, as stated, it can not complete block the reverse flow.
For instance water without a lot of pressure behind it (from static height or a pump) will create less vortices and therefor less resistance.
The harder you push the water through (use a big pump), the pressure loss will increase exponentially, and so in relative terms it will be more efficient. It still won't stop flow completely though. It will also mean more damage to the valve due to pit corrosion (the same you get on ships propellers), and that would severely restrict the lifespan.
But it is certainly an ingenious design, no doubt.
That’s not necessarily a bad thing. When you have low flow and low pressure, the moving parts associated with a true one-way valve will be less likely to fail and will have less associated wear.
You can put a mechanical vale at the end which will be suspectible to less wear and tear.
Still useful 5:30
Tesla's "valve" is a piece of junk. its only directional orrifice that restricts one side more than the other.
It has no practical use. If you needed a 1 way orrifice... check valves and a spillback loop would be cheaper than manufacturing this POS
@@zarthemad8386 - What a true simpleton you are. You really tried to speak poorly of Tesla's work? Slap some sense into yourself, boy.
Imagine all the great things we woulda got earlier if it wasn't for the greed of Marconi, Edison and JP Morgan. Tesla was the greatest inventor ever!
Capitalism will always stand in the way of humanity's progress.
Because it was for the people, not for money.
Exactly!
Indeed, the greatest inventor
@@tyriliusmc9798 you mean white people
Tesla might be the most underappreciated engineer of all time. Alan Turing aka "The Father of the Computer" is another, albeit a computer scientist. Any video that celebrates visionaries is a plus in my book. Thanks Sabin!
I'm pretty sure Neumann János is the "Father of the Computer". No, I won't be calling him "John".
And that's two dimensional.
You could alternate units in the third dimension as well, or increase the number and density by adding successive units at small angular changes with many alternating pairs.
Then spiral the design to elongate the valve length.
Makes you wonder if they had Tesla's works in mind when designing tire treads that push rain out from under the contact patch. Cuz I'm looking at the first set uof examples up to the 3 minute mark and can't help but see tire technology as well.
Yes, after 18 times recommended I finally watched it. Great mind of Tesla, ill make one to use on my money flow :o
Every once and a while youtube brings us all to an interesting video like this and we all learn something new
The last diagram looks similar to water drip emitters used in irrigation , the flow is relatively the same under several different pressures . I made the EDM dies for Olsen Irrigations drip emitters which is how I know the internal design .
Tesla was a true genius. His ideas were so simple and beautiful.
👍
Breaking news.. tesla was a ingenious
Personally, I wouldn’t say his ideas were simple as what he provided to the world with Alternating Current is still quite complex to the average individual. When you dive deep into his research and inventions, it’s downright remarkable. For the average individual, it’s just turn a light switch on or turn the tv on and it works.....but in reality with frequencies, potential differences, step up or step down transformers, AC motor and generators and the Battle of Currents, he changed the livelihood of the entire world and died penniless and infamous.
The first sentence of video has to be like,
“The Tesla valve cannot block the flow completely”
@Ronin
yes, there are 100% in the real world with valves, they will stop the flow of water.
@Ronin In real world, your sink never closes? Lmao.
Stella smith almost all valves leak. Bubble tight valves exists but they are $$$$$
@@JSpradley123 I think you underestimate available valves.
We have 100'es of valves at the factory and they all seal fluids 100% at pressures under 5 bar.
(different story for gases or fluids under high pressure)
The only real maintenance is replacing the rubber seals once every couple of years (depending on the usage)
It's not designed to be a constant pressure valve. Under pulsing conditions, and with the right size/length conduits for the density of the fluid and pulse width, it effectively does block flow completely. Think reed valve, not water faucet.
it's not odd that I was awed by Nikola's work and achievements.
Tesla was known to think of physics in terms of waves, and I mean all fields of physics he dabbled in sincerity. It's a neat paradigm of mind, the wave-form. Even in software engineering, with many interacting parts, it can be useful to think of it in terms of waves when you debug and troubleshoot.
interesting, can you give some examples by chance of what you mean by that?
You guys forgot to mention another genius effect of this valve, which is the reason why it isn't near 180° (for example 178°): when the flow of one secondary stream mixes with the main stream, it doesnt just slow the mainstream down, it redirects its forces into the following secondary stream, since the secondary flow comes in at an angle instead of (near-)directly from the opposite side. Thus the force in the following secondary valve is increased, helping it to slow down the main stream even more.
I was waiting the entire video for them to mention that 😁
It would be more accurate to compare this to a pressure-reducing valve, rather than a check-valve / back flow preventer.
Yep.
Was thinking the same.
I would love to see you do it. Just think of what would be accomplished and designed by you.
@@byronndavis1074 I would redirect the fluid all back to the original source mono directionally, this would be equal pressure in opposite direction of original flow, they would cancel each other out
That’s what I was thinking. For a sump pump check valve. Only problem is those are supposed to be vertically integrated. But I would imagine that the sound of it turning off would be drastically reduced if you put a couple 90 degree elbows just above the pump. It would of course need a traditional shut off valve below it though.
I mean even the more expensive “quiet” is by no means quiet. And they break, too.
In essence it is a very simple idea. Break the flow into 2 pipes, one straight, and bend the other one to go into the opposite direction, when reunited. The reverse flow mostly ignores the second pipe because of its perpendicular-opposite direction. I don't think that Teslas design would work as a flood barrier though, with a road put in the middle. It probably works just when the pressure/size is big enough.
wow, you took a simple concept and made it complex
So the answer to can you create a valve without a moving part question is NO.
The Tesla valve increases the pressure drop in one direction so the flow will be reduce drastically but their will be a flow... It allows then a control of the flow rate not a perfect stop of it. You would not be able to use this valve instead of all the valve that you shown at the beginning of the video.
That's what he said at the end of the video, that there will still be flow so technically its not a non-return valve.
But at the start of the video (which is seen by way more people then the end (that is true for ANY video)), he heavily implied at least, that it was possible to make a actual one-way non-moving parts valve on par with the ones he showed with moving parts
it still replaced the former valves in modern jet engines.
@Palo Kan Yes, because in such a place a total valve is not needed a flow decrease is enough. If the answer to the proposed question had actually been "yes" the only places the other valves would have stayed would be if there wouldn't have been enough room for the tesla valve, but as it turns out it only replaced the valves in a few places where a flow decrease is enough, the vast majority of tradition moving parts valves were not replaces because they need to shut the water completely
@@GummieI
I echo what you said, AND:
“Replaced ___ valves in modern jet engines” implies the more traditional valves with moving parts were used in those sections of jet engine first.
Show me. Were they?
I have zero background in jet engine history or design. But I want to say NO, those traditional valves with moving parts were never used successfully in those sections of jet engine. So the “Tesla valve” replaced nothing in modern jet engine.
“Found application in” and “Replaced” are two very different things.
Everytime I think Tesla can't impress me more I see something like this. That man was just incredible.
He was also sexually attracted to pigeons. The more you know. :)
@@Darxide23 Tbh I've seen some pretty hot pigeons myself and I can understand the compulsion.
@@TracyA123 what
@@cellulairerare Yep! I've also seen a few really fine squirrels! They're too fast for me to catch though😞
@@TracyA123 lmao
I was just looking for fishing spots near me on google earth. When I realized the river buy me has a whole bunch of branching nodes like a tesla valve, so I can here for a refresher course. Thanks for the video. I wonder if he got the idea from witnessing this phenomenon in other rivers near him.
I actuly tought of this desine in my head sometimes, but its the first time i see it now
Tesla was probably the greatest mind of the last 200 years
In all mankind
@@Adnan_NIT_H. I think Archimedes has him beat, but Tesla is up there.
Basically, it's a diode. Can't wait to see fluid transistors
Didn’t someone make a liquid calculator? If so it shouldn’t be *that* hard to make one
@@BlueberryCats_ the amount of work to get 4+3is astounding
Its rather a resistor
@@nandechi7563 Transit one way/resist the other, transistor. Resist both ways resistor.
Lero lero lero lero
This reminds me how a torque converter works in vortex vs rotary flow.
Tesla was, astrologically speaking, a water-sign. He was born in the Crab, July 10, 1856.
Not that he believed in astrology or anything. Enjoying these videos!
This is pretty amazing video on Tesla, very innovating, educating and inspiring, young lads should go into more of things to build a greater and invested future for themselves
When bitcoin started it all started like a joke now the worth of it is mind blowing, those who took the wise step then never regretted it
This crypto of a thing I've got interest in investing but afraid of doing it on my own to avoid loss from my own end 😕🥴, and also would love how to trade it too
@@mitchelleprime6490 that's why you need the help of a professional who trade and understand the market more to earn good income.
These professionals understand the markets like it's there own farm and makes maximum profits for investors.
I have been investing and doing it on my own but end up losing all. Just last week i lost $7,450🤨😮
One thing that would be worth mentioning is that Tesla's design relies a lot on Bernoulli's principle. The trade off, in this application, is between pressure and speed. The speed is determined by the Coandă effect. According to the definition, if a fluid meets a curved surface, in our case the added obstructions, it will attempt to follow it. When this happens, the fluid that needs to travel further on the encountered obstruction will speed up (and drop in pressure), resulting in a higher velocity, which will result in the diverging stream clashing with the main stream, obstructing it
Precisely! ....( I had no idea )
true... they use examples to be in line with their theory.. which is incorrect
@@feizal7554 Can you share with us a link to a resource that outlines the correct theory? I'm sure a lot of people will be curious about it
Yes, and the design also has similar affects as Archimedes describes with pulleys. But most importantly it all ties into the theroy of relativity and how we are moving thru spac and time. I think
@@mirceastaicu4131 There is no "correct theory", it is simply a theory, not having all the datum of each subsequent obstruction and / or separation of the fluids. Basics in physic... the more obstructions in the flow path, the lower the ve locity of the flow and the increase in the pressure, if there is a constant force applied to cause the flow i nt the fiorst place
Good explanations with clear graphic
Video is more than wonderful Keep it up I want more innovative hydraulic ideas
I would have loved to see a real demo with a colored liquid.
It doesn't work. Someone already tested it
Stella smith „colored liquids matter“
@@BGraves i think is used on steady flow irrigation system, if you open a dripper with fixed flow rate you see something like this.
@@BGraves who tested it? Tim from Grand Illusions tested it and it worked
@ #CLLM
After seeing this in my recommendations for the 1000th time, the time has come to watch it.
Lol same
i was a plumber for years. this valve is a joke. it cannot do what's advertised.
want proof? go ahead and try to find a video of this valve in operation.
the water shoots out either side just as fast as you pump it in the opposite.
@@__shifty You know when this valve could work? Lets say you have a junction with one side a normal pipe, and the other with this valve, the water will obviously choose the way with the less resistance. If you somehow had a pipe blockage or an overflow in the other pipe, the water will then be forced to move into the valve. This is a scenario i think it would do a good job at. It is not a valve that can stop water when you force into it. It can only be a resistive valve.
You acted like the Tesla valve, much resistance but in the end you've watched it.
😂😂😂
Interesting design, considering when it was made. I'm definitely awed.
Out of all the subjects in school physics is the only one that makes complete sense to me
4:17
Water : "Man! Life in here is so difficult!"
Tesla valve : "Heh heh I know, right?"
The DeltaP seems depending on the flow rate. This will work great for mixing applications not sure about replacing check valve applications.
Great mind.! Great animation. Thanks.
With the toy version, the harder you blow, the more resistance you get, but it never is completely blocked, and maybe low airflow lets through more than higher airflow... Very little resistance until you get to a certain airflow anyways...
I don’t know why this was on my recommendations but here I am watching the full length of the video
ما اجمل علم الفيزياء بكل ما فيه من نظريات و قوانين الطفو و الانغمار و التدفق و الطرد و الشفط و غيرها التى بنى على اساسها مخترعات عالميه عظيمه كثيره و مفيدة للبشر
That’s more like a pressure regulator than a stop valve. Still very cleaver though! 💡🤓
That is EXACTLY what I came away with. It would slow the water by a great deal..but it couldn't stop it. Not without a shutoff VALVE to do so.
I guess I am to stupid to understand what they mean by the word..VALVE. 😂😂😂😂✌️
Some folk need to look in a dictionary
@@garyheaton4791 *too. *too stupid. LOL!🤪
@@garyheaton4791 hello binary friend, put the unit at an angle n u can stop the drip. Stop acting so linear .
No, not a pressure regulator but a flow regulator. Like in drip irrigation. I do wonder how the flow reacts to an increase in a higher or lower pressure.
Just when you think you know about all of Tesla's amazing accomplishments, you learn about another one.
Gee, do you call "amazing accomplishment" something that was never used in practical applications because it is not even effective?
@@igoranisimov6549 wdym "never used"? at 5:43 he says "model valveless pulse jet engines use the tesla valve to replace the reed valve in conventional pulse jet engines"
@@roshasensi2220 or really? Do you mind telling which company makes them?
@@igoranisimov6549 oh shut up Igor
@@igoranisimov6549 bruh he says model valveless pulse jet engines USE the TESLA VALVE to REPLACE conventional pulse jet engines
that means they replace the reed valve for the tesla valve.
In airflow through a duct in HVAC applications, turbulence causes restriction to flow. Turning vanes and proper transition design is vastly important, especially when the pressure available to move the air is so small. A small restriction doesn't cause a small difference in air distribution to an outlet, a small restriction means almost all the air goes to the least restrictive path. Poor duct design or installation can make air balancing almost impossible.
Very beautiful, you are just great and thank you for the beautiful videos!!! Samchenko Gennadii !
Each of the little "islands" looks just like the cross-section of an airplane wing.
Interesting observation
You're on to something, I can tell...
billucf96 the Bernoulli principle at work
Interesting
yes, bernoulli's principle
I don't think it's possible to understand how Tesla's mind actually worked.
He fell in love with a pigeon, so there were a few nooks and crannies in there.
@@JensHove tf
Push the water back with water? Its really simple if you think about it
He is said to have been a schizophrenic
@@JensHove yeah, but you should've seen that pigeon!
Thanks for all the info about Tesla
What happens if you apply this to electrons? Using a mass to change the flow.
One additional perspective: Tesla thought in oscillations and capacity - As demonstrated in his work on alternating current. While this valve works for steady-stream applications (like constant pressure water flow), it is intended for oscillating flow (like in the pulsejet engine).
what i am doing here 2am reading comments, guess anything from NTesla is interesting :)
Aye, constant flow isn't impeded by the valve nearly as well as pulses.
It's very clear this was made to catch bursts of pressure 👌🏻
@@wastedwizard5112
I don't think so.
Tesla was intrigued by the idea that vibrations, so basically sound, had the capacity to mimic other chemical and physical reactions. Modern science now calls this study phonons. Later, he would update his ideas to include sonic resonances from many different phenomenon. This obviously influenced his work on radio and alternating current. And directed his ideas later in life about wireless electricity, through microwave transmission. He probably didn't have an understanding of microwaves yet, but that is what he was thinking about.
I’m sure had Tesla directed more time and contemplation towards this valve , he would have incorporated a full stop application. But to serve as an indication of the type of mind Tesla possessed, he was at least as brilliant as Edison, if not more, and fit to sit at the table with Einstein
The brilliance of simplicity!
Since you did this video on fluid dynamics, how about a video on how a sound suppressor works?
Would this valve be a great suppressor for rifles and handguns?
Whilst being up...Googling.."Do penguins have knees.." I ended up here by a mistake (knocking my forehead into the keyboard I guess...Falling asleep!), hence being unable to answer that question, I'm totally unable to google it again... BUT, I now know how Tesla used pressure to kill pressure...Thanks!!
lmao
Not a bad place to end up!
You're the cool version of insane.
@Ramzan good, now I don't have search that myself
My buddy showed me a pdf of Teslas patent for this a few years ago. We were both in fluid power at the time.
Then I randomly get suggested this video years later lol
I actually figured that once water had filled the side pockets, they wouldn't empty out back into the main stream but just stay filled due to the main stream being higher pressure, then the water has a slightly bumpier ride but is all in all mostly uninterupted