Found this “Gear position switch bolt 6.5 0.65 4.7” I would just go with hand tight enough to mount down if leaking my guess would be bad o ring. In my case I have erratic indicating in 123. Ordered replacement sensor and o ring
Great video, but I had a couple questions about this..I just changed my gear sensor by watching your video. But when I started my bike and put it in 1st,it didn't say 1st. Also my clutch leaver is way off after taking off my clutch cylinder.. could you give me any advice plz..
Had a question for you about a steering stabilizer damper assembly if you could help me ! I had a small front end collision and in the process of replacing plastics I broke the connector on the sensor. If I’m to swap that out should I replace with an oem one or switch it with an after market, also how can I get the SD light off ?
Honestly dude, if I was in your position I would just buy a used OEM one on Ebay, cost around $50-$100. You don't need to "reset" the SD light, it will auto-reset once you plug the new one in, I just tested it on my bike for you. But, be warned, if you want to go aftermarket they are VERY expensive, $300-$600 depending on brand. Also, most aftermarkets are purely mechanical not electronic, and they come with a bypass plug to turn off the SD light. Hope that helps!
You are the GOAT lonely rider ! Forever grateful for you being so responsive ! I have never had education come so easy when involving a motorcycle !! Did exactly what you recommend and bam! No lights on the dash and it runs amazing!!
If you know could you tell me what all year gps can I use? I have this problem.
Do you have the same bike as me? 07-08 GSXR1000?
What are the torque specks for the gear position sensor I got a new one ring on mine and it still has a small leak
Found this
“Gear position switch bolt 6.5 0.65 4.7”
I would just go with hand tight enough to mount down if leaking my guess would be bad o ring.
In my case I have erratic indicating in 123. Ordered replacement sensor and o ring
Should be around 3 ft-lbs, but I just hand tighten mine.
Great video, but I had a couple questions about this..I just changed my gear sensor by watching your video. But when I started my bike and put it in 1st,it didn't say 1st. Also my clutch leaver is way off after taking off my clutch cylinder.. could you give me any advice plz..
Had a question for you about a steering stabilizer damper assembly if you could help me !
I had a small front end collision and in the process of replacing plastics I broke the connector on the sensor. If I’m to swap that out should I replace with an oem one or switch it with an after market, also how can I get the SD light off ?
Honestly dude, if I was in your position I would just buy a used OEM one on Ebay, cost around $50-$100. You don't need to "reset" the SD light, it will auto-reset once you plug the new one in, I just tested it on my bike for you. But, be warned, if you want to go aftermarket they are VERY expensive, $300-$600 depending on brand. Also, most aftermarkets are purely mechanical not electronic, and they come with a bypass plug to turn off the SD light. Hope that helps!
You are the GOAT lonely rider !
Forever grateful for you being so responsive !
I have never had education come so easy when involving a motorcycle !!
Did exactly what you recommend and bam! No lights on the dash and it runs amazing!!
Glad it worked out for you bud!
GSX-S1000 is supposed to have the same engine. THis helps, thanks.
@@bribbripnairbnab7301 yes, it’s all the K5 motor!
Thanks 😸👍🏾
thx bro