Nice vid man!!! SUBBED! - Try a flatter wing and droop screws in the front end...get the front as low as you can bro and a good set of foams. You'll be right on the money guaranteed, 👍
aside from keeping a straight line at speed (vertical fins) i'm kinda lost as to why people put downforce wings on "speed run" cars. take a look at bonneville records and the cars that ran them. you will not see many downforce wings.
@ZHaunDK mine looks goofy without a wing but also I route my rx antenna through the wing mount and have my GPS strapped onto the mount also. It offers protection for both. I've trimmed the wing down a bit to help with drag.
Lower it as far as you can in the front and lowing the back so it’s slightly higher than the front. Then tighten the shocks. Your swing arms should be straight out. There is a place to thread in a screw to achieve this. You won’t flip anymore.
I just bought one and I am having trouble getting it to track straight. In reverse it speed wobbles and forward it doesn't want to go straight, even with a gyro. I put a dumbo radio in it and a better servo. I cranked down the a arms so they are flat and adjusted toe in and camber. I am thinking with all the linkages it has too much play, any advice would be appreciated.
I have this model and I want to go faster than 2s stock without pinion only batery 3s but it hasn’t space for,I think you use a zee but it enters well?
Great upgrade! You car was flying!
Thank you !! maybe it will fly !!! 😂😂
Nice vid man!!! SUBBED! - Try a flatter wing and droop screws in the front end...get the front as low as you can bro and a good set of foams. You'll be right on the money guaranteed, 👍
thanks for watching man !!!!
Very nice bro. Try foam tires 👍🏼
I like the rustler 4×4 wing on the 144001. Lower profile and works gteat for high speed runs.
aside from keeping a straight line at speed (vertical fins) i'm kinda lost as to why people put downforce wings on "speed run" cars. take a look at bonneville records and the cars that ran them. you will not see many downforce wings.
@ZHaunDK mine looks goofy without a wing but also I route my rx antenna through the wing mount and have my GPS strapped onto the mount also. It offers protection for both. I've trimmed the wing down a bit to help with drag.
Bonne journée frèro ✌🏽 👊🏽
Thanks Bro 👊🏽
Awesome!!!!! Can I do the same with the 124017???
Yes indeed...See my comment above. 👍
Yes you can !!
Sweet! 👍🏻
Lower it as far as you can in the front and lowing the back so it’s slightly higher than the front. Then tighten the shocks. Your swing arms should be straight out. There is a place to thread in a screw to achieve this. You won’t flip anymore.
Thanks !!!
How do you make the RC wl 144010 fast?
Watch the video and it shows you .
Nice bro / Subscribed 👍🏻
Thanks for your support !! 🔥
I just bought one and I am having trouble getting it to track straight. In reverse it speed wobbles and forward it doesn't want to go straight, even with a gyro. I put a dumbo radio in it and a better servo. I cranked down the a arms so they are flat and adjusted toe in and camber. I am thinking with all the linkages it has too much play, any advice would be appreciated.
I'm sorry for you ,😣 I already had this problem with the 144001 model and I still haven't found a solution !! 😅😅
@@toyzndahood I will work on it and let you know what I come up with.
I still fight this issue on all of my 1440xx's. I don't have the wobble in reverse though.
Nice 👍🏾
Thanks man !! 👍🏽
Links for 26t not working Big Dog. Not for outsider.
I have this model and I want to go faster than 2s stock without pinion only batery 3s but it hasn’t space for,I think you use a zee but it enters well?
And I will but something of weight in the front.
Yes it's a ZEEE 2200mAh, and it enters but well with some difficulty 😣😣 ...
@@dariogonzalezpalacios2676 I'll think about that, thanks for the idea 😉😉!
Raise the rear end and lower front end, this should give it more downforce
Thanks man !! i will try... 👍🏽
Do you use gyro
No gyro !! 😀
Cool il tire bien en 3 s
Merci !! manque d'équilibre lol !!! ça viendra 👍🏽
@@toyzndahood yes lol mais ça tire très bien cool
With a big pinion yes. Then turn down the peak throttle if need be. I don't fuck with 2 s. I even have room for 4s
Non mettete motori brushless,la.macchina é troppo piccola,finirá per rompere i componenti e slargare gli assetti
Those diffs are completely dry
He put grease in them
Joskus nuo kardaanin ruuvit on niin lujassa ettei niitä saa irti ilman että ruuvin kanta hajoaa.
😂
😂