your triple clamps arent aligned thats the issue with the front fender not aligning with the wheel it your turn your bars hard they might move but if they dont loosen the bolts on the top triple clamp so you can line it up and tighten it again
Was thinking about a restyle kit. Man it looks like junk brackets. I didn't realize all that bracket fubar went into it. I wont be doing it now. Thanks for sharing
It’s nice to see this video after I just did my kx 125 but, instead, I replaced my with the same type of plastics but in black and came out looking like new, and the graphics I ordered with KALAIR GFX
It came with graphics but I never put them on, I was really disappointed with the restyle kit and after the first ride the motor blew up and I sold it.
It’s cool and all but mine did not fit well and if I crash once this kit probably won’t work www.txrace.com/shop/tx-race-restyle-kit-for-kawasaki-kx125-250-1999-2002/
Yea so your water pump is connected to the cooling hose on the front right of the motor, I would order a whole kit and re do it all. Anything with the pump is usually pretty easy. There should be a seal right behind the impeller.
@@FullThrottleEdits found out it’s the crank man dude told me it was a water pump I got it to start knocks insane can’t find a crank anywhere for a 2001 🥹
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
your triple clamps arent aligned thats the issue with the front fender not aligning with the wheel it your turn your bars hard they might move but if they dont loosen the bolts on the top triple clamp so you can line it up and tighten it again
Nice vid! My kx100 had the same bolt Situation with the tank. That helps me a lot.
Do they make them restyle kit for a 2002 kx85???
2020 kx 450 graphics will fit it.
it's very good 💯
where did you buy the fixing pastes to be able to adapt
My 2001 kx 250 has the same gas tank issue, a solution that I found is to put some Jb weld in the tank and then put the brass fitting back in
Was thinking about a restyle kit. Man it looks like junk brackets. I didn't realize all that bracket fubar went into it. I wont be doing it now. Thanks for sharing
Yea it’s a cool idea but, like I said In the video after one crash it’s gonna look even worse. I ended up selling the thing
@@FullThrottleEdits you got rid of the bike. Its a badass 4 stroke killer
I blew up the bottom end on the 2nd ride so I got rid of it
Well damn id of bought it from you. I need a green 125 project bike.
It’s still somewhere around council bluffs area in pieces, I don’t think it ever got rebuilt, I might know who has it
It’s nice to see this video after I just did my kx 125 but, instead, I replaced my with the same type of plastics but in black and came out looking like new, and the graphics I ordered with KALAIR GFX
Good vid dude! Ya sound like joe dirt 🤣🤘🏼
Ta for video. Been thinking about getting the same. What graphics did you get? if don't mind me asking.
It came with graphics but I never put them on, I was really disappointed with the restyle kit and after the first ride the motor blew up and I sold it.
I have the same bike can’t find these plastics
It’s cool and all but mine did not fit well and if I crash once this kit probably won’t work www.txrace.com/shop/tx-race-restyle-kit-for-kawasaki-kx125-250-1999-2002/
@@FullThrottleEdits your the man by chance you have any pointers on doing a water pump seal ? My oil and coolant are mixing
Yea so your water pump is connected to the cooling hose on the front right of the motor, I would order a whole kit and re do it all. Anything with the pump is usually pretty easy. There should be a seal right behind the impeller.
@@FullThrottleEdits found out it’s the crank man dude told me it was a water pump I got it to start knocks insane can’t find a crank anywhere for a 2001 🥹
@ROADJOKERS you can buy a rod and rod bearing kit and send your crank to a mx shop for them to rebuild it
A roupa da 2021 da na 2001 125
Mano deixa te perguntar a roupa da 2021/22 cabe na kx 2014?
❤