I am looking for a more stable connection to my Pixellot camera for recording/streaming hockey games (Ice rinks suck for mobile wifi being concrete buildings). This is a very well-done video, and I appreciate the content. I currently use a Nighthawk M6 via ethernet but lose many streams due to inconsistent signal. It has been a year or so since you did this. Is there anything you would update?
Hi, everything works fine but I can't get the router to send the bonded network as the Wi-Fi. Any solutions?? I connected the router through the ethernet cable and set it up as eth0 to emmit signal. Is that right??
Raspberry Pi 4 . In our testing we continuously run uploading to UA-cam at 6Mbps for 2 hours without any issues. Used 2 network dongles. Speed test gives 25+ Mbps upload and 50+Mbps download.
Thanks for your encouragement. Sadly we don’t have starlink access at my country location. But surely it will work. I know a few people who tried and successfully done it.
hello i purchased 2 4g lte dongle and it connected to the internet but it does not support to use internet. i could not to setup this unit yet. please explain about sim card which type sim should we buy.? i am living in japan so i using AU sim and Docomo Sim card. i tried to use this dongle separately before make this unit. but i could not go to internet using my sim card. please explain about sim card
Insteading of sharing ETH0. Is it possible to share the bonding with wifi instead? If so, how can I do that? Like sharing the bonded dongles with wlan0
Yes, but this video is not about the actual bonding of interfaces, it's about pushing certain Raspberry Pi software - "speedify" - that software is NOT required for port bonding, just For The Record, most of this video is non sequiter to the title. I'm pretty sure it's an AI Generated script on the topic given in the headline. Note there are a number of anomalies in the video imagery, too, that show this not about actual use cases, but is a proof of concept for the software, only.
@@sumkitteh Actually we use this for bonding multiple networks for our outdoor live events. It’s been a year we are using this for our clients live events at different locations. Sorry to hear that you didn’t like certain parts of this video. My bad, may be I need to work more on it. Our aim is to share what’s works for us and may help someone else looking for similar solutions. We also use this for our events where we get live feed from outdoor locations to our studio for live graphics overlays and titling etc.
Hi, great video! We are streaming live youth soccer using an AI camera (Veo camera 2). This camera has two options. Use a 4g LTE sim card or connect to a wi-fi. But we would like a more stable stream using bonding. But as we are filming/streaming on-site with no access to a power source. We would need to run the raspberry pi as in this video but using a powebank. Would that work or will the raspberry consume to much power for this to work? Will a powerbank give enough power for it to boot and run without issue until the battery is drained.
Unfortunately, the internet will be as good as the speedify server capacity. If the capacity is full, then you will experience far less speed bonded connection compared to single WAN connection.
This is such a goofy complaint by ccmk. Literally any server of any type will be limited by that server's connection. This is not a complaint that is unique to speedify, or bonding.@@papecoly2632
Absolutely! Speedify runs on the Raspberry Pi and several other, similar devices. Raspberry Pi (and Raspberry Pi-like) devices and operating systems we've tested with: Raspberry Pi 4 B with Raspberry Pi OS(32 bit) Raspberry Pi 3B+ with Raspberry Pi OS (32 bit) Raspberry Pi 3B+ with Ubuntu Mate (64 bit) ODroid N2 with Ubuntu 18.04 (64 bit)
The wireless keyboard shown does not require a mouse - wtf yalll is this some kind of AI generated script? Get to the good stuff, quit trying to "sell" me by hijacking buzwords....
I am looking for a more stable connection to my Pixellot camera for recording/streaming hockey games (Ice rinks suck for mobile wifi being concrete buildings). This is a very well-done video, and I appreciate the content. I currently use a Nighthawk M6 via ethernet but lose many streams due to inconsistent signal. It has been a year or so since you did this. Is there anything you would update?
That’s for your kind words. You can try this. Just run following commands to update you Pi.
sudo apt update
sudo apt full-upgrade
This looks very helpful. I'm going to try it out tomorrow.
Let me know how it goes.
Hi, everything works fine but I can't get the router to send the bonded network as the Wi-Fi. Any solutions?? I connected the router through the ethernet cable and set it up as eth0 to emmit signal. Is that right??
Glad that we able to assist and solved your issue .
Amazing Thank you. Does this work on 3B or just 4? Also, what kind of speeds are you getting thru the Speedify VPN?
Raspberry Pi 4 . In our testing we continuously run uploading to UA-cam at 6Mbps for 2 hours without any issues. Used 2 network dongles. Speed test gives 25+ Mbps upload and 50+Mbps download.
Good catch - that's one of the tells - this video is NOT about what's in the headline -
Is this an on-premise solution? is the bonding happening on the raspberry pi itself? or still being sent to Speedify servers?
This is a hybrid solution where the bonding happens at Speedify servers via Speedify installed on raspberrypi.
I hope you make more videos about speedify, and try to bond two starlink with it. it be nice :) anyways this is a great video. Thank you!
Thanks for your encouragement. Sadly we don’t have starlink access at my country location. But surely it will work. I know a few people who tried and successfully done it.
hello i purchased 2 4g lte dongle and it connected to the internet but it does not support to use internet. i could not to setup this unit yet. please explain about sim card which type sim should we buy.? i am living in japan so i using AU sim and Docomo Sim card. i tried to use this dongle separately before make this unit. but i could not go to internet using my sim card. please explain about sim card
Did you able to connect to Internet via these dongles on your laptop?
Insteading of sharing ETH0. Is it possible to share the bonding with wifi instead? If so, how can I do that? Like sharing the bonded dongles with wlan0
Yes it is possible. You can share bonded network with WiFi instead of lan.
Yes, but this video is not about the actual bonding of interfaces, it's about pushing certain Raspberry Pi software - "speedify" - that software is NOT required for port bonding, just For The Record, most of this video is non sequiter to the title. I'm pretty sure it's an AI Generated script on the topic given in the headline. Note there are a number of anomalies in the video imagery, too, that show this not about actual use cases, but is a proof of concept for the software, only.
@@sumkitteh Actually we use this for bonding multiple networks for our outdoor live events. It’s been a year we are using this for our clients live events at different locations. Sorry to hear that you didn’t like certain parts of this video. My bad, may be I need to work more on it. Our aim is to share what’s works for us and may help someone else looking for similar solutions.
We also use this for our events where we get live feed from outdoor locations to our studio for live graphics overlays and titling etc.
Can you please share how? I am trying to do that.@@gadgetspod
@@gadgetspod when I change sharing to wlan0 it does not share to wifi. how can I do this?
Really nice guide
Thanks. Glad this helps you.
Hi, great video! We are streaming live youth soccer using an AI camera (Veo camera 2). This camera has two options. Use a 4g LTE sim card or connect to a wi-fi. But we would like a more stable stream using bonding. But as we are filming/streaming on-site with no access to a power source. We would need to run the raspberry pi as in this video but using a powebank. Would that work or will the raspberry consume to much power for this to work? Will a powerbank give enough power for it to boot and run without issue until the battery is drained.
Yes it should work fine with a good powerbank with 5.1 V 3 amps output. Try Anker power bank.
excellent ! thanks.
Glad you liked it.
What 4g usb sticks are you using? I can see they are Huawei but I can't see the model
Huawei E8372 USB 4G Dongles
What are the white dongles on the pi?
These are Huawei e8372 4g network dongles.
Unfortunately, the internet will be as good as the speedify server capacity. If the capacity is full, then you will experience far less speed bonded connection compared to single WAN connection.
Can you elaborate please? what can limit speedify servers capacity? Is there any solution to failover on just one connexion if we meet that sceanario?
This is such a goofy complaint by ccmk. Literally any server of any type will be limited by that server's connection. This is not a complaint that is unique to speedify, or bonding.@@papecoly2632
We need to buy one made to order. Is it possible?
Yes. Contact via what’s app link in description.
Is it work in pi5?
Yes.
Can I use other versions like pi 3?
Absolutely! Speedify runs on the Raspberry Pi and several other, similar devices.
Raspberry Pi (and Raspberry Pi-like) devices and operating systems we've tested with:
Raspberry Pi 4 B with Raspberry Pi OS(32 bit)
Raspberry Pi 3B+ with Raspberry Pi OS (32 bit)
Raspberry Pi 3B+ with Ubuntu Mate (64 bit)
ODroid N2 with Ubuntu 18.04 (64 bit)
Nice. What’s the price if we want one made?
Message on Whats app link in the video description.
Raspberry lan to lap's lan port ?
Yes it’s setup that way for convenience.
The wireless keyboard shown does not require a mouse - wtf yalll is this some kind of AI generated script? Get to the good stuff, quit trying to "sell" me by hijacking buzwords....
We want one made as well. Will contact.
Yes find what’s app link in video description.
This is something new @speedify
Glad you like it.
Nice #networkbonding router with @speedify and @raspberrypi
Thanks you.