Buffeting sorted with pyramid fork cover and a little puig deflector shield. The hand controls on left were driving me nuts - especially with winter gloves on. I changed angle of instrument button cluster I changed Angle tipped it up. With a lot of adjustment I have it perfect now.
I have optimate lithium charger! The optimate 3 isn't for long term charging on a lithium battery! My mechanic hooked it to the starter motor! Connecting port is under the seat!
I put on a hex easy can for led denali lights cam corder horn etc. Mine has a tracker and alarm so I bought a charger. I found it would not always work ( showing battery bad and needs changing) I bought another charger ( different make) now no issues.
Just wondering if fed the connections in from the top of the battery as I did, if so it seems very tight fit to replace side cover to the point it keeps jumping off the locating lugs on the bottom, looks like the red cover on the positive side of the battery is stopping it.
Picking up my tricolor 2022 AT AS-ES in a few days. Not many ATs in the US market. Can't wait.
Congratulations😀
Buffeting sorted with pyramid fork cover and a little puig deflector shield. The hand controls on left were driving me nuts - especially with winter gloves on. I changed angle of instrument button cluster I changed Angle tipped it up. With a lot of adjustment I have it perfect now.
I have optimate lithium charger! The optimate 3 isn't for long term charging on a lithium battery! My mechanic hooked it to the starter motor! Connecting port is under the seat!
The new wife😅🙌🏻
That’s my lover😂
I put on a hex easy can for led denali lights cam corder horn etc. Mine has a tracker and alarm so I bought a charger. I found it would not always work ( showing battery bad and needs changing) I bought another charger ( different make) now no issues.
Thanks for the video. Did you loose the bike set up? Like devices connected or other set ups?
Thanks for watching my video.
No, I didn’t lose anything. Everything was working perfectly after.
@@falcuspluscamera thanks. I am planning to do the same. Regards
Just wondering if fed the connections in from the top of the battery as I did, if so it seems very tight fit to replace side cover to the point it keeps jumping off the locating lugs on the bottom, looks like the red cover on the positive side of the battery is stopping it.
It was very tight, but my side cover fit perfectly. And the red cover on the battery positive site I needed to push and I just little bit better.
Nejdříve se odpojuje plus + pól 😉 aby nedošlo k zbytečnému jiskření nebo k poruše elektroniky.
I guess I did it the other way. 😂