As a business I sticker my brand over Raincovo Clear Wide Mouth Top & Bottom Foam Cannon with SS Gravity Ball for $19. Take upper apart to insert the included 1.1 orifice and add an compressed foam maker filter insert in the tip for a total of two back to back like MJJC's model. Just clean it out occasionally or replace the $1 filters. $20 total investment per cannon. Shaving cream foam results and it doesnt matter if employee breaks one or accidentally leaves it behind on a job. Keep 2 per mobile unit. Winning!
Smart move showing it actually gets Pearl to foam. That’s a mini miracle in itself. I’m with you on the red n black. I’m sure the pro version of this will be r&b. Nice vid!
Great video my brother! That foam was insane. What would you do since it’s not practically made for cleaning use on soap rinse off then use the MJJC after the first initial foam and rinse and do the contact Wash?
@@StaySlick copy. I apologize I may have worded it wrong. Say per say on a dirty vehicle. Would you use say a higher alkaline soap or higher ph to bring down the dirt grime off the panel for a better cleaning pre foam. Then use the MJJC snow foam for the contact Wash?
@@DetailingMadeSimple In one of his video's he used APC SC with Canon to pre wash an extra dirty vehicle, and wash off fairly fast , and then foam soap canon the vehicle, and contact wash using the soap that he applied with the canon. Then rinse and follow up while drying using anyone of theses three Bead Maker, Xtreme solution, or Technicians Choice
Hey mate, random question for you! I've used meguires detailer apc 10:1 on interior with a steam cleaner for my door panel and on one panel of my black trim has completely faded white. Any ideas? Cheers, from Australia!
@@StaySlick you think its a possibility? Its from the exact spot, I have mine set up in a similar fashion just with a manual reel but just wondering if the bend and constant pressure flowing through weakens it since it’s consistent in the same area
I Just bought the 2.0 cause i don't like the transparent bottle 🙈 and the basic foam gun in the AVA pressure washer Is a shit! Anyway..your videos are really good and very well done. You should have many more followers and likes for their qualities 🤷👌👍
Same foam quality than the previous version, there is no way in the world to make more foam than this, this unit doesn’t produce more foam than the previous one! I tested already is more well constructed thats all
@@StaySlick im sure we will, I did the test with the previous mjjc pro version 2 and this one! Same beautiful shaving thick foam, if there’s any other way, you can get much more thicker than this let me know , it needs to be dry foam in order to layer up and create a thicker layer, but it doesn’t make a difference on cleaning abilities, I just do it for fun , the foam sometimes is still on my driveway after several hours
As a business I sticker my brand over Raincovo Clear Wide Mouth Top & Bottom Foam Cannon with SS Gravity Ball for $19. Take upper apart to insert the included 1.1 orifice and add an compressed foam maker filter insert in the tip for a total of two back to back like MJJC's model. Just clean it out occasionally or replace the $1 filters. $20 total investment per cannon. Shaving cream foam results and it doesnt matter if employee breaks one or accidentally leaves it behind on a job. Keep 2 per mobile unit. Winning!
Great idea I actually did that same thing to an Amazon one I had and it worked great.
where can i buy the compressed foam maker filter? thanks
The what?
Smart move showing it actually gets Pearl to foam. That’s a mini miracle in itself. I’m with you on the red n black. I’m sure the pro version of this will be r&b. Nice vid!
Thank you Anna
Wow. Excellent foam. Great video too.
Thank you bro
I love my V3, it’s awesome
Just found your channel and subscribed. Great videos. Thank you 👍
Thank you brother and welcome.
Great video, Gary. 👍🏻🇺🇸🇺🇸🇺🇸
Thank you bro
Great video my brother! That foam was insane. What would you do since it’s not practically made for cleaning use on soap rinse off then use the MJJC after the first initial foam and rinse and do the contact Wash?
Thank you bro I’m not sure I understand the question but I just use the mjjc for all foaming needs.
@@StaySlick copy. I apologize I may have worded it wrong. Say per say on a dirty vehicle. Would you use say a higher alkaline soap or higher ph to bring down the dirt grime off the panel for a better cleaning pre foam. Then use the MJJC snow foam for the contact Wash?
@@DetailingMadeSimple In one of his video's he used APC SC with Canon to pre wash an extra dirty vehicle, and wash off fairly fast , and then foam soap canon the vehicle, and contact wash using the soap that he applied with the canon. Then rinse and follow up while drying using anyone of theses three Bead Maker, Xtreme solution, or Technicians Choice
Hey mate, random question for you! I've used meguires detailer apc 10:1 on interior with a steam cleaner for my door panel and on one panel of my black trim has completely faded white. Any ideas? Cheers, from Australia!
It’s possible to turn plastics white with steam if it gets too hot.
@@StaySlick A trim restorer should bring it back up to speed I assume? Thanks for the reply
I got one. For some reason my MJJC V3 seems to requiere been maintained more frequently than other cannons I own.
I can’t figure out why.
Hmmm interesting. I’ll keep an eye out.
Flexzilla giving out because of the bend going to the reel from the pressure washer?
No it’s not attached. I’m only using the reel for the retractable function.
@@StaySlick you think its a possibility? Its from the exact spot, I have mine set up in a similar fashion just with a manual reel but just wondering if the bend and constant pressure flowing through weakens it since it’s consistent in the same area
I Just bought the 2.0 cause i don't like the transparent bottle 🙈 and the basic foam gun in the AVA pressure washer Is a shit! Anyway..your videos are really good and very well done. You should have many more followers and likes for their qualities 🤷👌👍
Hey thank you I really appreciate that.
Same foam quality than the previous version, there is no way in the world to make more foam than this, this unit doesn’t produce more foam than the previous one! I tested already is more well constructed thats all
Unfortunately that’s false. Foam thickness and the amount thereof is subjective. Not everyone perceives foam output as the Same.
@@StaySlick very simple, make a video using the new and the previous one same soaps same amounts, this foam is thick, there is no way to get more
And you think you’ll be able to tell the difference on a UA-cam video?
@@StaySlick im sure we will, I did the test with the previous mjjc pro version 2 and this one! Same beautiful shaving thick foam, if there’s any other way, you can get much more thicker than this let me know , it needs to be dry foam in order to layer up and create a thicker layer, but it doesn’t make a difference on cleaning abilities, I just do it for fun , the foam sometimes is still on my driveway after several hours