EASY WAY - How to change your radiator Audi A6 C6
Вставка
- Опубліковано 17 тра 2021
- Today, i am showing you how to change your Audi A6 C6 radiator. This DIY does not include coolant bleeding and refilling. Make sure you use Volkswagen / Audi / Porsche approved coolant fluid, it is usually pink coloured. I apologize for some dark area places. Enjoy ! Any questions, feel free to ask down below. I
FOLLOW ME ON MY MECHANIC JOURNEY!
Facebook - / mtljack
Instagram - / mtljack
►Video recorder : Sony X3000 4k Action Cam
►Subscribe !!! Check out my other DIY's & Car's Reviews videos! I am Canadian from Montreal! :)
►MONTREALERS, don't hesitate to contact me for a car review :)
►Music by NoCopyrightSounds : • Kisma - Fly Again | Dn... - Наука та технологія
Very informative. THANKS!!! I subscribed 😊
Thx mate! 💪👍
This is a great video.
Ask a question.
You removed the transmission cooler line on the passenger side and a little oil fell out. Is it transmission oil? Or is it engine oil?
Does the O-ring need to be replaced?
Also, when injecting coolant, how did you bleed the air without using a vacuum?
I do not live in an English-speaking country.
Thank you.
I think it was transmission oil that came out from the lines. I strongly suggest to replace the O-rings. All i did was, i left the coolant bottle cover opened, left the car idle & rev a bit, the coolant will slowly go down. Then keep refilling till the MAX line.
thank you
What is the name of the part that looks like a radiator that you didn’t disconnect from the hoses? 12:02 I know that grammar was terrible. But it’s the best I got. (Pls help)
How many hours did this take you? Thanks
You drain the transmission fluid?
Bro how long did it take you? I need to change mines and are there radiator lines near the bumper? Because I have a small leak close to my fog lights on the driver side
3-4 hours i think, no lines near the bumper.
hello i have a question would you like to help?
I'm surprised. Because the german model looks different and there you can bring it to service position. On german model you don't need to remove the cooler and so on. But good to know.
2009 C6. Everything was the same...up until I have to pull out the radiator. Not the same. This is the 3.0T, so, the radiator is mounted differently. Have you replaced a radiator on a 3.0T?
Hello, sorry, i never had a chance to work on the 3.0 supercharged unfortunately.
I need to change the radiator on my 3.0 did did you end up finding a video about it I’m not having any luck only for the v8 and the 3.2
How different is it to do this on a 2012 Audi a6?
probably the positions of the screws are all different. Different screw or bolt sizes but in general, shoulnt be too far off.
You ever figure it out bro??
I broke my radiator air duct from upper side its full of rust even cant remove the lower pipe as I have 2.0t
2.0T are much easier to work on
Where you located?
Montreal
@@MTLJack if you have questions also you can message me i have a 2007 audi a6 3.2 quattro i did all the work myself so i know alot
@@rival3825 @MTLJack by any chance do any of you gentlemen know if i have to drain the transmission fluid for this? had a fender bender so replacing the radiator and ac condenser, appreciate the speedy fed back trying to get back on the road, also if i need to support the engine since the front of the engine is sits on the radiator.
@@MTLJack by any chance do any of you gentlemen know if i have to drain the transmission fluid for this? had a fender bender so replacing the radiator and ac condenser, appreciate the speedy fed back trying to get back on the road, also if i need to support the engine since the front of the engine sits on the radiator.
@@rival3825 I want to do mines but not sure how long it will take
This can be an all day job at home. Unless you are very fast and skilled. Im doing this right now and it is time consuming alot of bolts and parts have to come out. Prolly 4 or 5hrs. I charged 8hrs of labor.
I did it in 3 hr
So in other words, you're ripping someone off.
You drain the transmission fluid ?