please send a screen shot to my linkedin or to techedkirsch at gmail dot com, and i'll take a look. you likely have a wire not fully connecting to a symbol
hello I am using version 17.4-2022-S008 pspice now. Perfectly i can create a schematic then for the simulate schematic creating new simulation profile. And after writing the name of the file i click on the create button but pspice application completely closing.Can you help me for this problem
@@ahmetaltin2797 Hi, so I'm not sure why that's happening, but OrCAD hotfixes have been a bit buddy lately. I'll check in my version and see what happens.
The error is 'smulations failed because of the netlisting errors' and the error is highlighed at the pins where I added the 'No connect' from the place menu
@@techedkirsch I have managed to solve the problem by connecting a highvalue resistor(100M) to ground. I hope now the situation is similler to a unconnected pin. Thanks for your support!
The top mosfet is in the wrong way! (but the same error in the original post) Even when the top mosfet is suppsed to be off, there will still be current flowing through the body diode. thats why it doesnt go to 0V, because theres a great amount of current generating Vds from the bottom mosfet when its on
Hi Mackey, can you please help me how to fiix this errors in pspice for ti ** Profile: "SCHEMATIC1-LED_Driver_Transient" [ D:\PROJECT_FILES\NLIGHT\01_ELETRONICS_ENGINEER\SIMULATION\LED_DRIVER\PSPICE\SCEMATI Reading and checking circuit ERROR(ORPSIM-15108): Subcircuit AL8860 used by X_U1 is undefined ERROR(ORPSIM-15108): Subcircuit B240A used by X_U2 is undefined ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U3 is undefined ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U4 is undefined ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U5 is undefined Circuit has errors ... run aborted
Explained very simply. Loved the tutorial. Thanks a lot!
awesome video. very helpful for a beginner.
Great Video; Helped a lot
Its really helpful for beginners. Thanks
Can we change W and L of the MOSFET ?? For user's requirement.
Thanks for your explanation.... it is very valuable... But why we have to reduce voltage’s of MOSFET? And what if we chose PNP MOSFET?
I meant by my question is what if we chose PNP? Is it same as NPN ? Or there is something we have to sit?
getting the error "Less than 2 connections at node V_BUS"
how to resolve this
thanks
please send a screen shot to my linkedin or to techedkirsch at gmail dot com, and i'll take a look. you likely have a wire not fully connecting to a symbol
hello I am using version 17.4-2022-S008 pspice now. Perfectly i can create a schematic then for the simulate schematic creating new simulation profile. And after writing the name of the file i click on the create button but pspice application completely closing.Can you help me for this problem
i completely deleted the application then again downloaded and installed but it did not work
@@ahmetaltin2797 Hi, so I'm not sure why that's happening, but OrCAD hotfixes have been a bit buddy lately. I'll check in my version and see what happens.
Hi, I have a question.. Could you let me know how to add a NC(no connection) to a pin of an IC?
@@techedkirsch The problem is I am receiving an error after adding a 'No connect' symbol from the place menu.
The error is 'smulations failed because of the netlisting errors' and the error is highlighed at the pins where I added the 'No connect' from the place menu
@@techedkirsch I have sent you the mail
@@techedkirsch I have managed to solve the problem by connecting a highvalue resistor(100M) to ground. I hope now the situation is similler to a unconnected pin. Thanks for your support!
The top mosfet is in the wrong way! (but the same error in the original post)
Even when the top mosfet is suppsed to be off, there will still be current flowing through the body diode. thats why it doesnt go to 0V, because theres a great amount of current generating Vds from the bottom mosfet when its on
Hi Mackey,
can you please help me how to fiix this errors in pspice for ti
** Profile: "SCHEMATIC1-LED_Driver_Transient" [ D:\PROJECT_FILES\NLIGHT\01_ELETRONICS_ENGINEER\SIMULATION\LED_DRIVER\PSPICE\SCEMATI
Reading and checking circuit
ERROR(ORPSIM-15108): Subcircuit AL8860 used by X_U1 is undefined
ERROR(ORPSIM-15108): Subcircuit B240A used by X_U2 is undefined
ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U3 is undefined
ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U4 is undefined
ERROR(ORPSIM-15108): Subcircuit LEDR used by X_U5 is undefined
Circuit has errors ... run aborted
ERROR...