Yaskawa - Set Speed Reference and Run Command on a GA800 AC Drive

[@HomeGrownComics]

I wonder if these steps would work for a E7B drive

[@YaskawaAmerica]

Thank you for your interest in Yaskawa's Set Speed Reference and Run Command on a GA800 AC B Drive video. Please note that the E7B is an older-generation drive, so the steps shown in the video may not apply directly. However, the speed reference and run command parameters for the E7B are the same.
If you need further assistance, please feel free to contact our Technical Support Team with detailed information about your application and motor specifications. You can reach them at:www.yaskawa.com/support-training/support

[@DEEPAKSHARMA-mz7sy]

How to run up/down function of drive ?

[@YaskawaAmerica]

We appreciate your interest in "Set Speed Reference and Run Command on a GA800 AC Drive." You can find more information about your question at the Yaskawa Solution Center. Here is the on how to run up/down function of drive: solutioncenter.yaskawa.com/selfservice/viewdocument.do?noCount=true&externalId=11573&sliceId=1&isLoadPublishedVer=&docType=kc&docTypeID=DT_FREQUENTLYASKEDQUESTIONS_1&stateId=523&cmd=displayKC&dialogID=25249&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl&openedFromSearchResults=true

[@xavierromero7132]

I have a trouble when I try to control with a potenciometer, the reference never change to A1 everytime the display shows KYP

[@rickdunbar2319]

How should I program a ga800 using a 150psi pressure transducer trying to maintain 90 psi?

[@YaskawaAmerica]

We appreciate your interest in "Set Speed Reference and Run Command on a GA800 AC Drive." You can find more information about your question at the Yaskawa Solution Center. Here is the Basic Setup for a PID Loop on GA800, GA500, and 1000 Series Drives: solutioncenter.yaskawa.com/selfservice/viewdocument.do?noCount=true&externalId=10097&sliceId=1&isLoadPublishedVer=&docType=kc&docTypeID=DT_FREQUENTLYASKEDQUESTIONS_1&stateId=904&cmd=displayKC&dialogID=36826&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl&openedFromSearchResults=true.

[@DEEPAKSHARMA-mz7sy]

I want parameters list of v1000 and GA800 for forward/reverse operation of motor.PLease help me

[@younesrh9726]

hello my freinde i want more explanation from the beginning of programming for example A1-00 to the last 02-00 and withe used encodeur thank you

[@YaskawaAmerica]

Please feel free to contact our Technical Support team with more information on your application: www.yaskawa.com/support-training/support or your local Yaskawa Service Provider - www.yaskawa-global.com/company/profile/global.