Taking apart and fixing Blue Yeti Mic that won't turn on
Вставка
- Опубліковано 4 жов 2024
- If your Blue Yeti Mic is no longer turning on, it seems that the most likely culprit is a faulty/broken Mini USB port. You can fix this yourself, if your even remotely handy. For the cost of a cheap solder iron kit, and a replacement piece you can fix your $100 microphone, and have solder iron around your house to boot
***Affiliate Product Links***
*** (Replacement USB port) - amzn.to/3sOQGkx
*** (Solder Iron Kit) - amzn.to/383EdS5
Thanks, mic suddenly shut off while I was using it and I couldn't figure out why, you're a lifesaver
Thank you so much. This helped me. Fortunately, I only had to squeeze the USD port a little, and now my mic works perfectly well again! You are the hero of the day!
lucky, lucky... wish that was the case with mine
Jeśli faktycznie wylutowałeś gniazdo USB za pomocą lutownicy grzałkowej i odsysacza, to jesteś Mistrzem Świata!
don't get a translation option sorry can't answer
Thanks a ton!
np... glad it helped
As your dentist, I must object
I'm followed by my dentist?
I have a question for you: my yeti mic got the Mute button shoved really hard into it from a fall while i was away.
is there any way to pull it back out again?
yeah the mute button is really only held in with tiny clips. assuming they probably busted in the fall you should probably be able to just pull it out with a little wrench. but to be safe I'd just take it apart like i do in the video and just extract it and make sure it didn't damage anything else in there
I got a DOA blue yeti, it turns on but not picking up sound what should i do?
you ordered it new? then I'd definitely return it... if not then might be worth taking apart and seeing if there are any clear burn marks or disconnections. or of you have a bench power supply you could connect and see where there are shorts, or spray with rubbing alcohol to see what part evaporates quickly to find faults
Do I need to unscrew it to pull the mute button out? My LED for the mute button died and I wanna replace it.
hmmm..i can now, but i don't think it's supposed to be like that .. there are flimsy little clips that look like it should hold it in place but mine are fatigued out enough it just pulls on and off with virtually no force
Did everything. But no light any other good ideas? 😊
not without seeing it. do you see any burn marks on the board where a component burned up? solder joints all look complete?
I had fixed it but computer says not enough power and microphone lights
yuck.. sounds like a board component issue, or in other words above my abilities at the moment in terms of fixing/diagnosing
annoyingly your camera is very poor. Get a decent phone, even old ones from 2-3 years ago have decent auto focus. You can also put ur hand behind the thing ur showing and it will help focus.
ok