I thought about that, but did a bit of online research and it seems they just have a really high gain from the design. Only thing that can be done is to change some component values, to lower the gain, but then you will also lower the maximum volume.
Yes, like I use it it's mono for sure. But probably also by adding tweeters it's still mono, as it only has one tweeter output. Maybe the amplification itself is already mono.
Is the noise that noticeable or is it not too bad? Have you found the solution for it? Or have you found a better board? Trying to build a boombox and I don't really like the "bluetooth ready to pair" voice thing
It's really loud and reproduces well all the frequencies. About the distance, not possible to do a test as it's in another city and I only go there once a couple of months.
@@UltimateDIY thank u for the reply I might give it a try for public speaking. I have a expensive studio monitor that the amp board burn out. So I looking to repurpose it.
I have a creative s750 gigaworks, there is a way to don't cut the rear and link the 2 exit on a bluetooth adapter ? Considering that amplifiers is inside the subwoofer the rca output should also be linked to bluetooth adapter... resistence of speaker is 8 Ohm
@@UltimateDIY I have a creative soundworks s750 and want convert it to wireless... each speaker has the input as your speaker, but I don't want cut the rear cover as You have done and don't want solder the cable extremity with the board... how can I do it ? Moreover I want know if there is a single transmitter to plug the 6 speaker rca output that sends signal to single receiver of each speaker
![How to make loud Bluetooth speaker for just 6$ [Easy & cheap]](http://i.ytimg.com/vi/kfq3cx-3HRQ/mqdefault.jpg)
![How to make loud Bluetooth speaker for just 6$ [Easy & cheap]](/img/tr.png)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
That hiss you are talking about could be the soldering you did, touching some part its not surpose to. check it out, if you haven't done so.
I thought about that, but did a bit of online research and it seems they just have a really high gain from the design. Only thing that can be done is to change some component values, to lower the gain, but then you will also lower the maximum volume.
Interesting module and DIY speaker. I would mount 2 tweeters (stereo) on top of the speaker, pointing forward. I suspect it's mono as it is.
Yes, like I use it it's mono for sure. But probably also by adding tweeters it's still mono, as it only has one tweeter output. Maybe the amplification itself is already mono.
sir mga 100 watts kya yan
What is the module called?
I want to buy one
I don't know more than I mention in the video.
Really good video. Thanks for the info
Welcome!
Is the noise that noticeable or is it not too bad? Have you found the solution for it? Or have you found a better board? Trying to build a boombox and I don't really like the "bluetooth ready to pair" voice thing
It's noticeable at lower volume. I did not fix it and did not search for a different board. I am using it as is.
how many watts that amplifier sir
Honestly, I don't know the real power. Did I not mention in the video what I think it might have?
is it loud with good range for speaking outdoors in traffic? can you do a distance test? These are good things to know like how it sounds and how far.
It's really loud and reproduces well all the frequencies. About the distance, not possible to do a test as it's in another city and I only go there once a couple of months.
@@UltimateDIY thank u for the reply I might give it a try for public speaking. I have a expensive studio monitor that the amp board burn out. So I looking to repurpose it.
Should be a good fix.
@@UltimateDIY cant find it though the links are expiered i think
Where to get this module
Search on eBay.
Good night what's the name of the module
I think I mention in the video what term you need to search to find it, but I don't remember exactly now.
Just try on ebay something like: "bass subwoofer bluetooth amplifier"
They use really stupid names for them...
Superb video my friend. I build karaoke speakers this way. Kind regards. Paul.
Thank you! It is a really straightforward method.
@@UltimateDIY I totaly agree.
Where can I purchase this model ?
Can I put this in one speaker then connect a matching passive speaker to make it stereo?
This particular one I don't think so. Try to search directly a stereo model.
I have a creative s750 gigaworks, there is a way to don't cut the rear and link the 2 exit on a bluetooth adapter ? Considering that amplifiers is inside the subwoofer the rca output should also be linked to bluetooth adapter... resistence of speaker is 8 Ohm
Sorry, but I don't understand what you are trying to do.
@@UltimateDIY I have a creative soundworks s750 and want convert it to wireless... each speaker has the input as your speaker, but I don't want cut the rear cover as You have done and don't want solder the cable extremity with the board... how can I do it ? Moreover I want know if there is a single transmitter to plug the 6 speaker rca output that sends signal to single receiver of each speaker
stringfixer.com/files/505624908.jpg here You can see output rca and input jack
I don't think this is the right module for you. You need a bluetooth transmitter module and bluetooth recievers.
@@UltimateDIY ok ... what components should I buy and how mount it to reach my goal ?
Can i run 100w maximum 50w minimum speaker for this amplifier
I think so.
How to order this module
I think I mention in the video the name you should search for on ebay. I don't remember it.
Wat is the price?
Sorry, but I don't know.
How do you get?
You need to search it on eBay.
What is the Module called ?
Search for "subwoofer bluetooth bass amplifier" and lots of them will show up on ebay
Thanks for the video
Thank you for watching!
What is the price
Sorry, but I don't remember the price. You can do an eBay search and you should be able to find it.
Very Great job...
Thank you!
is this amplifier available on Flipkart or amazon?
I don't know, but you can find it on ebay.
@@UltimateDIY
Me.
HOW AND WHERE DO I REPLACE THE (REMOTE)???????
I have no idea. Try to contact the manufacturer.
What is the product name
Check the video description.
where to buy the power boss?
You can buy it on eBay.
romania ? :)))
Da 👍🏻