@@OurSerenityHomestead PS home depot has the black 6mil sheeting for cheep. Only put it where it wont get a lot of U.V/ sunlight ...like behind the skirted areas....also have some downslope from the skirt to about 10' away from the home. Even if that requires a mild ditch/swale the carries the water somewhere non objectionable.
I love to read. I learn quicker and more thoroughly by reading, (I know that is unusual). I have been building things my entire life. My Super Dad can build just about anything too so I guess that skill was just passed down. I love using my hands to make stuff.
Are you going to insulate or put reflectix on the inside of the skirting or will that be overkill? I am in the process of building a rack for my outdoor firepit...like yours, but I need to figure out how to put a roof on it. Insight?
I dont have to money to buy enough reflextix for the skirt... I wish I did. On the rack, maybe build a 2×4 rectangle enough to covee the tip then elevate it and put a short piece of roofing metal on it. Good luck!
I got alot of free metal from a guy who built large commercial chicken houses. I was always told that the answer is always NO if you don't ask. Therefore, I always ask. Good luck and thanks for watching.
Nice job! I know the skirting on my travel trailer made a world of difference last winter. Will you have to insulate the walls of the crawl space at all?
Thanks Annmarie. I was hoping to line the skirting walls with reflectix insulation but I did not have enough and did not have the money to buy it. Maybe after taxes I can do it.
@@OurSerenityHomestead I just thought you all were in a warmer climate and it wasnt needed LOL. Im going to do reflectix for floor insulation and also crawlspace walls. Seems like it would be better than fiberglass since we have field mice out here
No offense what you're doing will serve the purpose, however you're installing it incorrectly. It's supposed to be running up the other way. Vertically... It would be much more work cutting it, and would probably take a good bit more metal, but anyway, what you have is free and you probably didn't have enough to do it the way I'm talking about.
No offense taken. Yes, it would be better the other way but this was what we had to do with the limited amounts we had. Thanks for watching and taking the time to comment.
All tucked in! Looking forward to your continued progress on the Shabin and property as Spring is not far away!! 💒
Gigi, I need to do the other Shabin now.
@@OurSerenityHomestead Looking forward to watching your progress! ❤
I live in a shabin … glad to find you!
Hey, awesome! Nice to meet you. Thanks for watching and taking the time to comment.
Gotta love free materials! The skirting looks great!
Thanks, Lynette. We love free too.
Yayyyyy exciting wonderful works u two have a wonderful week
Thanks, Lia. You too.
Looks way better with the metal sheets then that plastic skirting great job
Thank you.
I believe when you finished painting it the finished work looks great, wish you would've waited until you finished so we can see it complete
Thanks, sometimes ya have to get the video editted asap.
nice. try to keep things away from your siding, it traps moisture...then rots. Also consider some 6 mil sheeting on the ground under your home.
Thanks.
@@OurSerenityHomestead PS home depot has the black 6mil sheeting for cheep. Only put it where it wont get a lot of U.V/ sunlight ...like behind the skirted areas....also have some downslope from the skirt to about 10' away from the home. Even if that requires a mild ditch/swale the carries the water somewhere non objectionable.
Great job it really don't matter if the metal is vertically or horizontally on there as long as your screw hits a stud and your washer flattens out
Yup. That's what I figure. However I can get the most coverage with the metal I had.
Now you have me wanting to look into codes and laws where I want to set up
Get it going, Missy!!! LOL
I was wondering if you don't mind saying how did you learn to do all that carpentry
I love to read. I learn quicker and more thoroughly by reading, (I know that is unusual). I have been building things my entire life. My Super Dad can build just about anything too so I guess that skill was just passed down. I love using my hands to make stuff.
Would be nice to see how you are framing
I just basically screwed in treated 2x4's from the bottom of the building down to the ground. Thanks for watching and taking the time to comment.
Nice work.
Thank you.
Good job , on to the next one
Yeah, it is seemingly one project after another. Thanks for watching and taking the time to comment.
Are you going to insulate or put reflectix on the inside of the skirting or will that be overkill? I am in the process of building a rack for my outdoor firepit...like yours, but I need to figure out how to put a roof on it. Insight?
I dont have to money to buy enough reflextix for the skirt... I wish I did. On the rack, maybe build a 2×4 rectangle enough to covee the tip then elevate it and put a short piece of roofing metal on it. Good luck!
How easy is it to get free metal?
I got alot of free metal from a guy who built large commercial chicken houses. I was always told that the answer is always NO if you don't ask. Therefore, I always ask. Good luck and thanks for watching.
Looks great. Did you use large screws on the underpinning. I’m trying to figure out what I could use , my underpinning keeps getting blown off .
Thanks, to attach to the building I used 3" deck screws and to attach to each panel the standard 1.5" hex head metal screws. Works great.
You ever figure out a way to insure a shabbin?
Yeah, Shelter Insurance does it.
Nice job! I know the skirting on my travel trailer made a world of difference last winter. Will you have to insulate the walls of the crawl space at all?
Thanks Annmarie. I was hoping to line the skirting walls with reflectix insulation but I did not have enough and did not have the money to buy it. Maybe after taxes I can do it.
@@OurSerenityHomestead I just thought you all were in a warmer climate and it wasnt needed LOL. Im going to do reflectix for floor insulation and also crawlspace walls. Seems like it would be better than fiberglass since we have field mice out here
New subscriber here! Hope you stop by our channel! Thanks for sharing I have a shed that I am going to do this to.
Thanks for watching and taking the time to comment.
No offense what you're doing will serve the purpose, however you're installing it incorrectly. It's supposed to be running up the other way. Vertically... It would be much more work cutting it, and would probably take a good bit more metal, but anyway, what you have is free and you probably didn't have enough to do it the way I'm talking about.
No offense taken. Yes, it would be better the other way but this was what we had to do with the limited amounts we had. Thanks for watching and taking the time to comment.