SIMPLE RC AIRCRAFT CONSTRUCTION, WING CONSTRUCTION WITH styrofoam and resistance wire

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • SIMPLE RC AIRCRAFT CONSTRUCTION, WING CONSTRUCTION WITH styrofoam and resistance wire.
    sponsor.kerimakarpat@gmail.com
    instagram: kerim_akarpat
    Radio controlled aircraft (also known as RC aircraft and RC plane) are small flying machines. These machines are flown by radio transmitters manually controlled by the user on the ground. The transmitter communicates by sending a signal to the receiver inside the aircraft. The ability of the aircraft to move in the desired direction is on the joystick on the transmitter. The control feature is important in the turning and movement of the aircraft.
    RC airplanes are one of the most enjoyable branches of the modeling hobby. But learning to fly a model airplane can take some time. It is a process that is gained through experience. It will be very useful to work with model simulators that provide training by being installed on the computer during the learning to fly phase. Simulators are very useful for making the controls reflex. Before flying, it should be learned what the control controls and control surfaces of the model airplane do and how they work.
    You have to drive towards the wind to lift the RC model airplane. During take-off, the wind should not blow to the side or back of the model. This makes it impossible or very difficult for the aircraft to take off. Particularly, wind blowing from the side may cause the aircraft to lean hard on the opposite side during take-off and the aircraft may be damaged. The same is true when landing. That is, take-offs and landings should be made towards the wind.
    In order to reach takeoff speed, you need to run the plane in a straight direction on the ground as much as necessary. In order for the aircraft to accelerate easily, it should be ventilated from a smooth ground as much as possible.
    Once you have accelerated the plane enough, you can take off using the ascent rudder. Elevator is used by pushing the lever on the right side of the control forward or backward.
    #rchobi
    #rcuçak
    #model plane
    • JİRESKOPUN GÜCÜNÜ KUL...
    • KENDİ FIRÇASIZ MOTORUN...
    • ELEKTRİK KESİNTİLERİND...
    • ÇAMAŞIR MAKİNESİ MOTOR...
    • TURBO JET TÜRBİN MOTOR...

КОМЕНТАРІ • 63