Ooh. Gotta get a Grabbo. Nice cut btw. It’s not always about the money, it’s about a decent nights sleep. Keep em comin. Just doin my first porcelain job.. Thanks lads..
Great cutting well done lads and love the wee de Walt battery cutter need a wee review on that and your blades must be the business I look at porcelain and they break lol
Buenas tardes que agradable ver sus trabajos son bellísimos de buena calidad sus clientes tienen que quedar conforme y agradecidos con tan buenos resultados uds es un excelente profesional y se nota que ama su trabajo saludos y q dios lo cuide y protega siempre 👍 🙏🙏🙏
Bloody marvellous that Justin ! Very time consuming though 😳. Worth the extra effort though . Nice touch lowering the volume for the power tools 😉👌🏼🧱👍🏼
Enjoyed the other video, looks a great job, just a little worried about your ppe. You need to promote the correct eye protection, Fpp3 dust masks or air flow respirators. Set a good example as your channel grows.. Great Stuff, quality work!
Superb Justin diamond rake looks a good bit to have for grinder. Just put a order in there to elite stones. Vanity fine grit blade tile s very good Justin. A use 60 grit and 120 grit for putting that small machined factory edge back once cut. Get beat them dewalt tools buddy don’t we’re a would be with the grinder. 9inch is great option cutting tile less vibration and weight on tile as to the gas saw although a jump between both. Great tips buddy
That vanity blade from elite stone is it or somewhere else lee.yea that rake is good mate not sure if they do less grit or whatever the one henry sent me was good but harsh but still worked lee 👍
@@brickrightbuildinglandscaping Elite stones buddy just ordered another 1 the other day great need to shave another 1mm of a cut or tidy a straight edge
Hi Justin What patience you've got mate to be honest ? We had one last summer just like that in a real awkward spot and my lad popped out and we changed the gully trap to square to suit us lol ? I know it's cheating but to be honest it looked great 👍 last time we did a round one it took us half a day mate 👍 ❤👍another lesson learned on time and money mate 👍 got to admit mate it looks real smart 👍 and well done you 👍 have a good week mate massivecrespect to you and the lads 👍🏴🏴
Hi John Your right again took us a while but i wanted to do it just to see how we managed. We could of changed for square top nothing wrong with it but i wanted to give it a go .I would do it again and people probably do it all the time so wanted a test mate. Take care you and the lads mate 👍 💯
Ben The grinder is brilliant mate i have to say and the battery lasts well on it .its a very good machine id buy it again and again.The large disc cutter which is compatible with the batteries is again a very very goos saw light wait powerful and has water suppression. Down side to this machine is the batteries dont last long enough ive been a bit disappointed with it only for this reason. It is worth mentioning if you have the right blade on it it lasts a lot longer .to by separate batteries is very expensive overall the grinder 10 out of 10 the disc cutter would get the same but battery time lets it down a bit so 7 out of 10 still a good tool to have mate 👍💯 if want more info ring me mate 👍
@Maza Maza Well maza you can by a blade for curve cutting with a curve blade .i never new that and as usual i learn of you guys .brilliant mate and appreciate you sharing i thought you were having a laugh 🤣🤣🤣👍 thanks v much
easier to change the drain for a square one... although if there really is no other option I usually cut the curve half way from the top side with a 4", then transfer the shape to the back and cut roughly the shape with the stihly, doesn't matter if you overcut and make a mess on the bottom.
Fabulous! A true craftsman, who delivers a proper job.
@@yacht2trot I appreciate you saying that 👍
Great cut Justin you always produce top quality ! The brick wall and patio 👌🏻well done lads as always 👏🏻
Glenn Appreciate it mate and good luck to you 👍
Ooh. Gotta get a Grabbo. Nice cut btw. It’s not always about the money, it’s about a decent nights sleep. Keep em comin. Just doin my first porcelain job.. Thanks lads..
Got two grabbos now Harvey and very good.
Good luck with your first porcelain project and thanks mate 👍
Nice bit of cutting there Justin always a tricky day at the office doing that 👍🏴
Thanks Scott
I had to give it a go mate 👍
Great cutting well done lads and love the wee de Walt battery cutter need a wee review on that and your blades must be the business I look at porcelain and they break lol
Alright John
Yea porcelain is a pain to be fair with the breakages 👍💯
Buenas tardes que agradable ver sus trabajos son bellísimos de buena calidad sus clientes tienen que quedar conforme y agradecidos con tan buenos resultados uds es un excelente profesional y se nota que ama su trabajo saludos y q dios lo cuide y protega siempre 👍 🙏🙏🙏
Lo mismo para ti y gracias por todos tus amables comentarios. Cuídate
Justin 👍
Improvise, Adapt, Overcome 👌
Bloody marvellous that Justin ! Very time consuming though 😳. Worth the extra effort though .
Nice touch lowering the volume for the power tools 😉👌🏼🧱👍🏼
Took a while steve just wanted to give it a go.Yea took me a while lowering the volume you noticed mate 🤣🤣👍💯
Great cutting skills👍 me I try change all round things to square tops makes things a little easier
I no about the square top just wanted to try something different. Took a lot of time to be fair .
Appreciate the comments 👍
@@brickrightbuildinglandscaping always got push your self do things different every days a learning day 👍
Use that diamond raker about 15 year ago on marble and granite it work well 👍
Yea it was ok not brilliant but it did a job tom for us
Enjoyed the other video, looks a great job, just a little worried about your ppe. You need to promote the correct eye protection, Fpp3 dust masks or air flow respirators. Set a good example as your channel grows.. Great Stuff, quality work!
Graham
Not gonna argue with any of that .i did try the glasses steamed up straight away .the cutting was mostly wet but good points agree with you 👍💯
Nice cut justin its a shame a flower pot will sit over that when u all leave haha
🤣🤣🤣 probably Mr Haines we have the same surname 🤣👍
Nice, as you say, takes a bit of extra time, but gives a better finish. I'll name that tune in one! :)
Name that tune thats going back a bit now isnt Paul.🤣🤣 thanks mate 👍
@@brickrightbuildinglandscaping Glad I'm not the only one who can remember it :)
@Paul N
Well unfortunately i do aswell mate 🤣🤣👍
Superb Justin diamond rake looks a good bit to have for grinder. Just put a order in there to elite stones.
Vanity fine grit blade tile s very good Justin. A use 60 grit and 120 grit for putting that small machined factory edge back once cut. Get beat them dewalt tools buddy don’t we’re a would be with the grinder. 9inch is great option cutting tile less vibration and weight on tile as to the gas saw although a jump between both. Great tips buddy
That vanity blade from elite stone is it or somewhere else lee.yea that rake is good mate not sure if they do less grit or whatever the one henry sent me was good but harsh but still worked lee 👍
@@brickrightbuildinglandscaping
Elite stones buddy just ordered another 1 the other day great need to shave another 1mm of a cut or tidy a straight edge
@L Milne i speak to henry then thanks lee 👍
@@brickrightbuildinglandscaping
Handy blade to have in the van buddy.
@L Milne
Without doubt lee
Hi Justin
What patience you've got mate to be honest ? We had one last summer just like that in a real awkward spot and my lad popped out and we changed the gully trap to square to suit us lol ? I know it's cheating but to be honest it looked great 👍 last time we did a round one it took us half a day mate 👍 ❤👍another lesson learned on time and money mate 👍 got to admit mate it looks real smart 👍 and well done you 👍 have a good week mate massivecrespect to you and the lads 👍🏴🏴
Hi John
Your right again took us a while but i wanted to do it just to see how we managed. We could of changed for square top nothing wrong with it but i wanted to give it a go .I would do it again and people probably do it all the time so wanted a test mate.
Take care you and the lads mate 👍 💯
I’m looking into buying the 54v dewalt stuff soon. I’d love for you guys to do a review on the grinder and cutter if you could?
Ben
The grinder is brilliant mate i have to say and the battery lasts well on it .its a very good machine id buy it again and again.The large disc cutter which is compatible with the batteries is again a very very goos saw light wait powerful and has water suppression. Down side to this machine is the batteries dont last long enough ive been a bit disappointed with it only for this reason. It is worth mentioning if you have the right blade on it it lasts a lot longer .to by separate batteries is very expensive overall the grinder 10 out of 10 the disc cutter would get the same but battery time lets it down a bit so 7 out of 10 still a good tool to have mate 👍💯 if want more info ring me mate 👍
@@brickrightbuildinglandscaping thanks mate. Really helpful that was! I’ll call you with any more question over the next few days
@@bensmith3613 no worries ben👍
Was there no way to put a low level carrier box over it and just leave that under it ? Sorry if you mentioned it in the Video
Was my choice i wanted to give it a go Rich never done it before now 👍
I’ve never tried one but you can get a curved cutting disc for circle cuts worth looking in to , top job though boyos
Curved disc 🤣 you having me on maza .cheers mate 👍
No I’m not have a Google they have been out years
@Maza Maza
Well maza you can by a blade for curve cutting with a curve blade .i never new that and as usual i learn of you guys .brilliant mate and appreciate you sharing i thought you were having a laugh 🤣🤣🤣👍 thanks v much
@@brickrightbuildinglandscaping I think i remembered that from a old Tommy Walsh diy program ha
@Maza Maza
God that was a while ago.we got blades to do it but id try the blade you mentioned Maza would never of known mate .Thanks again 👍😄💯
easier to change the drain for a square one... although if there really is no other option I usually cut the curve half way from the top side with a 4", then transfer the shape to the back and cut roughly the shape with the stihly, doesn't matter if you overcut and make a mess on the bottom.
Thanks for that Adam yea i wanted to cut it having changed to square grids many times .cheers for the tips 👍💯
Could you let me know the colour and where this porcelain paver is from and the size thank you
All i no is the customer supplied this himself from cardiff slate and stone 👍
Ok thank you very much,you’re work is amazing !
@@janetgoodey5130 no problem. Thanks 👌👍
You can buy diamond tip tool cut hole out with 👍
Hi Tom
Yea i have seen different size core bits now not sure if any good will try one next time around Tom .
Thanks for the info appreciated 👍
Great cutting skills would look even better if it finished flush with top of paving
Just where it was and they should always sit lower .Anyway thanks and appreciate the comment
5 quid for round to square adapter
I no that i wanted to give it a go never done it before now 👍
@@brickrightbuildinglandscaping fair enough 👍
just make a template out of codex 👍
Yea thats an idea cheers Tom 👍
Can’t believe you wear ear defenders and mask but no eye protection
Only because they steam up making it really unsafe .Never found glasses that dont steam up steve