Priming of Centrifugal Pump
Вставка
- Опубліковано 20 жов 2024
- Priming of Centrifugal Pump
GATE mechanical engineering popular 20 videos | Physical significance of mechanical engineering topics playlist;
• GATE mechanical engine...
Priming- If you want to start a centrifugal pump by switching it on, it will not start delivering water promptly. It is due to the fact initially inside the casing of pump air is filled. When we start the pump then lnitially the impeller starts spinning the air inside the casing which cannot develop sufficient centrifugal force to pull the water and deliver it. To make the water to flow, first of all we have to fill the casing with water and then start the pump.In such case the sufficient centrifugal force will be developed and the pump will start delivering water. Further the action of water flow will remain continued because water is entering the pump continuesly (casing is always filled with water not air) so no problem of 'insufficient centrifugal force' arises once the pump starts delivering water. The action of initially filling of casing with water is called as Priming. You can learn the physical significance of priming in centrifugal pumps by this easy to understand lecture.
Thanks mate. I was watching this while priming my well centrifugal pump.. Just to clear my mind..
Simple and sweet explanation. I love it
Super sir.. What I was looking to understand exactly..
Thank you so much sir, this cleared my long-time doubt about priming!! Thankyou
Thank you sir for the clear explanation, easy to understand and easy to eloborate to others if needed to share the information. Thank you again.
Thank you for the tutorial. Your explanation allows many aquarium canister filter owners to know the reason why they need to prime their canister filters.
I finally fully understand. Thank you
my ear is tingling hearing your voice
What an explanation sir hats off.....
Fantastic explanation! Thank you Amit.
Exceptional!! This is the best explanation that I have ever seen on priming. Thanks
Great explanation, question i can't get the priming screw open on a centrifugal pump, but the pump if below water level and when i open a return valve that's right next to the pump discharge water starts coming out, because it's below the water level, if this happens does this mean that the pump is primed right? i mean it's full of water so it should be correct?
Thank you sir, very clear explanation, but continue doing videos sir.
Thank you so
much for the explanation
Very good mentor he is.
Best explanation about priming on youtube
Very beautifully explained
I recently bought a centrifugal pump but it has no priming port. Just the inlet and outlet port. Where do I prime it? Thanks!
It could be self priming....
@@Dr.AmitMandal ty Amit
Nice clarification sir
(With example )
Thanks sir
Hello, thank you for your explanation. Does the diameter of the suction pipe need to be bigger than the delivery pipe?
Yes it does
Very clear. Thankyou
Thank you so much
Pretty nice explanation
jazakallah khair Sir
Great job. Excellently explained
Clear explanation thank you sir
please told me, when when single stage jet pump lifting start the water letter a few minutes loss the pressure and pump is not lifting the water.
At what level minimum water should be fill for priming( inside the casing) or it is necessary to pump casing should be fully filled with water?
Thank you so much. Wonderful explanation.
thnak u sir ji 4 explaining priming.
Kudos to the way of explanation, good job man
Thanks Man
I appreciate
Thank you so much for detailed explanation 👍❤️
good video thank you
Very well explained ...
Technical way of explanation...
Great video! Thank you.
Very nice video ..it's much helpful for me understanding about priming
Splendid explanation
Dear sir kindly clarify my one doubt because I think there is a slight mistake in the diagram that you have showed at 1:54 I think even the suction line should also be shown completely filled with water in the middle diagram or else the pump won't work...what do you think...please reply
This is an indicative explaination for, , 'technically why priming is required ,' it depends on the diameter of suction pipe, if it is sufficiently less no need to fill it with water. strictly speaking there are few more things required, there must be a non return valve at the sump-end of suction pipe. The length of suction pipe must be less than 10 m, Check out my lecture on NPSH.
U are awsome sir
Great explanation. Thanks!
Thankyou
Awesome explanation 👏👏👏
What happens in the self priming pumps? I mean how does it prime itself?
+Ganesh Hosur google it its a big story...
Then why are you making video?
Self priming pump consist of non returning valve in entry pipe which stop water to going back to reservoir when pump is switched off hence casing remains always filled from the water.
Excellent video 👍👍
Excellent explanation 👍
Nice explanation
Very good explanation. Thank you.
Excellent explanation
Very nice explanation!
So good 🙏
Simple and understanding ❤️
Excellent explaination thanks a lot sir
Sir pulling force is directly analogous to the pushing force means??thora feel nahi ho raha h kuki same amount or space ko hi to hm vaccant kar rahe h rotation se
Elaborate your question
Thank u sir good explanation😊
thanks for your lecture.
Sir what will happen if we fill the pump through delivery pipe
Thank you sir
You explained it better
Superb
We need to fill full pipe down to the bottom
Technically yes
Please sir do I need to change any thing in centrifugal pump to use it as turbine generator
francis turbine is reverse cetrifugal pump
Hi! My pump is 200meter away from where i receive water. So I have to go prime the pump every time when I start the motor. And this happens 2-3 times per day. Is there any way the pump can hold water without priming the pump?
Try self priming pump
well explained..very useful
Great explanation
excellent explanation
very nicely explained
Nicely explained.....
Tq so much sir
Very good
Superb explanation
🙏🏿🙏🏿🙏🏿🙏🏿
Very good explanation sir
awsome
Nice clarification
why motor in our houses are placed at low level. Is reason above what u explained?
No that is entirely different story
Tq u sir
very useful for my exam preparation,sir
Best lecture sir
Thanks I understood it
Nice explanation Sir
Super sir
nice explanation sir....
Dear Sir , thanks for the video.....our lecturer has given us a task on this topic....and this is what he ask...try to google search but not able to find it...the question goes.....
What is the “fundamental equation of centrifugal pumps”? What does each term in the equation mean to the working of a centrifugal pump?
Good sir ji
Nice
Great sir
Sir vacuum is created but what is the logic. I mean it's ok vacuum is creat at center but why center and how ?
Good
nice explanation sir👌👌
How can the air effects or damage the impeller?
+Aown Lawati it depends upon blade material
U tell why priming necessary but how it works🤔
what will happen if i start pump without priming
Adequate force or head will not develope due to air thatswhy delivery of water will not be possible
Amazing
this is what i'm looking for
sir.
plz make a video about Air Starting system of engine
Water sucks water, in local language we say put water in pipe water will come . :)
👌👌
so non priming????