I really appreciate you taking the time to make this video. What a great help after dropping my Osmo Pocket, as well and searching for quite awhile for an answer! Kudos!
Just wanna share that I used the stick pad method and also glue down the sticker, but it still won't work after months. But I did not give up my gimbal. So, I just used a nail filer to file down the edge of the camera head and the sticker, and now it works. Thanks for sharing for tricks, you did couraged me to try more before dumping it into the trash can.
I have not used it for a while, and then the problem came back. Before I sent it to electronics recycling, I gave it another try. I spray some "magic" WD 40 to the gimbal joint and put the sticky pad back for a few days. Now it just works excellent every day! I am trying to turn it on every day to ensure it works smoothly. Everyone should not easily give up this.
@@ceciliahui2137 I just used WD 40 on mine just like you said and it seems to have helped a little bit. Thank you for the advice. Hopefully it gets fully better.
@@ceciliahui2137 hey man i know it has been 1 year but could you help me out step by step how you did it, its really annoying and my dad spent alot of money on my osmo pocket thanks dude!
This is genius and really works! I didn't even drop mine but for some reason I had this exact issue all of the sudden. You just saved me a lot of money. Thank you Sir!
You rock! I was afraid on putting pressure on the Gimbal head, but this seemed like a decent solution and best of all, it worker like a charm. Starter a bit low on the height (of my Playing Cards), so had to repeat a couple of times adding 1 card at a time. But in the end it worked out. Hopefully DJI will enlarge the case for the Pocket 3, since this way it didn’t provide the right amount of protection.
Thank you so much! I faced the same problem and when searching for a solution came across your vid. I fixed it as you described, and it works. Kudos!!!
Haha, yeah every OP owner have dropped their baby at least once and your first aid technique to revive our beloved one will come in handy. Good tip :- ))
A mi me tiraron mi cámara al suelo y paso el mismo error Lo solucione apagándolo y girando la cámara manualmente, después calibre el gimbal y volvió a funcionar correctamente
thanks so much... I had same problem today and I was very scared about it.... just tried to puch softly the gimball like you and now is fixed again.... thanks
I really appreciate you taking the time to make this video. What a great help after dropping my Osmo Pocket, as well and searching for quite awhile for an answer! Kudos!
Just wanna share that I used the stick pad method and also glue down the sticker, but it still won't work after months. But I did not give up my gimbal. So, I just used a nail filer to file down the edge of the camera head and the sticker, and now it works. Thanks for sharing for tricks, you did couraged me to try more before dumping it into the trash can.
I did that too, perfekt ;) THANKS
I have not used it for a while, and then the problem came back. Before I sent it to electronics recycling, I gave it another try. I spray some "magic" WD 40 to the gimbal joint and put the sticky pad back for a few days. Now it just works excellent every day! I am trying to turn it on every day to ensure it works smoothly. Everyone should not easily give up this.
@@ceciliahui2137 I just used WD 40 on mine just like you said and it seems to have helped a little bit. Thank you for the advice. Hopefully it gets fully better.
@@ceciliahui2137 hey man i know it has been 1 year but could you help me out step by step how you did it, its really annoying and my dad spent alot of money on my osmo pocket thanks dude!
This is genius and really works! I didn't even drop mine but for some reason I had this exact issue all of the sudden.
You just saved me a lot of money. Thank you Sir!
You rock! I was afraid on putting pressure on the Gimbal head, but this seemed like a decent solution and best of all, it worker like a charm. Starter a bit low on the height (of my Playing Cards), so had to repeat a couple of times adding 1 card at a time. But in the end it worked out.
Hopefully DJI will enlarge the case for the Pocket 3, since this way it didn’t provide the right amount of protection.
Unbelievable, it worked! Thank you so much, you saved my shooting day ✨😀
I had the same issue! I ended up returning it and getting a new one, but good to know if this happens again I can get it fixed!
You were my last hope. And it worked!!!! Thank you thank you thank you. By the way, I did it with playing cards.
Oh wow this actually worked. Thank you!!
Thank you so much. You may have saved me a lot of time and money and a week with not video. I will be getting a back-up camera.
Thank you so much! I faced the same problem and when searching for a solution came across your vid. I fixed it as you described, and it works. Kudos!!!
dude how do you have such few subs like this is quality. keep it up dude
Thanks Sam, appreciate the comment man!
my daughter accedentally drop the device.
That is brilliant Idea,
We tried this and works very well..
Thanks ,
Thank goodness I found this video. It fixed mine!
Thanks! You save my Osmo 🤘🏻
Mate, you little legend! Sorted it!
Same thing happened to me with my Osmo Pocket 2. About to try this trick, thanks for posting.
Did it work?
Omgggg thank you so much! You just helped me!!!! 😊
Thank You very much, I did it and , woaow it's repared !!!!! Fixed the same issue for me.👋
so useful! just fixed mine. Thanks mate.
Glad it helped
thank you for video, this video help for fix my camera.
Damn, it really worked! 😮
I used a plastic keychain tag.
You are an amazing person Thanks!
*grabs pile of sticky notes*
you saved my camera! i used a stack of credit cards instead of the sticky notes
Haha glad I could help!
Thanks a ton !! Fixed the same issue for me.
Wow it really helped me !!!!!!! Thanks a lot ;)
Worked for me. Thank you! ❤️
worked very well!
Thx my friend...you make my day ....!!!! :)
Thank u so much. U saved my camera.
Glad I could help!
Haha, yeah every OP owner have dropped their baby at least once and your first aid technique to revive our beloved one will come in handy. Good tip :- ))
Hahah glad to help!
Same problem 😩💔
Still works in 2023, Thanks. Now I can cancel my Amazon order for a new one.
A mi me tiraron mi cámara al suelo y paso el mismo error
Lo solucione apagándolo y girando la cámara manualmente, después calibre el gimbal y volvió a funcionar correctamente
thanks so much... I had same problem today and I was very scared about it.... just tried to puch softly the gimball like you and now is fixed again.... thanks
Glad it helped!
When you’re working with mechanical forces like this, letting it sit for 30 minutes isn’t gonna make a difference. It’s the initial force you apply.
Worked - thanks brother!
why don't try calibrating it first. there is a feature in the unit.
Same problem but it's not working 😭 i don't know what to do... Help !
this didnt work for me i put the sticky notes for 30 mins and pulled it out and nothing changed
Excelent!!’ 👏👏👏👏
I saved mine by doing a combination of this trick and shaking it really hard lol this stuff is way to fragile.
Oh wait, no I haven't lol.
I had to use a little deck of cards… couldn’t find sticky notes
haha - i am using now a pile of magic cards xD
HAHAHA SAME I ALSO HAD THIS PROBLEM. GG DJI OSMO POCKET