Good video! I just had to open mine cause of a dead fuse, it's incredible that JBL didn't design it with a fuse socket... you literally need to take everything apart just for the fuse.
Thanks this helped me open mine out. Mine was giving very very low volume almost couldn't hear it with all vol maxed out. The only finding was the two power transistors both measure 0.0 ohm between collector and emitter pins no matter what direction you measure. Looks like the are both shorted, but haven't removed them from the board to measure them. Not sure what else could have been taken down if the two transistors shorted.
Recently I purchased eon one all in one 6channel model, while using that, unfortunately my small brother switched the Red switch to another side. It's stopped working. What I have to do now?? Any suggestions
at 06:40 when you turn it on the lights are flashing red, then they are already in green - what did you do to stop flashing red, i have a new jbl one pro and after i discharged the battery it flashes and hasn't come back work. What did you do to stop the red lights flashing? I will be very happy if you can help me. Thanks.
Tried this hoping it would work but the fuse was good. The battery is fully charged but the board is not powering up. Power LED’s not lighting up . Only the green led’s for the battery. Any suggestions besides sending in to JBL ? Thank you !
in case My JBL eon one pro is random power down that's about fuse too? or How to solve the problem. My Dealer is inform me that's mainboard shortage.They will change main board in 424 us dollar.(out of warranty)
Hi I finished doing all these step however the power indicator bars turn greens for at least 5 cycle afterwards flashing red lights appear in the power indicator? I will really appreciate your help!
My eon one pro doesn’t resist al the volume, can you tell me what’s the problem with it? A red light blinks when I put all the volume and the speaker is not loud.
Hola podría ayudarme a mi eon one pro se le cayo una mini bocina y ya la colocamos y la pegamos pero ya no carga y tampoco tiene sonido. Ni con Bluetooth ni con cables. Podría ayudarme por favor
Good video! I just had to open mine cause of a dead fuse, it's incredible that JBL didn't design it with a fuse socket... you literally need to take everything apart just for the fuse.
Thank you
What kind of fuse did you fuse did you use?
Normal 6 ampere fuse
Actually mine was 5A fuse
@@martinchiervo7736 you had the jbl eon one or the jbl eon one pro?
Thanks this helped me open mine out. Mine was giving very very low volume almost couldn't hear it with all vol maxed out. The only finding was the two power transistors both measure 0.0 ohm between collector and emitter pins no matter what direction you measure. Looks like the are both shorted, but haven't removed them from the board to measure them. Not sure what else could have been taken down if the two transistors shorted.
Recently I purchased eon one all in one 6channel model, while using that, unfortunately my small brother switched the Red switch to another side. It's stopped working. What I have to do now?? Any suggestions
Check fuse if broken what I am showing in video,
at 06:40 when you turn it on the lights are flashing red, then they are already in green - what did you do to stop flashing red, i have a new jbl one pro and after i discharged the battery it flashes and hasn't come back work. What did you do to stop the red lights flashing? I will be very happy if you can help me. Thanks.
Check fuse what I am showing in video, after check battery
Hi, if the battery is dead, will the unit still work on AC power? Looking to purchase one, would appreciate your advice.
Yes work,
No work without battery
Hi what power input ur using 115V or 230V?
I asked you one problem still you didn't reply me how can you work this Eon one pro without battery
Awesome Video. If I may ask, does it still work with a depleted battery charge when it is plugged in? Thanks!
Yes
No
Tried this hoping it would work but the fuse was good. The battery is fully charged but the board is not powering up. Power LED’s not lighting up . Only the green led’s for the battery. Any suggestions besides sending in to JBL ? Thank you !
Please visit on service center and check out the fix problem
in case My JBL eon one pro is random power down that's about fuse too? or How to solve the problem. My Dealer is inform me that's mainboard shortage.They will change main board in 424 us dollar.(out of warranty)
Try to change fuse. Then check, if continue still issue showing then motherboard replacement
seriously, the panning of the video and the music was completely unecessary.
Hi I finished doing all these step however the power indicator bars turn greens for at least 5 cycle afterwards flashing red lights appear in the power indicator? I will really appreciate your help!
Ok, most welcome,
My box has the same problem, when I turn on the lights are flashing red and it doesn't work. What should I do?
Don't buy JBL with batteries like Eon One. The cost of battery replacement is 50% of the price of entire unit. I hate it.
My eon one pro doesn’t resist al the volume, can you tell me what’s the problem with it? A red light blinks when I put all the volume and the speaker is not loud.
Try to change battery
Awesome👍👏😊 🙏🤩🤩🤩👌🤘🆒✅✅👍
Excellent stuff keep on uploading.
Thanks
Hi Amit, I think I ordered the wrong fuse. Do you know if these are the 6A 20mm length? I think my 30mm is too long. Thanks!
Find the image at Google image websites, or open the speaker and cross check
Hola podría ayudarme a mi eon one pro se le cayo una mini bocina y ya la colocamos y la pegamos pero ya no carga y tampoco tiene sonido. Ni con Bluetooth ni con cables. Podría ayudarme por favor
Sorry, I can't understand your language
The fuse is fine but the speaker doesnt turn on what all i could check
Check the speaker connection from speaker and motherboard between the cables
please help, why are the battery indicator lights all lit and blinking. power light is off. what should I do. thank you
Check the battery, if dought replace battery
@@amitkeshwar2428I have replaced the battery but it still blinks. Please referral
@@amitkeshwar2428 which happened as it did at 6.40 video duration. but the power indicator light is off
Try to change fuse when I am showing in the video
@@amitkeshwar2428 ok. tks
How to work this set without battery
Hello
Mera eon one pro dead hogya hai
Fuse Naya daalkar chalu krne pr short circuit ho raha hai
Phone no. Dijiye aapka
Cool, now show us how to convert to AC
I will
Kl bluetooth nya suka putus putus. Kira kira sakit apanya ya
changing the fuse its greet problem 😛😛😛😛😛
Mine doesn’t have bass when connected via Bluetooth:-( its EON One anybody can shed the light?
I am having same issue from 1 year. Have you found a solution?
Yes
@@amitkeshwar2428 what is the solution?
Fully bass effect can work on cables, but Bluetooth not provide the strong bass signal
Easy ... He was not dead, just asleep.
No, it's dead, fuse wire broken when I am showing,