Hey buddy at 11:15 you your brakes are strong and you didn’t gain any performance. You have your wires Crossed. So you have to rewire it and run it then
I remember when I converted my latrax to brushless I broke 3 or for 4 drive shafts and at least two gear boxes and stripped the stock spur gear completely.
Change the motor wires around you have the polarity reversed and try a 54 tooth spur and 14 tooth pinion on the motor. Part numbers 7591 and 7592 from traxxas
You may have your wires crossed where you have reverse as forward and forward as the reverse. Also, these cheap ese and mother combos can be used with a program card. I set it up on a Teton and it works great.
Keep your head up buddy. I have the same $hit luck and have my whole life. You get knocked down, get up dust your @$$ off and keep going. It builds character. Also your moto wires are sdrawkcabackwards. Flip any 2 and your golden (works only on brushless). That terrible sound is little pieces or rock/dirt that get in where the driveshaft goes into the differential. I have the same ride and I've learned all this the hard way also. Limit donuts in the fine stuff and it won't happen as often. When it does clean it out right away or you will need a stack of gears.
I run hj 2200ma 25c 2s lipo with same goolrc motor and esc with 14 t pinion the battery is a little bit long so I had to strap it also deans t plug on battery. The battery is only 12.99.
Okay so I switched up the wires in about 10 combinations and I couldn’t figure it out Is there a way that you can rephrase it And maybe I’ll understand🙂
Hey buddy at 11:15 you your brakes are strong and you didn’t gain any performance. You have your wires Crossed. So you have to rewire it and run it then
What wires do I switch around
The motor
Best video I found for you
ua-cam.com/video/mqOkPbOr0LA/v-deo.html
When you fix it and do a video make sure to give me a shout out and sub
Either way please let me know m, I’m just trying to help out a fellow UA-camr
11:15 Time stamp
You’re running it in reverse when driving forward. That’s why your brakes are so strong. You have your wires crossed.
That makes so much sense now
I remember when I converted my latrax to brushless I broke 3 or for 4 drive shafts and at least two gear boxes and stripped the stock spur gear completely.
O my😂 that’s a lot of things!
I love how you used the needle nose with a rubber band for a vice!
Hahaha ya
Love your videos Bro.. Learning alot from you!!
Thank you so much😁
Change the motor wires around you have the polarity reversed and try a 54 tooth spur and 14 tooth pinion on the motor. Part numbers 7591 and 7592 from traxxas
You may have your wires crossed where you have reverse as forward and forward as the reverse. Also, these cheap ese and mother combos can be used with a program card. I set it up on a Teton and it works great.
you have a good head on your shoulders my friend thanks for the vid
Keep your head up buddy. I have the same $hit luck and have my whole life. You get knocked down, get up dust your @$$ off and keep going. It builds character. Also your moto wires are sdrawkcabackwards. Flip any 2 and your golden (works only on brushless).
That terrible sound is little pieces or rock/dirt that get in where the driveshaft goes into the differential. I have the same ride and I've learned all this the hard way also. Limit donuts in the fine stuff and it won't happen as often. When it does clean it out right away or you will need a stack of gears.
Bro relly said "Whole" in stead of hole💀💀💀💀
Change to 14 t pinion
I run hj 2200ma 25c 2s lipo with same goolrc motor and esc with 14 t pinion the battery is a little bit long so I had to strap it also deans t plug on battery. The battery is only 12.99.
That is so cool! I also have a 14 tooth pinion.
When driving forward your driving it in reverse so if you switch up the wires everything should be fine
Ok
Okay so I switched up the wires in about 10 combinations and I couldn’t figure it out
Is there a way that you can rephrase it
And maybe I’ll understand🙂
Did you watch the UA-cam video I sent you
No can you give me the title
Latrax Prerunner GoolRC 4800KV Brushless
Motor and ESC Upgrade
You do such a great job with your videos Nathan! I enjoy the scripture at the end :)
Thank you so much!
I believe you have the polarity reversed on you motor should be way faster than that.
How do you reverse the polarity
You just need to flip 2 of the wires. Not sure which one cause there not marked like you said.
Thank you so much I’ll try that!
You have the polarity wrong. Switch 2 wires going to the motor and it will run 25+
Thank you so much
Nice video! I see your close to a big goal!! Good luck, here's another sub to support our community!! 🔥😎👍
Thank you bro!
No I think it’s your diffs because mine did the same thing
Ok I’ll keep that in mind next time it happens.
Nathan, are you using the stock LaTrax battery?
Yes
It’s your battery your using the wrong one use lipo
Hole not whole