Great video. New trim looks superb! Do you have a video showing how to remove the drivers side lower trim in a Mk2 Leon? I have suspected failed door blend actuator that I'd like to investigate.
Hey David, cheers for watching. Yeah really pleased with how the trim looks. I now have a steering wheel to match as well. Do you mean the plastic trim strip thats across the handle/middle of the door card? There's a small cut out on the far right hand bottom edge. Pop a wee plastic trim removal tool in there and gently prise it up and work ur way along carefully. If it's the large inner triangular trim insert above that piece u want to remove, once the plastic strip is out the way, you can grab the lower left corner of the insert, lift it up and prise it away. These bits can be tricky if it's never been off before, a bit of brute force needed 💪🏻😂 Hope that helps 👍🏻
Hello, I saw you have some sort of green clips around the first trim you pulled off, could you tell me were I can find them because my trim doesnt lock properly, thank you and very nice car.
Hi, thank you, and as for the small clips I'm not sure where u can get them from. Mine have always been there from factory, and yes they hold in the trim firmly. A Seat car dealership may be able to help you with sourcing them? I wouldn't even know what to call them to search for on the internet, sorry.
Where did you get it done mats and how much this is epic I'm like a massive Leon head had loads I'm doing this also do star light roof £50 Amazon 300 fiber optics
Hey mate, I had the dash done from a guy called Josh, he has a company JH hydro's and he can hydrodip pretty much anything in loads of different designs. Give him a shout on his Facebook page, u can check out his previous work there too 👍🏻 😁 (link below) facebook.com/JH-Hydros-107382317676090/
Wrapping it with vinyl?? Yeah I'd recommend taking the trim off 1st so you can get it around the edges properly. I imagine it'd be quite fiddly working on it while it's on the dash.
Yep, the time is through the MFD, using the steering controls and find the date/time setting on the instrument cluster. The house address/home address is on the sat nav menu (not the map) press the 'setup' shortcut button, scroll down and home address should be at the bottom, then edit it from there 👍🏻
Great wee video mate definitely gonna subscribe used JH hydros for my carbon dipped mirror caps love them really good quality job and the shine on the stuff is amazing im looking at doing this in future but im unsure
Just depends on the look you're going for, and possibly in extreme sunny weather there'll be a good bit of reflection from the gloss, but I'm in the far north, so sun doesn't visit here often!😂 I love the transformation though!👍🏻 I've carbon mirror caps to go on too, but waiting to fix my dodgy folding mirror 1st (another vid🙈) Thank you for subscribing and dropping a comment 😊👍🏻
@@NorthCoastWorkshop so i saw on map im in perth so i see rain more than sun you could say 😂😂😂 but i have a black leon 1.6tdi 2012 absolutely love it its my second car ive owned and i spoke to josh and he can do colour in the carbon so that has definitely tempted me a little 😂😂 but his prices are really good for the quality of the work
Yeah he is very reasonable, and I have seen the colour elements too, look v nice. Tbh all of his work, outrageous or not, looks awesome! If ur on insta (I might already follow you) pop some pics through to me whenever 👍🏻
JH Hydros is based in the UK, yes. If you cover delivery costs I'm sure he'd do it for you, but I imagine shipping/delivery costs would be expensive 💰💰💰😬
To subscribe to my Free Monthly Car content Newsletter, and gain access to the Completed Job cards, click the link
▶ northcoastworkshop.com/freestuff
Finish was really nice 😍
Cheers mate 👍🏻 I was really pleased with the final result on it 👌🏻
Great video. New trim looks superb! Do you have a video showing how to remove the drivers side lower trim in a Mk2 Leon? I have suspected failed door blend actuator that I'd like to investigate.
Hey David, cheers for watching. Yeah really pleased with how the trim looks. I now have a steering wheel to match as well.
Do you mean the plastic trim strip thats across the handle/middle of the door card? There's a small cut out on the far right hand bottom edge. Pop a wee plastic trim removal tool in there and gently prise it up and work ur way along carefully.
If it's the large inner triangular trim insert above that piece u want to remove, once the plastic strip is out the way, you can grab the lower left corner of the insert, lift it up and prise it away. These bits can be tricky if it's never been off before, a bit of brute force needed 💪🏻😂
Hope that helps 👍🏻
looked great
one question is the tablier and the door panels hard plastic or soft to the touch?
Cheers 👍🏻 One part of the door panel, the inner curved piece is soft to the touch but everything else on the doors is hard scratchy plastic
@@NorthCoastWorkshop and what about the tablier?
Sorry I'm not sure what u mean by tablier?
@@NorthCoastWorkshop sorry i mean dashboard hahaha
Ah, the top of it is every so slightly soft, and the bottom half is hard plastic 👍🏻
Nice video buddy , best regards from Mexico
Ah thank you 😁 thank you for watching, and best regards from the UK 👍🏻
Hello, I saw you have some sort of green clips around the first trim you pulled off, could you tell me were I can find them because my trim doesnt lock properly, thank you and very nice car.
Hi, thank you, and as for the small clips I'm not sure where u can get them from. Mine have always been there from factory, and yes they hold in the trim firmly. A Seat car dealership may be able to help you with sourcing them? I wouldn't even know what to call them to search for on the internet, sorry.
@@NorthCoastWorkshop Okay then, thank you .
Where did you get it done mats and how much this is epic I'm like a massive Leon head had loads I'm doing this also do star light roof £50 Amazon 300 fiber optics
Hey mate, I had the dash done from a guy called Josh, he has a company JH hydro's and he can hydrodip pretty much anything in loads of different designs. Give him a shout on his Facebook page, u can check out his previous work there too 👍🏻 😁 (link below)
facebook.com/JH-Hydros-107382317676090/
Hello, good video!
Could you help me, what size torx screwdriver did you use to take off the Dash Trim?
Thanks!
Hey Grego, sorry for the late reply.
It was a T25 torx bit I used, cheers for watching 👍🏻
Santa got a brand new carbon wrap 😂😂👌
😂😂😂 yeah, didn't realise I had even done it until editing 🙈
merry Christmas all 👋🏻🎅
Is it possible wrapping it without taking any bits off?
Wrapping it with vinyl?? Yeah I'd recommend taking the trim off 1st so you can get it around the edges properly. I imagine it'd be quite fiddly working on it while it's on the dash.
Thank you for sharing bro 🙏🏽🙏🏽🙏🏽
Ur welcome
@@NorthCoastWorkshop please update a video how to warping
@@Harini.vazhvethavam do you mean wrap, as in wrapping something in sticky vinyl? Hoping to do a video on something like that soon 👍🏻
@@NorthCoastWorkshop thanks bro I’m living in Germany maybe spelling mistakes 😂😂😂
@@Harini.vazhvethavam 😂 no problem at all, your English is better than my German 😂
Can u plz tell me how to change the time and house adresss on sat nav plz
Yep, the time is through the MFD, using the steering controls and find the date/time setting on the instrument cluster.
The house address/home address is on the sat nav menu (not the map) press the 'setup' shortcut button, scroll down and home address should be at the bottom, then edit it from there 👍🏻
@@NorthCoastWorkshop cheeers bro
Great wee video mate definitely gonna subscribe used JH hydros for my carbon dipped mirror caps love them really good quality job and the shine on the stuff is amazing im looking at doing this in future but im unsure
Just depends on the look you're going for, and possibly in extreme sunny weather there'll be a good bit of reflection from the gloss, but I'm in the far north, so sun doesn't visit here often!😂 I love the transformation though!👍🏻
I've carbon mirror caps to go on too, but waiting to fix my dodgy folding mirror 1st (another vid🙈)
Thank you for subscribing and dropping a comment 😊👍🏻
@@NorthCoastWorkshop so i saw on map im in perth so i see rain more than sun you could say 😂😂😂 but i have a black leon 1.6tdi 2012 absolutely love it its my second car ive owned and i spoke to josh and he can do colour in the carbon so that has definitely tempted me a little 😂😂 but his prices are really good for the quality of the work
Yeah he is very reasonable, and I have seen the colour elements too, look v nice. Tbh all of his work, outrageous or not, looks awesome!
If ur on insta (I might already follow you) pop some pics through to me whenever 👍🏻
Hi!, this trim pack can only obtain in UK? thx
JH Hydros is based in the UK, yes. If you cover delivery costs I'm sure he'd do it for you, but I imagine shipping/delivery costs would be expensive 💰💰💰😬
You just for a new fan on my son's account so you just for 2 new subs