How I Laminate Stickers | step by step tutorial for laminating glossy stickers
Вставка
- Опубліковано 16 гру 2023
- Hello everyone! I get asked all the time how I laminate my stickers so I thought a full tutorial would be helpful! :) this is how I laminate all my glossy stickers for my small sticker business.
Connect with me ♡
→ Shop tabsartshop.com
→ Instagram / tabsartshop
→ TikTok / tabsartshop
Shop products used →
www.amazon.com/shop/tabsartshop
NO COPYRIGHT MUSIC | COMMERCIAL SOUNDS FROM CAPCUT
Have a great day and thanks for watching!
With love,
Tabitha, Tabs Art Shop
♡ - Навчання та стиль
Wow thank you so much! I’ve been researching so much if I can use thermal laminate pouches and then put it through the circuit and you answered all my questions! Life saver
The stickers are so adorable!
This is such a gamechanger! Thank you so much❤
Thank you, that was super helpful as I thought the only way to laminate was to use self adhesive and I just know I'd struggle to use that without any bubbles and sticking to things I don't want it to stick to!! But splitting a thermal laminating sheet is such a great idea 🧡
Yes thermal is so much better! I always got bubbles with self so I definitely prefer this way! :)
Ahhh thank you for sharing ❤
Thanks for sharing another great vlog. I was wondering if you could so kindly do a vlog on how you make your suncatchers. I have been working on these myself and was wondering if there were some additional tips or tricks that could help me. Thanks again for sharing and many blessings to you in 2024.
Thank you for this video it's really helpful for me as I'm thinking if making stickers
You’re welcome! :)
Thanks!!!
Great vidéo thanks ❤
Good job 👏🏻 May I ask what are cricut settings did you use?
Thank you for showing how to laminate stickers I didn't know these sheets existed. Everytime I use the sticky laminate I waste printed sheets.
Ok thats cool. I had no idea my laminator would do that
Thank you I hate self adhesive always mess it up
Great video may I ask what setting you used on your Cricut machine? I have the Maker and want to do this for car decals.
What material and cut settings do you put on your machine and what sticker paper do you use to print? I struggle with getting my cricut to cut deep enough to get the stickers out
Tfs😊
Qual a configuração que você usa na cricut para fazer o corte?
What setting did you use on the Cricut
Does this make stickers waterproof
I tried this method and my sticker sheet is curling really bad I used the exact same laminating pouches and I have a scotch laminator which I heated on the 3 mil option, once cut out the individual stickers are still curling, enough to pull the edges up slightly is there anyway to remedy this? I thought this was such a good idea.
Great tutorial- excited to try this out- what pressure do you use to get the Cricut to cut these out? Cardstock?
I'd also like to know
I guess she's gatekeeping that answer
@@darcywoelffer2322I was able to use the poster board setting on my explore to get them to cut. Sometimes I use my deep cut blade and sometimes I don’t. Hope that helps
Do you use 3 mil or 1.5 mil for stickers?
3m is 30micron lamination sheet?
Thank you! I will try! :D
can you recommend the printer paper and printer?
I am looking for the good printer and paper, but I don't have any luck yet. :(
Yes, check my Amazon storefront link! :)
@@tabsartshop doesnt have the laminator in there
Are the stickers still flexible after laminating, for example to place them on a cup? Thanks for your videos, they are super helpful
Yes but if there are smaller details they may start peeling up slightly after a while if placed on curved surfaces. But I have my JiJi sticker on a Starbucks tumbler and still great after months! :)
Hi there! Your stickers look SO good and so professional! Do you ever have any problems with adhesive getting stuck in your laminator or just general cleaning issues with it? I want to try your method instead of using self adhesive laminate sheets but i'm worried about the longevity of my laminator! Online i'm reading that it's best to make sure the laminate sheets are as aligned with the sticker sheet as possible and leave no part of the sticker sheet exposed.. but I do wanna try to save on laminate sheets like you were in the video :)
I’ve been using the same laminator for two years! So no problems yet! :)
@@tabsartshop that's awesome! Thank you ❣️❣️❣️
Great video! Quick question, doesn’t the hot setting mess up the adhesive of the sticker? I thought I couldn’t to do them on hot, only cold to avoid damages to the sticker? Thanks again for the video
Hi! They are still sticky afterwards! It could depend on how hot the laminator gets but I haven’t noticed any difference with the adhesive.
@@tabsartshop thanks for the feedback!
hello, does this affect the flexibility of the stickers? thinking of laminating a sticker wrap for my film camera
laminating does make them thicker and not quite as flexible. So definitely keep that in mind! I do have one on my tumbler and it's been fine though!
Did you apply for licensing for the Miyazaki character designs? I’m trying to figure that part out for vids and possibly a shop… thanks!
You can make and film videos for whatever you want. But I would focus on doing your own original drawings if you’re going to open a shop.
What settings do you use on cricut to get such a clean cut?
it all depends on paper type, blade, and thickness. If you notice it not cutting through, keep upping the settings. I would try a custom one.
I’ve been using Acetate! Only had to do a second pass on intricate cuts, bowed mat, or dull blade. I’m always looking for a quick setting.
What material setting did you use for these cuts?
also wondering this! i would love to know since i’m thinking of laminating stickers myself :)
I have found using heat effects the ‘STICKINESS’ of my stickers…they actually come off after a few days.
Did you have to adjust your blade pressure for the laminate?
No, I use default pressure!
Can you laminate right after printing your stickers or do you have to wait for a few hours?
I laminate right after!
Do you think these would work well on glossy sticker paper? Or would you recommend sticking with matte paper?
This is glossy sticker paper :) I haven’t tried matte laminate yet!
Cut setting used? Thx you
I use Acetate when doing this laminate process. Depending on the blade sharpness and intricate cuts you might need to do a second pass.
Would laminating stickers allow them to be placed on cups and thermos?
For the most part! Laminating does make them more water resistant. But it also makes them thicker so sometimes designs don’t work as well on curved surfaces.
Amazing, I do think every laminator might be different as I use own gear and as soon as you pick the sticker back up after placing it, it peels for me
It probably does depend on sticker paper type, laminate brand, and how hot the laminator gets. But I’ve never had mine peel!
how thick is your thermal pouches? i use 125 microns and it peels off 😢
These are 3M pouches. If it’s peeling off I would assume it’s not getting hot enough.
I have a faster simpler method of laminating a lot of stickers to sell. However, even though I add a slit for peeling my stickers in the back, there is still the danger of the customer not seeing the slit and peeling the laminate off thinking that's how you're supposed to peel them. I'm looking for ways to make laminated stickers secure from having the laminate peeled off. Does your method prevent someone from peeling the laminate off?
Yes the laminate does not come off!
I have a question. Did you print your stickers on a regular piece of paper and then put the laminating sheet on it? I’m worried that if I do that, I’ll get a different result.
No, they are printed on sticker paper!
I'd really like to know what laminator you're using because I was under the impression you can't laminate a single side with a lot of them? And I don't see it in your Amazon link
it's a hopvision but I'm not sure they make them anymore. It has more to do with the actual sticker paper and laminate though.
how the heck do you manage to not get your laminator jammed when laminating stickers?
This only works for die cut stickers, I would assume?
I haven’t tried laminating sticker sheets yet! but I’m should you can.
Oops sorry, also sticker paper used? Thxs
Sticker paper is linked on my amazon storefront linked in description
How micron? ♥️
These are 3M pouches
Hi! I did my stickers and they looked perfect. However when i wanted to apply it the laminated part peeled off without the sticker paper 🤔
I’ve never had that happen with the materials I use! It sounds like yours didn’t adhere to the paper. Did you run through laminator?
I have te same problem. They turn out really pretty but the laminate peels off easier than te backing. If I set the temperature higher the stickers crinkle because its too hot. I even tried different types of sticker paper and 2 different laminators :(
@@sunflowersonthemoon4729 Hii, I'm having the same issue. Did you find a solution for it?